Combine Sheets Using VLookups And Pivots?
Dec 8, 2013
I have 3 sheets in my workbook, DataA, DataB, and DataC
Data A contains:
ID_customer
and 4 variables A-D
DataB contains
ID_Customer
and 4 different variable W,X,Y,Z
Data C contains
ID_customer
and other 4 different variables
Request: I need to analyses the relationship between the variables using a Pivot table.
My thoughts so far: I think that I need to combine all the information onto one sheet first and then use the pivot table function, but its currently unable to combine onto one sheet, due to Id_ customer numbers appearing several times in DataB and DataC (and not always the same number of times in both), I need to retain all the information from DataB and DataC
I have attached a sample of my data : DataA.xlsx
View 6 Replies
ADVERTISEMENT
Jan 29, 2009
Basically i need to type in a formula in sheet 1 under each of the months that will match the account name and location from B1 and C1 to the data range in sheet 2 (Columns B and C) and return whatever value is listed on sheet 2 under column E. My gut tells me I need to use multiple look ups but I've tried this and got numerous errors.
View 9 Replies
View Related
Sep 20, 2008
I am using this formula
=IF(SEARCH("pipe",A2),VLOOKUP(C2,Sheet2!A4:B12,2))
to look up a reference code for "pipe". The reference codes for "pipe" are in column 2 of a table on sheet 2 and are dependant on the dimensions of the pipe given in column 1 of the same table. C2 in the formula is where the dimensions are given. (hope that's clear ).
What I want to do is to extend the above formula to look up column 3 of the table on sheet 2 if, for example, A2 contains "Bend", i.e., =IF(SEARCH("Bend",A2),VLOOKUP(C2,Sheet2!A4:B12,3)).
Combining those two formula using "=if(and " worked for me for the first test, but changing the contents of A2 from "pipe" to "Bend" results in a #Value type error.
I can't use if A2 = "pipe" because extra words could be introduced into A2, e.g., "copper pipe" - therefore the equals would not be appropriate.
View 9 Replies
View Related
Aug 26, 2009
I have 2 pivot tables in an Excel Sheet (Pivot A and Pivot B). They have different structures i.e. the table headings are different. I need to sum the "Grand Total" values from each of these pivots. Can anyone explain if the following is possibe:
1. Can you combine 2 pivots with different structures in order to acheive a single Grant Total value?
2. Can I create a formula which adds the 2 separate Grand Total Values?
View 2 Replies
View Related
Feb 22, 2008
there's a way to pivot data from two sheets (both the sheets and the pivot table are in the same workbook)?
View 9 Replies
View Related
Feb 29, 2008
I'm working on a macro which compares values in particular cells across different versions of a sheet. Unfortunately there are quite a lot of values, and my code is running very slowly.
I'm trying to get the data in a grid, with the file version across the top, and down the left the project name. For each file version I need to look up a specific value for every project listed.
At the moment, my macro is creating a seperate formula for each cell which does a vlookup on the project name to the specific external file.
The relevant bit of code is below
At the moment its runnig to slow by several orders of magnitude, Working on a 4 by 10 grid it takes about a minute, and I'm going to need it to be able to handle a 50 by 800 grid.
While the code is running, the CPU is not maxed out, so I'm assuming that its the calls to the file system which are taking all the time.
Application.ScreenUpdating = False
Dim ccount As Integer
Dim rcount As Integer
Dim sFilename As String
Dim sPath As String
With ActiveSheet
For ccount = 1 To Range("c1").End(xlToRight).Column - 2
sPath = Left(FileNamesList(ccount), InStr(FileNamesList(ccount), "Pipeline ~") - 1)
sFilename = Right(FileNamesList(ccount), Len(FileNamesList(ccount)) - InStr(FileNamesList(ccount), "Pipeline ~") + 1)
For rcount = 1 To Range("A65536").End(xlUp).Row - 2
by SDB.xls]Pipeline'!$A$1:$AO$300,3,0)
Cells(rcount + 2, ccount + 2) = "=VLOOKUP(""" & Cells(rcount + 2, 1) & """,'" & sPath & "[" & sFilename & "]Pipeline'!$A$1:$AO$300,3,0)"
Next rcount
Next ccount
End With
View 9 Replies
View Related
Jun 2, 2014
Create a macro which will combine three different sheets with their names from 10 to 15 sheets.
View 1 Replies
View Related
Sep 9, 2009
Combine to sheets in one sheets using macro ...
View 9 Replies
View Related
Sep 18, 2008
How to combine two worksheets (sheet 1 and sheet2) to a sheet named “combined”?
Sheet 1 and sheet 2 contain data wich is filled up by using formulas. The data range is from col A to F with headers in the first row, the length is variable.
Here’s an example:
Sheet1
ColA ColB ColC ColD ColE ColF
33 44 46 84 36 567
10 12 56 98 100 64
0 0 0 0 0 0
0 0 0 0 0 0
Sheet2
ColA ColB ColC ColD ColE ColF........
View 9 Replies
View Related
May 22, 2009
I have a workbook with a Sheet named Main Data. The sheet named Main Data, I want to leave alone. The remaining 8 or 10 worksheets (the number of sheets can vary), I would like to take the range A2 to the last row in AH that has contents in it and paste those ranges from each worksheet into one new worksheet so that they do not overlap. I don’t know how to do that so the range I am using in the code below is A2:AH60000 consequently it will not copy the entire range from each worksheet because there are not enough rows in the destination sheet.
View 2 Replies
View Related
Apr 15, 2007
I have a worksheet that has about a dozen sheets that are all the same, just different data. Each sheet is like a checkbook register that has date, memo, amount.... each sheet is for a different account. I have a form that I enter the info into, it puts it into the right sheet and sorts that sheet. This part all works.
But now, I want to take all the info from the different sheets and combine it into one master register sorted by date. I won't make changes to info in this master register, it would just be for info, so it doesn't have to work backwards. I need this to be automated.
Obviously, it's easy to copy all of them to different areas in one sheet, but I want to have them all in the same columns, and that is what I can't figure out. My sub registers don't have the account name listed for each entry, as it isn't necessary as the registers are labeled. But, the entries in the master register would have to have them to figure out where they came from. I can solve this by adding it to the sub accounts and hiding it or something if that is the easiest way. I also need to make sure it doesn't remove duplicates.
View 9 Replies
View Related
Jun 29, 2011
I have an excell spreadhseet that has more than 100 sheets and I would like to combine all these sheets into one master sheet (Sheet1 = MasterSheet) within this workbook. Each sheet has different number of rows used. I just want used ranges to be copied over to a master file appending the previous copied range.
Sub MergeSheets()
Dim strSheet As Object
Dim LR As Long, LC As Long
Sheets("Sheet1").Name = "MasterSheet"
LR = Cells.Find(What:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row
For Each strSheet In Sheets
If strSheet.Index 1 Then
[code]....
View 5 Replies
View Related
Jan 30, 2014
I have three spreadsheets. They all contain different data but each one has a 'Rental Equip ID' column. Is there a way to take these three spreadsheets and consolidate in to one spreadsheet with all the data on one sheet? I have included an example of each sheet. The column headers are in bold. I can send an example file examples if needed.
Rental Dscr
Rental Equip ID
Rental Group
Rental Sub Group
Rental Qty
Rental Cost
BALL JOINT ADAPTERS 4WD
004-0302
13
2834
1
$ 50.22
[Code] ......
View 7 Replies
View Related
Jun 13, 2013
Here is basically the problem, I have 2 sheets and want to copy/ paste them like this:
Sheet 1
Name of a product
Data 1
Data 2
Data 3
[Code]....
Can this be done in Excell 2007?
View 5 Replies
View Related
Dec 16, 2009
I need to combine the category sheets back into one main table, knowing that there may well be an increase in the number of categories, as well as the number of rows in each category sheet.
I have attached a sample workbook - if anyone can help me with the code so that when the macro is run, the data in sheets A, B and C are combined into Main Table.
the macro would also then update the Pivot table, that would be the icing on the cake (I have shown the pivot table configuration I need, in this case using only the data from sheet 'C', for reference)
View 6 Replies
View Related
Dec 27, 2012
What I would like to do is combine all data (from sheet: Page1,Page2, and Page3) into one sheet named 'Consolidated'. Unfortunately, as you will see from the attached file, my programming and understanding of VBA programming is pretty naive.
What I am after is, when I combine the data, from all sheets into the one, the data should be
1. Automatically Sorted by Patient Name
2. Group, results of the same patient from all sheets one below the other in seperate rows
3. Delete any other rows that may have a patient name and ID, but rest of the rows (New Mole,Clinically Suspicious......Benign Naevus) are blank. (This happens because of the way I have designed my userform. For first visit the details are entered in Page 1, then for second Visit Details are entered in Page2, and for third visit in Page 3. So when I enter the first visit details, the Patient Name and Patient Number are copied into Page 2 and Page 3 even though the other details remain blank. I have done it this way because, if say the Patient comes for visit the second time, the clinician may or may not be aware which visit this would be for the patient. So as soon as they enter patient number, it will give them a message that Patient already exists. So when they click Open Existing Patient Record, the form autopopulates with any notes from their previous visit into the respective page (i.e Page 1,Page 2 or Page 3).
Page 1 (Page 2 and Page 3 are exactly the same)
Patient Name
Patient Number
New Mole
Clinically suspicious
Changed from mapping Photo
Level of Suspicion: Score
Monitor
[code].....
View 3 Replies
View Related
Jun 6, 2014
I have 2 sheets with a list of account numbers and values on each (Column A = AccountNumber, Column B = Amount)
I want to combine this on Sheet3 which should include all accounts on the other 2 sheets. Some AccountNumbers only exist on on one of the sheets.
Sheet1
A..100
C..200
E..400
Sheet2
A..200
B..100
D..200
Sheet3
A..100..200
B.....0..100
C..200..0
D.....0..200
E..400..0
View 9 Replies
View Related
Sep 8, 2009
I am trying to do is to combine multiple sheets from multiple workbooks if in the created parameters table it has a 'y' next to it. (So you can specify which workbooks to copy from and which worksheets to copy from) - please see example file to get a better understanding.
Example file:
Master
What I have is a parameters table which defines which workbook/worksheet to look in (please see attachment) on the 'parameters' worksheet.
I also have a 'raw data' worksheet within the same workbook where I want the combined data to go.
File a.xls/b.xls/c.xls etc
Theses are the workbooks where all the data is held which I want to combine, each workbook is the same, just different 'data'. - they are all in the same path too.
In the first column in the parameters table I have the available workbooks:
a.xls
b.xls
c.xls
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that workbook or a 'n' if I don’t.
In the second column in the parameters table I have the available worksheets:
sheet1
sheet2
sheet3
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that worksheet or a 'n' if I don’t.
In the attached example I have code which loops through each file a,b,c dependent whether it has a y/n next to it but I need some code to get it to copy data from the specified sheets in the second column (if it has a Y next to it) in the parameters table to the raw data worksheet in the master workbook with the filename of where the data came from in column A (eg A.xls).
View 3 Replies
View Related
May 4, 2007
I have data in two sheets. None of the sheets the rows and columns are fixed.
I want to copy the data from the two sheets and paste it in the third sheet. I have attached a sample sheet for reference. I need to set it in page width so that I can print that.
View 3 Replies
View Related
Jun 27, 2013
I work for schools use data to guide teachers practices in the classroom. My main function is to mine down through data for kids that teachers focus on specific skills with specific children.
I start with a big conference each summer. By hand I combine, by student name, the data collected over the past school year. We then tear down to student levels setting goals based on statistical analysis. I need to combine across all of these csv files in a way that appends the data from each into one line per kid. I thought that 'vlookup' or 'index, match' might do it. I don't know.
View 14 Replies
View Related
Apr 16, 2007
For Each Ws In Sheets(Array("SHEET101", "SHEET102", "SHEET103", "SHEET104", "SHEET105", "SHEET106", "SHEET107", "SHEET108"))
With Ws
Finalrow = .Range("A65536").End(xlUp).Row
Set CpyRng = .Range("A2", .Cells(Finalrow, "AR"))
If Finalrow > 1 Then
CpyRng.Copy Sheets("Master").Cells(Rows.Count, "A").End(xlUp)(2)
End If
End With
Next Ws
Basically what it does is simply combine all the records in the the mentioned sheets to the master sheet.
There is a little problem. When one of the sheets are on a filtered mode, the data copied in the "Master" sheet are only visible cells.
Un-filtering before copying is an option (i.e. putting the code ".ShowAllData") IF I can put the exact filtering back after copying. Reason being that the sheets are owned by other parties and they do not want their own filtering be removed.
View 9 Replies
View Related
Apr 9, 2014
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
View 1 Replies
View Related
Mar 16, 2008
I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
View 9 Replies
View Related
Sep 10, 2009
Following up on a tread from Sailor64, I tried to use a code DonkeyOte created,
View 2 Replies
View Related
Jun 6, 2008
Can someone direct me on how to make multiple pivot tables from values that are in a column?
View 9 Replies
View Related
Aug 14, 2014
I have 2 separate pivots running off 2 separate data sources. The filters used for each or fairly similar (bar one entry).
Is there a way to have one filter that filters the information in both pivots even though they are not based on the same data source?
Also, with the filter that is slightly different; in one table, I have an option that shows (this is just an example) 'retail and end user' yet, in the other table these are two separate options.
View 4 Replies
View Related
Aug 14, 2009
I am working on an excel sheet (2007) with about 8 pivots from the same data (huge db). The 8 pivots take a different cuts of data. One filter element is same across all pivots. (For instance let us say that filter is City names: with 10 different city values in it- NY, London, Chicago etc)
What I would like to do is have a system where I just chose NY in one place and all the 8 pivots should use NY as one of the filters and refreash the data accordingly.
What I am doing now is I got to each pivot, choose NY first and then refreash all for the data.
View 14 Replies
View Related
Oct 16, 2009
I am looking for a way to combine three pivot tables in to one. Basically, one sales rep will have data for the current month, the year to date, and the total year. I have to compile this data to one sheet, for 30 sales managers! The problem with running the pivot three times (once for monthly, year to date, and yearly) is that brands that aren't sold in the month are then left off the table, which leads to a mess that it takes far too long to clean up. I hope I've made this clear, but please check the attachments for a better idea of what I'm looking to do...
View 9 Replies
View Related
Feb 10, 2012
I need to summarise a batch of data in this format....
YearPeriodAccountCustomerPart NumberSalespersonChannelValue2011Jan1SteveA1KylieHome1502011Feb2BillA2KylieExport1802011
Mar3FredA3KylieHome2002011Apr4JohnA4KylieExport1002011May5AndyA5KylieHome85
And need to put it in the following format...
Salesperson - KylieJanFebMarAprMaySteve150Bill180Fred200John100Andy85
I know I can use a series of pivot tables but would like to keep the size of the file to a minimum.
Is a DSum the way to go or can I use a Sum if and use an and function with the sum if?
formula if so to saveme a bucketload of trial and error attempts...
View 2 Replies
View Related
Jun 8, 2007
I have been sent a spreadsheet with data in it that is from a Pivot table.
The headings look like the ones in the Pivot table the only difference is
there are no drop down arrows to show/hide items
I cant click and drag fields to swap them.
So it looks like a Pivot but I cant manipulate it.
View 9 Replies
View Related
