I have a worksheet that has about a dozen sheets that are all the same, just different data. Each sheet is like a checkbook register that has date, memo, amount.... each sheet is for a different account. I have a form that I enter the info into, it puts it into the right sheet and sorts that sheet. This part all works.
But now, I want to take all the info from the different sheets and combine it into one master register sorted by date. I won't make changes to info in this master register, it would just be for info, so it doesn't have to work backwards. I need this to be automated.
Obviously, it's easy to copy all of them to different areas in one sheet, but I want to have them all in the same columns, and that is what I can't figure out. My sub registers don't have the account name listed for each entry, as it isn't necessary as the registers are labeled. But, the entries in the master register would have to have them to figure out where they came from. I can solve this by adding it to the sub accounts and hiding it or something if that is the easiest way. I also need to make sure it doesn't remove duplicates.
I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
I have an excell spreadhseet that has more than 100 sheets and I would like to combine all these sheets into one master sheet (Sheet1 = MasterSheet) within this workbook. Each sheet has different number of rows used. I just want used ranges to be copied over to a master file appending the previous copied range.
Sub MergeSheets() Dim strSheet As Object Dim LR As Long, LC As Long Sheets("Sheet1").Name = "MasterSheet" LR = Cells.Find(What:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row For Each strSheet In Sheets If strSheet.Index 1 Then
I have 6 spreadsheets all within the same folder, these are pretty much identical (rows, colums, sheets within them) apart from the names of the files.
I then have a master spreadsheet within the same folder where I want to combine all the data, from all the sheets within each book (if that makes sense!) apart from the data on the last sheet within each book as this is the reference data, onto one sheet within this master file. If possible I only want to copy rows accross which have complete data too.
So: (names not correct) From book1.xls copy all data on sheets (sheet1, sheet2 etc) except last sheet From book2.xls copy all data on sheets (sheet1, sheet2 etc) except last sheet combine onto masterfile.xls on sheet1.
I have searched on here and can only find how to do it with the first sheet in each workbook, not looping through all the sheets in each book. Please see below.
I need to combine the category sheets back into one main table, knowing that there may well be an increase in the number of categories, as well as the number of rows in each category sheet.
I have attached a sample workbook - if anyone can help me with the code so that when the macro is run, the data in sheets A, B and C are combined into Main Table.
the macro would also then update the Pivot table, that would be the icing on the cake (I have shown the pivot table configuration I need, in this case using only the data from sheet 'C', for reference)
What I would like to do is combine all data (from sheet: Page1,Page2, and Page3) into one sheet named 'Consolidated'. Unfortunately, as you will see from the attached file, my programming and understanding of VBA programming is pretty naive.
What I am after is, when I combine the data, from all sheets into the one, the data should be
1. Automatically Sorted by Patient Name
2. Group, results of the same patient from all sheets one below the other in seperate rows
3. Delete any other rows that may have a patient name and ID, but rest of the rows (New Mole,Clinically Suspicious......Benign Naevus) are blank. (This happens because of the way I have designed my userform. For first visit the details are entered in Page 1, then for second Visit Details are entered in Page2, and for third visit in Page 3. So when I enter the first visit details, the Patient Name and Patient Number are copied into Page 2 and Page 3 even though the other details remain blank. I have done it this way because, if say the Patient comes for visit the second time, the clinician may or may not be aware which visit this would be for the patient. So as soon as they enter patient number, it will give them a message that Patient already exists. So when they click Open Existing Patient Record, the form autopopulates with any notes from their previous visit into the respective page (i.e Page 1,Page 2 or Page 3).
Page 1 (Page 2 and Page 3 are exactly the same) Patient Name Patient Number New Mole Clinically suspicious Changed from mapping Photo Level of Suspicion: Score Monitor
I am trying to do is to combine multiple sheets from multiple workbooks if in the created parameters table it has a 'y' next to it. (So you can specify which workbooks to copy from and which worksheets to copy from) - please see example file to get a better understanding.
Example file: Master
What I have is a parameters table which defines which workbook/worksheet to look in (please see attachment) on the 'parameters' worksheet.
I also have a 'raw data' worksheet within the same workbook where I want the combined data to go.
File a.xls/b.xls/c.xls etc
Theses are the workbooks where all the data is held which I want to combine, each workbook is the same, just different 'data'. - they are all in the same path too.
In the first column in the parameters table I have the available workbooks: a.xls b.xls c.xls etc and next to it a 'y' or 'n' - 'y' if I want to copy data from that workbook or a 'n' if I don’t.
In the second column in the parameters table I have the available worksheets: sheet1 sheet2 sheet3 etc and next to it a 'y' or 'n' - 'y' if I want to copy data from that worksheet or a 'n' if I don’t.
In the attached example I have code which loops through each file a,b,c dependent whether it has a y/n next to it but I need some code to get it to copy data from the specified sheets in the second column (if it has a Y next to it) in the parameters table to the raw data worksheet in the master workbook with the filename of where the data came from in column A (eg A.xls).
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
How to combine two worksheets (sheet 1 and sheet2) to a sheet named “combined”? Sheet 1 and sheet 2 contain data wich is filled up by using formulas. The data range is from col A to F with headers in the first row, the length is variable.
I have a workbook with a Sheet named Main Data. The sheet named Main Data, I want to leave alone. The remaining 8 or 10 worksheets (the number of sheets can vary), I would like to take the range A2 to the last row in AH that has contents in it and paste those ranges from each worksheet into one new worksheet so that they do not overlap. I don’t know how to do that so the range I am using in the code below is A2:AH60000 consequently it will not copy the entire range from each worksheet because there are not enough rows in the destination sheet.
I have 3 sheets in my workbook, DataA, DataB, and DataC
Data A contains: ID_customer and 4 variables A-D
DataB contains ID_Customer and 4 different variable W,X,Y,Z
Data C contains ID_customer and other 4 different variables
Request: I need to analyses the relationship between the variables using a Pivot table.
My thoughts so far: I think that I need to combine all the information onto one sheet first and then use the pivot table function, but its currently unable to combine onto one sheet, due to Id_ customer numbers appearing several times in DataB and DataC (and not always the same number of times in both), I need to retain all the information from DataB and DataC
I have three spreadsheets. They all contain different data but each one has a 'Rental Equip ID' column. Is there a way to take these three spreadsheets and consolidate in to one spreadsheet with all the data on one sheet? I have included an example of each sheet. The column headers are in bold. I can send an example file examples if needed.
Rental Dscr Rental Equip ID Rental Group Rental Sub Group Rental Qty Rental Cost
I have 2 sheets with a list of account numbers and values on each (Column A = AccountNumber, Column B = Amount) I want to combine this on Sheet3 which should include all accounts on the other 2 sheets. Some AccountNumbers only exist on on one of the sheets.
I have data in two sheets. None of the sheets the rows and columns are fixed. I want to copy the data from the two sheets and paste it in the third sheet. I have attached a sample sheet for reference. I need to set it in page width so that I can print that.
I work for schools use data to guide teachers practices in the classroom. My main function is to mine down through data for kids that teachers focus on specific skills with specific children.
I start with a big conference each summer. By hand I combine, by student name, the data collected over the past school year. We then tear down to student levels setting goals based on statistical analysis. I need to combine across all of these csv files in a way that appends the data from each into one line per kid. I thought that 'vlookup' or 'index, match' might do it. I don't know.
For Each Ws In Sheets(Array("SHEET101", "SHEET102", "SHEET103", "SHEET104", "SHEET105", "SHEET106", "SHEET107", "SHEET108")) With Ws
Finalrow = .Range("A65536").End(xlUp).Row Set CpyRng = .Range("A2", .Cells(Finalrow, "AR")) If Finalrow > 1 Then CpyRng.Copy Sheets("Master").Cells(Rows.Count, "A").End(xlUp)(2) End If
End With Next Ws
Basically what it does is simply combine all the records in the the mentioned sheets to the master sheet.
There is a little problem. When one of the sheets are on a filtered mode, the data copied in the "Master" sheet are only visible cells.
Un-filtering before copying is an option (i.e. putting the code ".ShowAllData") IF I can put the exact filtering back after copying. Reason being that the sheets are owned by other parties and they do not want their own filtering be removed.
I'm trying to combine data from several worksheets (one sheet per workbook) into a single, consolidated master worksheet for reporting purposes (filters and pivot tables). We do not need to keep formulas for the master worksheet, only values and formats. Individual worksheets are used by different users to capture case data in a Human Services field. Column headings are identical, but rows contain data on individual cases. I'm trying to find a relatively easy way to combine multiple worksheets into a single master. After I establish the worksheets and technique, it will be operated by extremely basic users so I've been reluctant to use extensive macros.
Because of complex reporting needs, the exact combination of worksheets being combined for reporting may vary. For example, one time I may combine Tom, Dick and Harry, another time Tom, Dick and Bob, and yet another time Tom, Dick, Bob and Harry. Obviously, one method is to cut and paste the rows into a single worksheet. Are there more elegant solutions that could easily be handled by very basic users? Worksheets are stored in a single folder along with a separate worksheet used for validation rules (as you can guess, this would ideally be a database application but for various economic and political reasons we are using Excel). One possibility, if straightforward, is to use Access to consolidate data then export it back to Excel for analysis. I've scoured the various threads but have not found a situation mirroring mine. The number of rows for each worksheet is generally less than one hundred, but there will be a few exceeding several hundred. Total numer of rows of the resultant master worksheet will not exceed 10,000.
I have a data set that I am generating from a SQL database then putting into excel format. In this spreadsheet, I have a one to many ratio. I want to combine all notes associated with the same applicant_id into one cell. I also, only want the first Received Date and first Entry date that comes across. Is this possible to set up a formula/macro to do this manually for me? Each day I generate this data set, the number of entries can vary. I provided a smaller set, but I'm dealing with hundreds of entries.
I have a spreadsheet that has identical data in column A throughout the worksheet and want to take data in columns F and G and combine them all onto one row. An example of the data is attached.
If my input page B13 is either New Lease In-House or New Lease w/Co-Borker andmy input page B43 is - then take cell D57 in my Analysis report, mulitply it by cell B32 from Input page and divide it by 2, otherwise, take cell D57 on the analysis report, mulitply it by B42 on Input page and divide it by 4. I think I have a mess up with my brackets. This is what I have: =IF((OR('Input Page'!B13="New Lease In-House",'Input Page'!B13="New Lease w/Co-Broker"))AND('Input Page'!B43="-",'Analysis Report'!D57*'Input Page'!B32/2,'Analysis Report'!D57*'Input Page'!B32/"4")
I am trying to combine multiple workbooks together. I have some code that works great except I only want it to combine one sheet from each workbook. The workbooks are identical they just hold different data. Each book contains 8 worksheets and I want to copy only data from "Container Info"
Code: Option Explicit Sub CombineSheetsFromAllFilesInADirectory() Dim Path As String
I need to transfer a lot of data from many worksheets into one worksheet. The columns are all uniform, but the rows are not. I’d like some VBA code that would look at worksheet A(1) and copy the first entire row where column A is not blank and paste it to the first blank row in another worksheet titled “A(Combined)”. The code would then copy the second blank row in A(1) and paste it into the next blank row of “A(Combined)”. The code would continue until all rows with data in column A are transferred to “A(Combined)” and then proceed to worksheet A(2), etc. and do the same. See the attached workbook
I have a 8500 row sheet with 40 series of data given for each "data set". This data is situated in four columns and ten rows, so that rows 1-10 contain one data set, rows 11-20 contain another data set, etc...
Does anyone have a simple VBE script that can grab this data and format it so that my data sets are arranged as 850 rows and 40 columns instead of the native 8500 rows and 4 columns?
i have 2 worksheet function IF statements that of course look for certain conditions, but in some instances i need to combine the IF statements in one cell, the 2 i need to combine are below:
so what i need is for the cell to show either Sick, Swapped or the contents of Sheet2!B3 however if both C1 and G1 show Line Off then cell must be blank, which is what i achieve with the second if statement.
