I've created a macro that will compare 2 columns and move the rows around (whilst maintaining the original order) to line matches up and leave spaces for mismatches. In the file attached if you run the macro "RouteCompare" on the "Selection1" tab it works fine as there is only a small number of rows.
When i try it on "Selection2" tab with over 2K rows it bombs out. IT seems to only work for columns that are only slightly mismatched or not that long.
I'm not an expert on it, but i thought it might be excel using up all the resorces it has and grinding to a halt.
Is there any way to edit the macro to allow reset whatever is slowing it wodn after a period of time, or changing the macro to prevent it from crashing on long flows?
Here is the code I'm using:
Sub CompareMyRoute()
'Macro to compare flows
'Created by by Brendan M Murphy
Application.ScreenUpdating = False
I want to the user to press ebutton i.e Sunday and macro does the comparison.
Process
I would like macro to look at sheet "Check Hours" column "E" (cell E4) and compare it against the sheet "Check Employee Hours" column "E" (cell E7). If the hours matches i would like to say OK on sheet "Check Hours" cell E4, if it doesn't match then say CHECK.
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D. e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I want to compare two columns. I would like to see if the contents of column B appear anywhere in column A, for any amount of rows, and if it does, to place the match in col C.
So in the example below, red in B1 would be checked in A1 through A1000 or however long A is. When any row has red, place that match in that row for C.
This would be repeated until all rows in B are complete.
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR: NAMED ARGUMENT NOT FOUND
Sub HPVAL() Dim r As Range, myStr As String myStr = "HP" Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _ :=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _ False, SearchFormat:=False) If Not r Is Nothing Then r = r.Value While Not r Is Nothing Set r = Cells.FindNext(r) If Not r Is Nothing Then r = r.Value End If Wend End If End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
I have a spreadsheet that lists something like this (an easy version of it anyway!)
On tab 1 of my spreadsheet I have a table with lots of data similar to:
Column A Column B 111 12.23 111 14.32 222 48.23 222 28.34 222 10.23 222 33.40 333 23.21
On tab 2 of my spreadsheet I have unique versions of the data Column A on tab 1, for instance:
Column A 111 222 333
I would like to have a formula on tab 2 that can compare column A on tab 2 with column A on tab 1 - if it is similar I want it to total the amounts for all of the values equal.
So for instance, on tab 2 the final data should be this in my example:
Column A Column B 111 26.55 222 120.20 333 23.21
I've seen formulas that are similar.. but the condition is it can only total the rows that match. And preferably can do this from the other sheet.
Basically I am looking for Excel VBA code to compare 4 cell values from 1 sheet to 4 columns on another sheet, but the 4 values on other sheet must be in same rows. I am but a VBA beginner and I have been trying for days with no luck. I want it to go something like this:
IF A5 (on sheet1) = 40 AND B5 < (A value in column M on sheet2) AND C5 < (a value in column E on sheet 2 but in the same row as the previous) AND D5 < (a value in column F on sheet 2, also in same row as previous 2) THEN display model from column C on sheet 2 also from same column into sheet 1 G5
for example (see attachment) on sheet1 if you enter 40 into A5, 3846 into B5, 1492 into C5 and 1999 into D5 Then "MODEL19" (from sheet2) should show up in G5. I had put in a 'button' but it is not needed if there is a better/easier way to do this.
I have DAta in Col A (Med ID ) and B has number of events assocaited with the unique ID. The Unique ID is also in Col C from another data source. I wnat to return the value from Col B in in Col C that mathces the MD ID if available. There are several more col in the sheet that have other dta that is not assocaited with this. HAving an Excel formula or VB code will do some analysis. Example
Exported Med ID Data Source 1Exported Med ID Data Source 1 Number of Times Not Availle able Med ID- Matched Result From Col B to Med Id in C
I can nothing about conditional formating but i need a conditional formular that check if 2 column(or more) in an row have the value grater then 0 will be marked, lets say red.
Code: A B C D row2 0 0 0 8 row3 2 2 0 0 row4 0 2 3 3 row5 0 0 2 0 row 3 column a,b will be mark red and row 4 column b,c,d will ba mark red.
I want to compare the sales from Jan'12 - Oct'12 VS Jan'13 - Oct'13 by showing them in stacked Columns. So will have 2 stacked columns one for year 2012 and beside it for year 2013 and each one will show the months.
I have one column which contains suppose first names & i have other two column which contains first name & last name in same sheet but like they may be having in g & h column.
so i want to exact last name of user form that column(g & h) to my first name column(a).
I need to look colB and colC should be equal to colH and colI, IF both cells matched, then copy the EmpNo(ColB or colH) and Counter(colC or colI) get the difference of values in another colomn
If there is any row for Employee or Counter issing from either of tables populate with RED in either of 2 colomns,
for example:at row 17, table 1 has a missing colC, and row 17(table1) = row18(table2), it should populate the row17 for table2, as a reference.
I must match column A and column B to return the column C In colA there are all my countries In column B there are all my countries code and countries I want get the colC where all my colB match than colA.
I have a spreadsheet which will have several rows of data.
What I need is for some code to locate the duplicate values in the left most active column and then look over the rows that they are populating and delete and cells that are not present in each of the rows pertaining to the duplicate value in 1st Column and if possible remove all the blanks.
I have a sample, I will attach it and explain alittle better there.
Utilizing Excel 2009, I am trying to look for a solution that will allow me to compare a column which contains a list of filenames i.e. "832423.wav" to a directory which contains those files to see "832423.wav" is present in that directory such as "C:UsersBDocumentsAudio Files". If there is a match then the row is highlighted. Is that possible?
I have two separate workbooks, each with a great deal of information, such as name, ssn, dates, statuses, etc. I would like to compare the SSN column for both workbooks, and when it finds a match (which there would be many) to copy the MOS cell from the same row to the other workbook. Here is my breakdown with names:
Workbook 1: Macros.xls Workbook 2: MASS 162.xls The SSN column is column C in both workbooks When there is a match found between the SSN column in Macros.xls and the SSN column in MASS 162.xls, I need to copy the MOS cell (column E) from the MACROS.xls workbook to the MASS 162.xls workbook into the same row, but in column M, which is currently empty.
I have a spreadsheet with three sheets (Data, 20 and 30). On the Data sheet I have only two rows, and I do not work on this sheet. I work with the sheets 20 and 30. On the sheet 20 I need to sum up the amount of column H. But my problem is that the count of this column (the rows or cells) allways change. Sometimes there are 554 the next day 663 and so on. So I need the macro to sum up the amount of column H two cells under the last cell. I need exactly the same in the sheet 30, but the only difference is that in the sheet 30 the amounts are in the G column (not in H). Finally I need to compare the two summed up amounts (sheet 20 and 30) and they must be equal. So what I would need as macro is that when I run it, it sums up the amounts in both sheets and then in the Data sheet (in the 5th row, cell A) displays the summed up amount and (in cell B) displays OK if the two summed up amounts are equal, or just dislpays ERROR if the summed up amounts are not equal.
Attached is a sample data set. If all the positive and matching negative entries are located and removed, there are 4 remaining entries. The only pertinent columns are A through J, the columns after that are where my fiddling is occurring.
First you have to highlight all the data (including the control columns to the right). Then, my macro sorts the data by the absolute value (found in column O), allowing the formulas in N to then properly mark all negative entries with an "X and all the ones that now have a matching positive entry directly below it with an "X".
Then my macro hides all the fields with an "X" in column N. There is a macro called "CLEANSE" that does this, but only hides the rows. I keep messing up when I try to delete them entirely.
Can someone correct my macro so it will properly delete the rows with an "X" in the N column, or suggest a better macro that will scan the E column and flag matching positive/negative numbers and delete them without my control columns N and O?
See data in the attached image in Col A thru Col D. In Col E, I want to populate the max value for the same part # from Col C or Col D depending upon value in Col B.
I have included a sample of the expected results in Col E for illustration purposes.
For example Row 3,5,6 are all part # 1 with Col B ="Y", suggesting they are interchangeable parts, therefore, I would like the formula to have ability to pick 10 (since its largest between 3,10,0) from Col C.
