Check For Values In Range & Compare 2 Cells On Different Worksheets
Aug 22, 2008
In Worksheet 1, Cell B63 I would like to create a drop down menu, with two options for the user to select - 0.05 and 0.01. I would like each selection to then control the formula in the cells C63:L63, for example;
Where 0.05 selected it computes for cell C63:
=IF( COUNTA(C4:C54)=0,"",IF('WORKSHEET4'!N55>'WORKSHEET4'!L55,"YES","NO")
then cell D63
=IF(COUNTA(C4:C54)=0,"",IF('WORKSHEET4'!AC55>'WORKSHEET4'!AA55,"YES","NO")
and so on
Then if 0.01 selected it would compute for Cell C63
=IF(COUNTA(C4:C54)=0,"",IF('WORKSHEET4'!N55>'WORKSHEET4'!K55,"YES","NO")
then cell D63
=IF(COUNTA(C4:C54)=0,"",IF('WORKSHEET4'!AC55>'WORKSHEET4'!Z55,"YES","NO")
View 6 Replies
ADVERTISEMENT
Aug 17, 2013
I am new to programming in excel but am looking to make a VBA that allows me to see if a value entered exists in a second spread sheet. If it does then write a comment next to it. If not then write a different comment.
This is what my spread sheet currently looks like:
Sheet1 contains all the important information:
A
B
C
D
E
F
Load
PO
Delivery
Email
Item
ShipCon
1
3456
6543
Y
5219
5129
2
2345
5432
Y
1234
4321
Sheet2 contains the items that contain a shipping condition. There are two shipping conditions Fragile and non-Fragile. The list is of Fragile items.
Item
5219
1234
I am looking for a way to have it set up that when i enter an item number in sheet in 1 it searches in sheet 2 to see if it is fragile, if it is then returns, in sheet 1 column F next to that specific item 'Fragile'. If it doesn't find it in the list returns 'non-fragile'.
View 4 Replies
View Related
Apr 16, 2007
I want to compare cells and use a range of values to calculate totals (i.e. count if cell A1=boy and cell A2 equals either "fat" or "skinny")? Also, I tried using wildcard character "*" in the SUMPRODUCT formula, which didn't work (i.e. if cell A1="boy*" would return at TRUE if the cell contained "boy", "boys", "boy and girl", etc.). Is there a way to include wild card characters in a SUMPRODUCT formula like the ones described above?
View 9 Replies
View Related
May 29, 2014
Error Check Marco.xlsm
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
View 8 Replies
View Related
Jan 8, 2009
I am looking for a macro that will check 2 things....then do something.
The first is if a range of cell values in are blank. lets say
Sheets("Sheet1").Range("D6:G48").
Next is if a particular cell contains a given value ,
Sheets("sheet1").Range("E5") should equal "Year 1" if true.
If both these are true then I want the macro to copy a range of cells from
Sheets("Sheet2").Range("H6:H48") to Sheets("Sheet1").Range("D6:D48").
I tried to use IsEmpty but it seems to return a "False" if a range of cells
are being tested.
View 3 Replies
View Related
Dec 13, 2012
I have multiple colums that I want to compare (A=F), (B=G)........
I want to see the difference of the two as shown in Blue column (example file is attached.)
Skærmbillede 2012-12-13 kl. 18.37.15.jpg
View 2 Replies
View Related
Jun 5, 2008
I have 24 cells I want to compare to another 24 cells. I want to compare cell G5, 7, 9, 11, 12, 13, 15, 20, 22, 24, 26, 28, 30, 35, 37, 39, 41, 43, 45, 50, 52, 54, 56, 58, 60 with cell K5, 7, 9, etc. Cell G5 has to be compared to K5, G7 with K7 and so on. All the cells consist of is 1, X or 2. I want excel to count the number of matches and write it in cell G63.
But since I am a total noob when it comes to excel I have no idea how to do it.
View 9 Replies
View Related
May 14, 2014
I need to look at the values in Column B Sheet1 and compare to Values in Column K in Sheet2. If there is a match, I want to put "Cashed" in the cell adjacent to the cell in Sheet1.
View 4 Replies
View Related
Mar 27, 2009
Is there a way to compare specific data from three separate worksheets to see if they are equal?
I receive three daily reports that contain some of the same information that must match in order to correctly compile an Executive Report. Currently, I am doing this manually. Is there any way to automate the process to have a warning or something similar pop up if the numbers do not match?
View 2 Replies
View Related
Oct 17, 2012
I want to design a macro that will compare the student's completed worksheet to the model answer worksheet. This will allow the class to work at different paces depending on ability.
For each exercise, the two sheets should look identical; and so, I would like the macro to highlight any different cells in the student sheet in a colour. I would also like cells with identical values, but different formulas to be highlighted - this is why I could not use the solution posted in : "Compare two worksheets and highlight the one sheet's difference from the other one".
View 1 Replies
View Related
Sep 26, 2012
I need to compare 2 worksheets, one containing a list of IP adresses that need to be checked (interfaces), and another containing a list of IP addresses that have been checked (Scanned hosts), there are over 100000 scanned host entries.
I need to search the "Scanned hosts" worksheet to ensure that all of the IP addresses listed in the "Interfaces" worksheet have been scanned. I then need to place an entry next to the IP address on the "interfaces" worksheet to indicate the check date and the name of the person who checked it. It also needs to change the colour of the cells to indicate if it has been found or not found.
The code I have written so far (from piecing together different threads from MrExcel), at first glance, seems to work perfectly. However, if I replace an ip address in the "interfaces" worksheet, with one that I know does not exist - it still marks it as found.
Interfaces;
IP Address
System
Date Checked
Checked By
1.2.3.4
fred bloggs
1.2.3.5
fred bloggs
[Code] .....
Scanned hosts is just a list of IP addresses and text (168000 rows) in a single column. Format is xx.xx.xx.xx ^IP^^^^Jul 29 2012 08:01:29:000PM
Sub Compare()
Dim X As Long, CurrentRow As Long, FindRow As Long, WS1 As Worksheet, WS2 As Worksheet
Set WS1 = Worksheets("Interfaces")
Set WS2 = Worksheets("Scanned Hosts")
CurrentRow = 1
[Code] .....
View 4 Replies
View Related
Jun 5, 2012
I have .csv file from which the data is importing to master schedule. i have a column in .csv file which is spitted into multiple columns. and my need is i have to compare this each individual cell value with the range of header values in master schedule and if match found i have to place that cell in the row.
I am adding 2 attachments one is .csv and other is master schedule.
I couldn't able to find where i have to attach my files.
View 2 Replies
View Related
Aug 3, 2009
Using VBA, I want to import data from a text file into a worksheet, but only import a row of text if the three-letter code matches one I have in a named range. The data looks similar to this:
ALF,D,06/01/2009,0.96,0.97,0.96,0.97,1007,0
ALK,D,06/01/2009,0.34,0.36,0.34,0.345,4375,0
ALL,D,06/01/2009,3.7,3.8,3.68,3.75,12381,0
ALR,D,06/01/2009,1.155,1.18,1.155,1.17,388,0
ALS,D,06/01/2009,3.39,3.39,3.23,3.31,2642,0
ALT,D,06/01/2009,0.031,0.031,0.031,0.031,3460,0
ALY,D,06/01/2009,0.1,0.105,0.1,0.105,460,0
etc...
and the named range similar to this:
AAC
AAF
AAM
AAR
AAX
ABB
ABC
ABP
ABQ
etc....
I know how to open and import the data, it's just making the comparisons that I'm having trouble with at the moment .
View 4 Replies
View Related
Dec 5, 2007
i have a range of values and want to compare the value of a single cell to all those in the range, returning TRUE if a the value matches any value in the range.
View 5 Replies
View Related
Jul 7, 2014
Let's say I have a workbook with 7 worksheets named, for example, "Instruction", "Begin", "Worksheet 1", "Worksheet 2", "Worksheet 3", "End", and "Data". (in that order)
What I want to do is run a macro to go to whatever worksheet that is in between "Begin" and "End" and copy, for example, cells $C$1:$D$10; then paste as formula into worksheet "Data" starting from cell C1 and then down a list (i.e., copied cells from "Worksheet 1" get pasted as formula into "Data" cells C1:D10; then copied cells from "Worksheet 2" get pasted as formula into "Data" cells C11:D20, and so on and so forth).
But if I were to add more worksheets (e.g., "Recipe" and "ToDo") positioned in between "Begin" and "End" and run the macro again, it'll either 1) re-copy all the formulas from the included worksheets back into "Data" including the formulas from the newly added/placed worksheets or 2) it'll add the formulas from the newly added/placed worksheets and paste into "Data" at the end of the list.
Can create the macro to run based on the position of worksheet, and not based on the name of worksheet, since ultimately there will probably be over 10 worksheets between "Begin" and "End".
View 4 Replies
View Related
Sep 6, 2006
I have a list of dates in Column A, prices in Column B in Excel. I would like to write a VBA code that compares Price #31 in the list to the previous 30 prices to see if the price has moved more than 8%. If the price has moved more than 8%, I would like the date(s) that it moved above the 8% level written in Column C. Then, I'd like the routine to move on to Price #32 and have it look at its previous 30 prices and do the same.
View 9 Replies
View Related
Jan 20, 2012
I have this code that checks for blank cells and it works fine:
If Range("A15").Value = "" Then
I would like to change it to look in six specific cells, but the following code doesn't work:
If Range("A15:F15").Value = "" Then
View 4 Replies
View Related
Mar 7, 2012
What would be the best way to check if e.g. all the values in range A1:A4 were the same?
View 9 Replies
View Related
May 4, 2006
I am trying to figure out a formula that will allow me to compare the
contents of cells within a range and let me know if there is a value that is
not the same as the others. For example:
Columns a,b,c,d,e and f and say "Joe"- this result is acceptable
Columns a,b & c all say "joe" and d,e,&f all say "Mary"- this result is
unacceptable
I want a formula or function that will tell me this wihout me having to
visually scan the data to determine this.
View 9 Replies
View Related
Jul 10, 2013
So I have values in Column L3 to AH3 and I would like to use if condition to see which values are less than 10.
I also have other rows where this comparison needs to be done but for now I can't even get simple if condition to work.
this is what I am doing
For Each cell In Range("L3:AH3")
If cell.Value < 10 Then
ActiveCell.Font.Color = vbRed
End If
Next cell
I am not getting any error but for some reason only first cell condition is compared and not the other cells..
View 2 Replies
View Related
Sep 25, 2007
At the moment I have 2 columns, A1:A5 and B1:B5. Normally A1:A5 and B1:B5 are all 0's. Every 5 minutes numbers will show up in column B and I do a procedure outside excel(feedback of DDE's) and they all go back to 0. Now sometimes the cells in A1:A5 are not all 0 after the numbers show up in B1:B5. I can reset A1:A5 to 0 with a macro button. I already built that macro, lets call that macro 'Mike'. So now I have to press that macro button every time when B1:B5 are showing zero's after the procedure and A1:A5 are not showing 0's. Is there a way a macro can constantly check if A1:A5 is non zero and B1:B5 is zero that the macro Mike is called?
View 6 Replies
View Related
Jan 19, 2009
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies
View Related
Sep 30, 2008
I have a column that I want to check if a column contains any instances of particular values. If any are present I want it to return a 1, if not then return a zero.
View 11 Replies
View Related
Nov 27, 2012
I'll quote the example straight away.
Col A Col B
A,S,F A,S
A,R,S A,R,S,T and so on.
There is no fixed pattern for the values, but they are separated by commas only. All i need is to compare col A and col B and return me the value in Col C like this,
Col C (col C is to know the removed value from comparison)
F (for line 1)
Col D (to find the letters that are added from comparison)
T (for line 2)
View 7 Replies
View Related
Jul 29, 2014
have a look at the following code, the named ranges both hold one value.
Code:
Sub warning()
If Range("invAmt").Value Range("TotalInvoice").Value Then
InvoiceWarning.Show
End If
End Sub
I get the error METHOD 'RANGE OF OBJECT'_GLOBAL FAILED
View 2 Replies
View Related
Feb 18, 2010
In the attached excel file I have two macros that create hyperlinks:
1. BalloonToNumber - Creates hyperlinks from "Oval" shapes on sheet "Op60_1" to sheet1 (column D).
2. NumberToBalloon - Creates hyperlink scheme from sheet1 (column D) to sheet "Op60_1" "Oval" shapes.
In Q #1 my macro seems to skip some shapes on sheet "OP60_1" and I simply can not figure out why.
In Q #2 my macro creates hyperlinks to shapes that do not exist and hyperlinks to numbers that are not a "100%" match, IE: 182 and 82 would share the same hyperlink?
If you open the workbook and use the hyperlinks on sheet1 they will take you to sheet "Op60_1" and shape hyperlinks from sheet "Op60_1" take you to sheet1. On sheet "Op60_1" there are some red arrows indicating the shapes that get skipped when running the "BalloonToNumber" macro.
Shape color changes as the hyperlinks are selected from sheet1.....
View 8 Replies
View Related
Jan 3, 2013
I have two cells with values that are strings.
I would like to know of a macro that can compare each two cells(start from E2 and compare with E3)to see if the values are NOT equal.
If they are equal, do nothing and if they are NOT, highlight the value.
Example:
compare E2&E3, E4,E5,E6,E7,.... if for example E2&E3, E4,E5,E6,E7,.... each hat same string, do nothing, but if they were not the same highlight it with red.
This code checks two cells and highlights one cell when there is duplicate, I like the opposite one, but don't know what to change!
Code:
Sub CompareCells() Dim r As Range, cell As Range Range
("E2", Range("E" & Rows.Count).End(xlUp)).Name = ("MyRange") Range("MyRange").Select
' clear all colors from selection Selection.Interior.ColorIndex = xlNone
' loop through cells and compare Set r = Selection Set r = Selection.Resize(r.Rows.Count + 1)
For Each cell In r If cell.Offset(1, 0).Value cell.Value Then
cell.Offset(1, 0).Interior.ColorIndex = 3 End If Next End Sub
View 3 Replies
View Related
Sep 25, 2008
I'm curious if there's a way to use the Vlookup function to compare TWO values in TWO cells with two values in two OTHER cells (same row though) and return one value from another column. Something like
Vlookup(A2 & C2, Sheet2!A1:C400, 3, FALSE & FALSE)....? Does that make sense?
Say the values in A2 and C2 are in A24 and B24 respectively in Sheet2. Can it return C24 for me?
View 9 Replies
View Related
Mar 4, 2010
jane....kaser...highschool......A
jack....Anderson....college.....B
Jill....Lovin.....college.......C
if both jack+anderson in a same row adjacent cells
as per in my table it should return column 4 value (A)
can I use VLOOKUP?
is there another way ?
I want to search a block of two adjacent cells in a table and return its forth column value.
View 9 Replies
View Related
Nov 3, 2008
I want to divide the numbers from 2 cells, down a long column. Let's further say that in some instances there aren't any numbers in either of the cells. You get a divide by zero error.
So you have values in a1 and b1 through a10 and b10. You want to divide the value in the a column by the value in the b column and return the answer in the adjacent c column. You've copied the formula all the way down to c20.
All the cells from c11 to c20 will have divide by zero errors.
What is the syntax to check if both cells in columns a and b are greater than zero so that either an answer will be returned or just a blank cell will result, (when nothing is in one of the cells from a or b?
The following formula works for checking the status of cell A, how do I also check the value in cell B?
=(IF(A5>0,A5/B5,""))
something like?:
=(IF(A5>0 and B5>0,A5/B5,""))
View 4 Replies
View Related
