I am trying to write a macro to populate column A "main sheet"with all data from column A "info sheet", Also, in the "main sheet" Column B add a Batch number from a static cell value B5 in "Settings Sheet" every time we have data in Column A. then insert the today's date in Column C "main" every time we have data in column A.
I put a sample of the data I want to see in my "main sheet" ...
i have a simple listbox and i want to be able to assign text to it.
i thought the correct code was something like this:
listbox1.List(rw,col) = "value"
but i get a runtime 381 error. could not set the list property. invalid property array index.
i'm using row 1 is index 0 and column 1 is index 0.
how do you populate a listbox with multiple columns? .additem only populates column one for me.
15.png
Attached is the file & snap shot for the problem.
TABLE A
[table="width: 500, class: grid"]
[tr]
[td]Catagories state names devices
A4-100HP A ALT
[Code] .....
TABLE B
Catagoriesstate names devices
A4-100HP
A4-101MP
A4-102AP
[Code] ....
In above condition we want to have an automatic filling up of data in table B in column (name & device) but it should match first with state name with category codes of table B & then same with table A in order to avoid any wrong entry because in table A certain states are repeated but codes are unique so we want that filter should match two column of each table before filling data in table B.
I have single values in each cell in column A. I have 100 rows.
I want to take six rows at a time and get them to populate columns B, C, D, E, F, G.
Is there a simple formula for this?
How can I adapt the following code to only show Columns; A, B, E, F and J from Sheet(3) into a Listbox called lbx_LiveAllocations?
As it stands, this code is only adding Column A. My only alternative has been to add all columns on the worksheet to the listbox, however there's a lot of unneeded information between.
Code:
Dim LR As Long
Dim ctrl As Object
Dim i As Long
Dim dic As Object
Dim arr As Variant
Set dic = CreateObject("Scripting.Dictionary")
[Code] ........
Erase arr
I have data in three columns
A B C
4.5 9.50 4.657
4.5 11.60 4.789
4.5 12.50 4.654
4.5 13.50 3.930
4.5 15.20 3.826
I need to be able to auto-populate the cell in column G based on values in columns A & B. If I type 4.5 in E2, and 13.50 in F2, G2 should auto-populate with the value from column C
E F G
4.5 13.50
i'm having a hard time with trying to populate data from a userform to a specific column under a specific sheet. I've attached the file if you want to look at it. The file is basically a exam type with user logging and auto score computing.
The file is made of 6 sheets, 1st sheet is the log-in page where takers are required to enter their ID number and last name. 3 sheets of dummy test items, an Admin sheet that computes the score per test item and Database which I'm trying to compile all data in one column.
What I'm trying to do is that when they enter their ID and Last Name and then answer the 3 tests, they will be recorded in the database sheet in 1 column containg their ID, name and all the test results so that checking,grading and identifying who took the test would be easy.
So far I think I've done the part for the scores but I can't seem to get the userform for emp# and last name to populate on the field marked in the database.
Basically I have a form where the list can expand and contract so there will always be varying row lengths.
What I would like to see is a drop down list that shows a) the actual populated field and b) a description of the field when the drop down list is present.
I believe this can be done with a combo box however that would be a lot of work.
My question, and it's my first one here, is regarding the use of ListViews in Excel forms. I need to populate it with a range of several columns with data from a spreadsheet.
View 4 Replies View RelatedI have on sheet1 a number (72 at the moment) of Form CheckBoxes.
In simple terms: I would like a macro to look at each CheckBox and remember its state (Checked or Unchecked)
Then, go through and Check All checkboxes
Call MyMacro
Once MyMacro is complete (Filtering & Printing)
Revert the checkboxes to their original state.
The purpose of the checkboxes:
When Checked column on sheet2 is UnHidden
When UnChecked column on sheet2 is Hidden
Or, UnHide All columns on sheet2, run MyMacro, then "re-hide" the columns that were previously hidden.
I have a problem after filling in some forms on specific third party site;
After filling in all fields and giving the order to save the info, the fields which had the correct info return to blank, and nothing gets saved on the web page...
Here's how my code looks like...
Sub testing()
Dim IE As Object
Set IE = CreateObject("INTERNETEXPLORER.APPLICATION")
IE.NAVIGATE Range("a1").Value
[Code] ......
I'm trying to take list off a sheet called List ( attached pic ) and populate the table on a sheet called I-O List, there is already a formula to get the Module type and calulate the data, on the list it shows how many Inputs and Outputs it has so I need it to look like the final pic I attached, it will basically say if inputs = 16 it will start at 0 and go up. I just don't know how to populate a table, and count up from 0. and the last objective is theres a column called X if the cell is empty I don't want to calculate the line on the list, if it = X then I do.
View 9 Replies View RelatedA macro which compiles a list of entries and adds or summarises the cost.
Sheet1 contains multiple entries per group and a cost in ColumnB
Sheet2 contains only one instance of the group with a summary in ColumnB
Here's an example and I hope it helps;
Sheet1
A1 = November , B1 = 100
A2 = November , B2 = 50
A3 = December , B3 = 75
A4 = December , B4 = 10
A5 = September , B5 = 60
After running the macro with CommandButton1
Sheet2
A1 = November , B1 = 150
A2 = December , B2 = 85
A3 = September, B3 = 60
I have a spreadsheet for work rosters. Each person on the roster has a row with info on what they're doing for a given week. Split into the am and pm session of each day.
All I want to do is be able to fill the row with the same value if they're doing the same thing for the week - eg if they're on leave, I'd like to hit CTRL-L and have the row populated with 'LEAVE' in each alternate cell, rather than typing it manually. Note that it is each alternate cell, not each cell as the alternate cell has different info.
So a row would look like this:
Leave | blank |Leave | blank |Leave | blank |Leave | blank |Leave | blank |Leave | blank |Leave | blank |Leave | blank |Leave | blank |Leave | blank |
For the am and pm session of the five working days. And just to complicate matters, each 'cell' on my spreadsheet is actually 4 merged cells, and the alternate 'cell' that I want left alone is two merged cells! This is the macro generated when I do a simple record - it does what I want, but obviously jumps to the original row that I recorded it in whenever I run it - I need it to fill the row that I start it from. I recorded starting in cell I133:L134
I have a workbook with a list of names ("Roster"). The names are on sheet 1 in column B (about 200 names). I have another workbook with a participation form ("Form"). There is a field on the form for the name - sheet 1, cell A4.
populate the "Form" with the names from the "Roster". Each person should get their own form. Once the name is populated from the "Roster" it should save the "Form" as their name. Then the next person on the "Roster" should have their name populated on the "Form" in that cell and saved as their name, etc.
I'd like to create a macro such that when a person's name is typed in a cell, a separate set of cells populates with data pulled from a worksheet containing the person's data.
So, for example, I have created a scorecard template. Rather than have 50+ scorecards for each individual, I'd like to have one template upon which the individual's respective data can be pulled into the appropriate cells based on the name entered in another cell on the template (or a pop up in which the name is entered).
i have a sheet that looks like below.
I currently have a long winded formula in all the cells that just slows the whole sheet down, the populated cells range is M6:BM5010 this is the formula i have been using which works but slow !
Code:
=IFERROR(IF(AND(M$5>=$I6,M$5
I'm in a situation where I need to find a workaround for a circular argument. I've decided that having a macro to run would work rather than have a formula in the cell I want populated.
Objective:
I need a macro to either completely ignore the contents of A31 or to change A31 based on the contents of B31. Sometimes there's a B32. Sometimes there's a B667. In which case, this would need to work for all cells A31-A667.
If B31 contains CHERRY or PEACH I want A31 to be altered to say TASTY. IF B31 contains SLIME I want A31 to be altered to say NASTY. If B31 does NOT contain, CHERRY, PEACH, or SLIME I need whatever is already in A31 to remain unchanged.
This would need to continue down the rows until there are no more contents in column B.
Best guess:
I like said - I'm awful. All I could come up with is an IF statement that isn't even complete.
=IF(ISNUMBER(SEARCH("PEACH",B31)),IF(ISNUMBER(SEARCH("CHERRY",B31)),"TASTY",(some formula
that doesn't change the contents of the cell))
But that's something I would have in cell A31 rather than a macro
I am comparing each cell of column A with Column D to match it. I have almost 60,000 records in each columns. Now, I want to show the result of the mismatch in column B as "No Match".
Below is a sample of what I am trying to achieve.
A B D
adam No Match Bill
Wales Charlie
Charlie Denny
Charlie
Wales
I tried to record a mecro with formula (=IF(ISNA(MATCH(A2,$E$2:$E$65536,0)),"No Match","")). It works fine with fewer records but when i try it with my original file it fails.
I also tried to write a macro without formula but no success. It only worked well with fewer records.
What am I doing wrong? Is there anyway to solve this?
How to create a macro using the same formula (=IF(ISNA(MATCH(A2,$E$2:$E$65536,0)),"No Match","")) I used to run it manually.
i've come across something that i'd like to do with regards to populating an array/variant not using a global variable.
i currenty have this for testing purposes which works, but perhaps not the best solution?
Private vntArrayCodes() As Variant
Sub populateVntArrayCodes(ByVal intArrayCount As Integer, _
ByVal strCode As String)
Redim Preserve vntArrayCodes(intArrayCount)
vntArrayCodes(intArrayCount) = strCode
End Sub
Is there another way to do this without using a OO Classes?
I have a number of spreadsheets, all of the same format, saved into ("C:Email Attachments").
I wish to populate a master workbook, using a macro to loop through all of the workbooks in that folder, copying all of the data (Starting at B52-Q52) using Selection.End.Down, as the row count is always different and pasting it into the master workbook. Sometimes there may only be one row, so an IF statement may be required, to say if there is nothing in B53 then don't do Selection.End.Down. The overall result would be for all of the data from each spreadsheet is detailed as one big list in the master spreadsheet.
If I put this in a cell it works fine =VLOOKUP(B3,DateRange,2,0) If I tell VBA to write that formula, it works fine.
ActiveCell.FormulaR1C1 = "=VLOOKUP(RC[-44],DateRange,2,0)"
If I put this in VBA: Range("AK1").Value = Application.VLookup(Range("B3").Value, Range("DateRange"), 2, False)
I get #N/A. I'm stumped - any ideas why this would happen, or how I can work this into my code? I need the vlookup to occur 1000s of times, and don't want to have to put the formula in the spreadsheet because I just want the results, not the formula.
i have two fields with dates - one field A1 for date authorised (for a data request) and one field B1 for date actioned (data request)
i need a formula to populate in C1 the following:
if A1 is blank then C1 is 'not actioned'
if B1 is blank then C1 is 'not complete'
if both contain dates then C1 to calculate the number of working days between the dates eg. A1 10.08.09, B1 11.08.09...C1 = 1 working day
I have a userform which inputs data based upon a chosen item from a combobox. Combobox3 pulls numerical items from Rows17 and below in columnA of active worksheet. The first problem I am having is that the combobox itself is cutting numerical numbers short. Items go out to the thousandths (ex. 1.001) but in cases where there is a "0" at the end of the decimal it abbreviates it (ex.1.01) is there anyway to fix this? The second issue is I would like to populate "Textbox4" with the columnC content of the item chosen. (Ex. User choses Item 1.001 (found in row118) then Textbox4 would = the value of C18) Below is the current code utilized for this userform.
View 6 Replies View RelatedMacro to extract data from cells and populate them into a table. Go to the links below for the images. Why I can't attach images here.
HTML Code: [URL]....
Sheet 1 contains a column titled "name" and 6 columns to the right of name titled "sat", "sun", "mon"........ the col titled name is not the first col in the work sheet.
In each row I enter the guest name under the name col and I enter a room number (example: 1A, 1B, 2A, etc...) in the column to the right that coresponds with the day the guest will be staying.
Name Sat Sun Mon Tue Wed Thu Fri
Mr. Smith 1A 1A 1A 1A
Mr. Jones 3B 3B 3B
Ms. Tiller 4A 4A 4A 4A 4A 4A 4A
Sheet 2 is in the same workbook and looks something like this:
Room # Sat Sun Mon Tue Wed Thu Fri
1A
1B
2A
2B
3A
3B
I want it to look at sheet 1 and populate the date columns with the guest name from sheet 1
I tried this formula =IF('Sheet1'!G:G="1A",'Sheet1!$F:$F,"Available")
It seems to work on the first row but I have problems with any rows below that. Basically it acts like there is no data in the rows below.... I think the fact that the names on sheet 1 are not alphabetical is creating part of my problem? I tried a lookup formula but it seems like it has to be the first column in the worksheet and it has to be alphabetical to work like that.
I'm creating a spreadsheet to keep track of my costs of production in an online game. Within the game there are a range of spawned resources that appear for only a short time before being unobtainable these resources have specific types that is shared between multiple spawns of the resource but each resource spawn has a unique name.
My first worksheet lists all the resources and their various qualities and the later worksheets are meant to allow me to choose from a list resources matching the requirements of the item I'm looking to craft. The example i have shown in the second picture requires Tatooinian Fiberplast and Lokian Wild Wheat to craft so in the Chosen Resource column I would like to have a drop down list allowing me to select the named resource type i would like to use - for Tatooinian Fiberplast the only thing on the list should be Omnitwixi and for the Wild Wheat it should show Fizi and Krad
[URL]....
[URL]....
I am aware there are people with more pressing problems than computer games and as such
I am trying to automate a process where a series of numbers would get populated according the range values. Also I am trying to get the automation to pick up the next range when finished with first one and continue with the task.
Here's what I have as start info and where I want to get to.
Sheet1
A
B
1
Ranges
[Code] ......
Excel 2003
I have a spreadsheet with data populated down column B. This size will vary from day to day so is there a macro I can run that will populate Column C with a formula based on their being data in the adjacent cell.
View 2 Replies View RelatedI think there's a way to use Excel to automatically create a 5-day calendar. Maybe a macro?
The date format must be dd/mm/yyyy hh:mm and it must be in text format. If its June 9, 2012 at 6pm - the correct format is: 12/06/2012 18:00
I want to post 5 times a day: 09:05, 9:55, 10:45, 16:55 and 18:00.
Column A is where the date and time goes. Ideally, I'd enter in A1 the start date and then run a macro that would automatically populate the next 5 consecutive days with the specific times above (so 25 rows total in column A).
I have to save the file as a csv file, so the date and time format has to be in text or I'll get an upload error in Hootsuite.
