Populate Results Using Formula In Macro

Oct 29, 2009

I am comparing each cell of column A with Column D to match it. I have almost 60,000 records in each columns. Now, I want to show the result of the mismatch in column B as "No Match".

Below is a sample of what I am trying to achieve.

A B D

adam No Match Bill
Wales Charlie
Charlie Denny
Charlie
Wales

I tried to record a mecro with formula (=IF(ISNA(MATCH(A2,$E$2:$E$65536,0)),"No Match","")). It works fine with fewer records but when i try it with my original file it fails.

I also tried to write a macro without formula but no success. It only worked well with fewer records.

What am I doing wrong? Is there anyway to solve this?

How to create a macro using the same formula (=IF(ISNA(MATCH(A2,$E$2:$E$65536,0)),"No Match","")) I used to run it manually.

View 9 Replies


ADVERTISEMENT

Populate Some Results Using Countifs Formula With Multiple Criteria?

Feb 16, 2014

I am trying to populate some results using countifs formula with multiple criteria. below is the formula am using and the last two criterias are dates

=COUNTIFS('Unproccessed CIT'!$B$5:$B$411,Summary!$A$4:$A$35,'Unproccessed CIT'!$G$11:$G$417,"<>"&"closed",'Unproccessed CIT'!$A$5:$A$38,">="&$C$2,'Unproccessed CIT'!$A$5:$A$38,"<="&Summary!$E$2)

Results:
#VALUE!

View 3 Replies View Related

Macro Putting In The Formula As Text Instead Of Results

May 28, 2008

My macro contains a VLookup formula that is giving me the text of the formula instead of the results. A portion of the macro is, as follows:

Sheets("Survey Results").Select
Range("c1").Value = "Resolving Group"
Range("c2").Select
ActiveCell.FormulaR1C1 = "=VLOOKUP(RC[-1],'Survey Invitation'!C[-2]:C[-1],2,FALSE)"
Range("C2").Select
Selection.AutoFill Destination:=Range("C2:C900"), Type:=xlFillDefault
Range("C2:C900").Select
Range("C2").Select

The VLookup statement appears in place of the result when the macro is run. This is Excel 2007 and it runs to the end without error.

View 9 Replies View Related

Populate Userform With Search Results

Sep 20, 2007

I am trying to populate a UserForm with data from a spreadsheet using a search function instead of just providing a Next and Previous search function (which works). The following code is able to search for and select the correct row on which the data resides.

Private Sub cmdBlankFind_Click()

Dim FindMe As Variant, FindCell As Range, FindCell2 As Variant, Data As Variant
With Range("BLANK")
FindMe = InputBox(Prompt:="Please enter search criteria:")
Set FindCell = .Cells.Find(What:=FindMe, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
FindCell.EntireRow.Select
Data = FindCell.Value
tbxBlankAccount.Value = Data(1, 1)
End With
End Sub

View 9 Replies View Related

Populate Worksheet From Filtered Results

Feb 21, 2008

I am populating a 2nd temporary worksheet from a primary using autofilter which works just fine. I have been asked to set it up to populate the 2nd sheet using the same autofilter criteria across two or more of the primary sheet columns. I have been looking through the forums and found an article in which this process is described, #2 The power of Autofilter in VBA - Part 2, and I would like to ask if this will do the job for me.

I did attempt to create my own code, but it didn't work with a loop that I created. I do use input boxes to gather criteria from the user. I have put a copy of my code below which doesn't work, but need to know if the code in the article mentioned above will work?

Option Explicit

Private Sub UserForm_Initialize()

On Error Resume Next

' Dim rheadings, cl As Range
'
' Set rheadings = Worksheets("CONTACT").Range("A1:F1")
' For Each cl In rheadings
' Me.cbxSearchWhere.AddItem cl.Value
' Next cl

End Sub

Private Sub UserForm_QueryClose(Cancel As Integer, _ ................

View 4 Replies View Related

Macro To Push Results Of All Formula On Multiple Worksheets To Another Workbook

Mar 28, 2014

I inherited a price list workbook made up of multiple worksheets (some 30 pages). Each year the new prices (including % increase) are calculated by a formula in the row below each price (100's of rows and formulae).

Thus:
C1 might say £10
D1 says =C1+(C1*2.5%) £10.25 (it actually does some rounding too)
etc

It may seem odd having both rows but MD can see the before and after. The new price 10.25 must however be manually copied to C1 to avoid circular referencing and then D1 row hidden. Very laborious to repeat 100's of times.

Is there a way of first copying the entire workbook for the new year (easy) then by means of a macro looping through each formula cell of all sheets in workbook 1 and pushing the result to the new workbook and to the correct sheet and then to the same location but to the cell above. e.g. pushing £10.25 from D1 of sheet 1 workbook 1 to C1 of sheet 1 workbook 2 to become the new price for the coming year?

View 9 Replies View Related

Macro To Populate Cells With Formula Based On Adjacent Cell?

Mar 31, 2014

I have a spreadsheet with data populated down column B. This size will vary from day to day so is there a macro I can run that will populate Column C with a formula based on their being data in the adjacent cell.

View 2 Replies View Related

How To Get Multiple Dropdown Lists To Populate Results In Named Cell

Sep 28, 2012

I was just given a task at the office of creating a in depth excel spreadsheet. Here is what I need:

I have one drop down list that represents the state a person lives in.
I have another drop down list that represents the the type of property it is.

If you select CA in drop down 1 and Multi Family in drop down 2 you get the end result in (specific) cell.

Then if you select AZ in drop down 1 and SFR in drop down 2 you get different end result in named cell.

How can I get items within 2 different drop down list to call up the end result in a 3rd cell?

View 1 Replies View Related

Change Formula To The Results Of The Formula For Cells That Have Results

May 9, 2006

I have a range that has formulas that are based on other fcells outside the range.

What I want to do is, if the cell has a value to remove the formula and paste the results. If the filed is blank (no results from the formula) to leave the formula in place.

There could be a marco to run when this process is needed.

example attached

View 9 Replies View Related

Calculate Percentage Of Individual Months Between 2 Dates And Populate Different Cells With Results

Dec 20, 2013

I want to display the percentage of occupancy for each month for condo rentals.

I have columns with dates that represent bookings throughout the year. check in and check out dates to be more precise. (A1 and B1 for example) and I have columns with months Jan, Feb, etc. (C1, D1, etc. for example)

The problem I run in to is that I can calculate the number of days between the dates and the fraction of the year (*12 to get a monthly value, but I fail to understand how I can break that up so that I can populate each month with a correct percentage of the total term.

E.g. A1=1-jan-2014 and B1=20-jan-2014 is an easy one because it only covers 1 month:
formula: =(YEARFRAC(A1,B1,3))*12 gives me 62,47% which I could just use as is for that month.

So far so good, but when the period covers more than one month or when the months overlaps, I don't know how to break the outcome up into the appropriate months to display the correct percentage for each month in its own column.

e.g. A1=1-jan-2014 and B1=20-Mar-2014 gives me a result of 253% with the same formula.
100% for November, 100% for December and 63% for January, which I could somehow formulate to break up over different Months.

But then it gets more tricky. What if the booking starts on a day other than the 1st of the Month?

e.g. A1=5-jan-2014 and B1=20-Mar-2014
The result of the formula (243%) is correct, but isn't sufficient to put the correct percentages for each month in their respective column.

What formula(s) should I use to break down the percentages to match the correct fraction of each individual month?

I attached an example of what I have so far for your review : test.xlsx‎

View 8 Replies View Related

Results Show Results Of Formula, But Should Be Blank

Jul 27, 2006

I am trying to create formula that will show overtime worked in a given day. The code I am using is a simple one ([ cell - 8], for hours worked). The problem is when the time cells are blank/not used it shows a -8 in the cell. what I need to do to create a code that will eliminate the -8 from showing. The cell its self is taking the result from another cell with a formula and then subtracting 8 from the result of the formula in the other cell.

View 2 Replies View Related

Select Case Code For Column A Values To Populate Results In Column B In Same Row?

May 28, 2014

I'm trying to write a simple VBA code to loop through values in the range A14:A138 and based on the value (of a possible four values) in any row of that range, populate the adjacent column in the same row with a conditional result. For example if A14 = "Cat", then B14 = "I"; if instead A14 = "Dog", B14 = "II", etc. If there is no value in column A, the result should be blank (i.e. "").

I believe are in coding the destination range since I can get it to work for just one cell in B! Below is my code that is not working...

[Code].....

View 7 Replies View Related

Populate Cell Using Two Results From Same Table And Referring To Another Table?

May 23, 2013

I have a workbook with two worksheets,

sheet 1 contains student data, name dob, actual age, raw score and an empty column standardized score

sheet 2 contains a conversion table, using the actual age from sheet one you locate the age in the top row of table in sheet 2, and using the raw score from sheet 1 you locate the matching raw score from the first column of the table in sheet 2, going down and acrosss until you meet this gives you a standardised score

i want the standardized column in sheet one to fill by using a formula which looks at the table in sheet two locates the two values and returns the result.

View 5 Replies View Related

Concatenate Formula Nested Within IF Formula Is Not Producing Expected Results

Aug 24, 2014

I am trying to use a combination of Concatenate and IF formula to produce an email.

My input.

D4: First Name:
D5: Middle Name:
D6: Last Name:

D8: Organization:

Once all these are filled, I want the formula to produce a result like

FirstName.M.LastName@Organization.com

I have used the following formula.

[Code] .....

Problem is if there is a middle name the formula works fine, but in case where there is no middle name, it produces the following result.

FirstName..LastName@Organization.com

How do I remove the additional (.) in cases where there is no middle name.

Attached File : Email Generator.xlsx‎

View 3 Replies View Related

Cells Display Formula, Not The Results Of The Formula

May 29, 2009

To get cell to display results of formula I must edit (F2) and hit enter. Is there an easy way to do this in bulk rather than editing and hitting enter on hundreds of cells?

Example of formula:
=IF(COUNTBLANK(K2)=1,"",CONCATENATE("*** ",K1,": ",K2," "))

View 5 Replies View Related

Use The Results Of A Formula As Column/row Numbers In Another Formula

Oct 1, 2009

I have two cells. The first cell has the formula:

=CONCATENATE("D",TEXT(MATCH($B$6,'Zip Ranges'!$D$1:$D$157,0)+1,"0"))

which results in a col and row number (such as D65).

The second cell has the following formula:

=INDEX('Zip Ranges'!$A:$B,MATCH($B$6,'Zip Ranges'!D1:$D$157,0),2)
^^
I wish to replace the 'D1" in the Match function with the results of the first cell's formula.

I assume Indirect would work, but I don't know how to code the formula to use it.

View 4 Replies View Related

IF Formula (looks For Y And Results Y)

Jan 28, 2009

I would like a formula that looks for Y and results Y. See two examples below.

Example
Cell B2 = Y
Cell D2 = N
Cell E2 = Y
Cell F2 = Y

Example
Cell B3 = N
Cell D3 = N
Cell E3 = N
Cell F3 = N

View 4 Replies View Related

Using The Results Of One Formula In Another

Jan 9, 2007

what was the anser to a simple question earlier has now got me thinking...

I have one mega formula (see below) that based on a set of criteria returns a result from a range in an accompanying workbook:

=INDEX('input plus'!D940:D979,MATCH(1,('input plus'!$DJ$940:$DJ$979>=2)*('input plus'!$DG$940:$DG$979=1),0))

(the range 940:979 is a filled with investment funds data all within a particular sector, this formula for example will return the name of the number 1 rated fund, ie "mega star cash")

However, the above assumes that the ranges specified wont change, but they do, frequently and there are over 300 of them, so I earlier got help to create the following formula which can tell me what range a certain set of data lies within:

=CONCATENATE(ADDRESS(MATCH($A$3,'input plus'!$C$1:$C$3000,0)+0,4,4,1),":",ADDRESS(MATCH($A$3,'input plus'!$C$1:$C$3000,1)+0,4,4,1))

(so I tell this formula to look at a specified sector name 'cash funds' and by tweaking the number in bold it will return the range of data that i want to feed into the first formula, ie it will return D940:D979, DJ940:DJ979 and DG940:DG979)

If the data ranges change then these cells will dynamicaly update, either the range will shrink or grow - which is perfect - what i want to know is if i can integrate this into the first formula, so if you like it becomes completely dynamic.

View 9 Replies View Related

Formula Results

Dec 31, 2008

I have created a simple SUM formula to add cell values across six sheets in the same workbook. I see the result when I use the formula button but the result (number) does not appear in the cell. All I get is $ -.

View 9 Replies View Related

Copy Pairs From 2 Columns To Formula Reference Cells & Copy Updated Formula Results

Jun 24, 2008

I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.

View 3 Replies View Related

IF Formula Returning Two Results?

Feb 21, 2014

I am using this formula. How can I get it to pull 'Sales Materials'!$F17:$F69' and display along with 'Sales Materials'!$B$17:$B$69 when my logical statement is true.

=INDEX('Sales Materials'!$B$17:$F$69,SMALL(IF('Sales Materials'!$E$17:$E$69="YES",ROW('Sales Materials'!$B$17:$B$69)-16),ROW(A1)),1)
I've tried using * but I think something is going on with "-16" which I was told to you use to account for headers.

View 2 Replies View Related

Counting Results From A Formula

Dec 23, 2008

I have a spreadsheet which matches Reference numbers in Column A against Column B and vice versa; and assigns unique or duplicate values. I would like to be able to count the number of duplicates and uniques giving a total of how many appear in the spreadsheet. I've attached the spreadsheet to give you an idea of what its like.

View 3 Replies View Related

Conditional Formula Results

Dec 19, 2009

Hello, I cant figure out how to do this! I have a cell B2 that I enter a number in and in cell C2 I want it to add the number from B2 and add 15 to it. I can get the formula "=B2+15" and it works but I wont always have a number in B2 and I want it to say "0" and "0" would be in C2. Any ideas?

View 3 Replies View Related

Formula Results In A Defined Name

May 7, 2009

Is I have a VLOOKUP formula which results in a defined name- great! but when I reference that result in another formula I get a #REF error, if I type the defined name directly in to the formula (index btw) all works but I need the formula to recognise the referenced cell.

Example

=VLOOKUP(B8,Cable.Table,2) this results in a defined name of a table (D1A) in cell B30

The cell B30 is named "table". I then have another formula in B33 which is:

=index(B30,B47,C12) or =index(table,B47,C12) Which gives me the #REF error

If I input =index(D1A,B47,C12) the function works but it needs to be the initial reference from the result of the other formula and recognise that it is a defined name.

View 3 Replies View Related

Subtracting The Results Of A Formula

Oct 7, 2008

In A1 I have this: $9.50.
In A2 I want to display the result of multiplying A1 with 10% and subtracting the result from A1.

I've tried this in A2: =SUM(A1*10%)-SUM(A1)
But it displays a negative number: -$8.55

I need it to display: $8.55

View 3 Replies View Related

Formula Return The Same Results

Nov 11, 2009

The formula in Col G uses the value in col's B:E. I would like a formula in Col G that will use the 4-digit value in Col F ( same values as Col B:E) and return the same results.


******** ******************** ************************************************************************>Microsoft Excel - PLAY 4 EVE MOSTLY.xlsx___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutF1G1F2G2F3G3F4G4F5G5F6G6=ABCDEFG111/10/0966666666Q211/09/0977667766DD311/10/0977767776T411/11/0972467246S511/12/0977667766DD611/13/0978667866DSheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

View 9 Replies View Related

Roundup Formula Results

Oct 26, 2006

Is there any way that I can apply the roundup feature to an entire workbook without having to do each cell individually?

View 9 Replies View Related

Copy Non Zero Formula Results

Sep 4, 2007

I have 4 source workbooks and a master workbook which is linked to the source workbooks, if the source workbooks have no value in specfic cells the master workbook which is linked to it shows a 0 (not a problem). Now if I want to copy only cells which have a value other than the 0 to the end of used rows on another sheet on the Master workbook using VB I run into a problem because it sees 0 as a value and copies as well.

The issue is how do I stop the 0 showing and not being seen as a value. This 0 shows regardless of format.

View 9 Replies View Related

Formula To Populate Alphabet

Dec 4, 2013

If I have value "H" in cell C1, how would i have "I" in cell C2 and "J" in cell C3.

FYI : next 2 alphabet after "H".

View 7 Replies View Related

Template Formula For Populate

Aug 26, 2009

I have a template (attached) that needs to be populated. It's objective is to determine the QUARTER and YTD based on MONTH. For example, there's a M shown for the month Jul, Q also shown for the month Jul (since current month is Jul, current quarter month is only Jul and not Jul, Aug & Sep), and all months up to the current month shows Y for the year row. The above is currently done manually. I need a formula that will fill in the Q and Y's automatically based on the M. Is it possible?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved