Map Data From Multiple Columns
Jan 28, 2010
I have 2 Sheets, One is "Original" and Another is "For Mapping". Now i want to Map "For Mapping" Data with "Original". But the Problem is in Original the Data Reflect in Multiples Columns. http://www.mrexcel.com/forum/showthr...09#post2195209
For Better Clarification See the Attached and Links
View 5 Replies
ADVERTISEMENT
Feb 2, 2008
I am trying to write a macro that will take data from column A and use it as a column header in column C, and then take the corresponding data in column B and list it under the column header in column C. When the value in column A changes it will move on to column D and then list the corresponding data from column B underneath it in column D until all of the data in the 2 columns is spread across the worksheet. Example:..............
View 2 Replies
View Related
Feb 24, 2013
I have a large database of research data where the first column contains different categories (labelled as I, II, III, IV, V, and VI). For each row there is a data value in the second column that is numeric. What I need to do is move the data so that the data are displayed in 6 columns with the data values listed each column heading according to the category label. In the example I've shown there are 6 different categories, but the number of categories (and hence the number of columns in the final resulting sheet) will change for different data sets that I'm using. Also note the the number of cases for each different category is different (so that each column will not be even in terms of the number of rows of data under each column heading). I hope I've been able to explain what I'm looking for clearly.
I've attached a sample file showing the sample data input that I have on one sheet, and then the desired re-tablulated outcome on the second. I have done this using the auto-filter function and copy/paste, but this will take far too long for the larger datasets I'm working with.
View 2 Replies
View Related
Sep 27, 2011
I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
View 2 Replies
View Related
Mar 27, 2009
Using =A7&","&B7 to add data from two columns into one, separated by a comma. What about multiple columns, still separated by a comma? See Example in attachment.
View 2 Replies
View Related
Apr 17, 2007
about data validation drop downs.
I have 2 columns that need to be filled in once a name is selected from the data validation drop down. The data is to the right of the name in the source area.
Column A Column B Column C
1 Name 1 Skill 1 Phone #
2
3
4
This is the format, Every row in Column A has a Data Validation Drop Down, I need Column B and C filled with Data from the selected name from Column D (the data columns D-F)
Column D Column E Column F
1 Name 1 7 555-1111
2 Name 2 5 555-2222
3 Name 3 3 555-3333
4 Name 4 4 555-4444
So when I select say name 3...
Column A Column B Column C
1 Name 3 3 555-3333
2
3
4
View 3 Replies
View Related
Jan 8, 2014
My workbook contains information about investigations. Each investigation gets a number and a line in the workbook. Many infos are stored: dates, subject, ...
A dynamic table contains all those informations, which allows me to manipulate data pretty easily.
Issue: For one of the characteristics of the investigation (let's say names), several results might have to be entered. For example, one investigation can have 3 different names, the next one only 2 and another one can have 6.
This causes a problem regarding the manipulation of the data.
Right now I have 10 columns "name 1" "name 2" .... and only those who need to be filled are filled. I can't however efficiently manipulate the data. For example, George could have been entered in "name 1" for the investigation 1 and in "name 2" for another investigation. Using a pivottable, to track George I'd have to select him in all 10 columns.
It seems to me the best choice would be to somehow index the names into a single column with each name linked to its investigation number..
With the index function I have 2 issues:
- It starts by going down the 1st column, then goes to 2nd, ... where I'd want all names of 1 row then names of 2nd row.
Solved this with this formula:
I turned my "names" columns in a ranged name "Names"
but - When fields are empty I get 0s. When I try to remove them with an if statement, it'll just give me empty cells. I'd prefer to skip the empty cells.
Also, I don't know how to 'link' them to my investigation number...
I have this (dynamic) table:
investigation number name 1 name 2 name 3
001 George Paul
002 Chris George Suzy
And I want something like this:
Investigation number Names
001 George
001 Paul
002 Chris
002 George
002 Suzy
View 14 Replies
View Related
Feb 14, 2014
I have a spreadsheet with values as per below
I can rank the data based on descending values in Columns B & C using the formula in cell B2
=RANK(B2,$B$2:$B$11)+SUMPRODUCT(--($B$2:$B$11=B2),--($C$2:$C$11>C2))
What I trying to do is also rank the data based on the values in column D as an additional tie-breaker
RankScore 1Score 2Score 3
1412315
2402420
2402422
4402030
5392015
View 3 Replies
View Related
Nov 6, 2009
I'm trying to figure out a way ( excel 2000) how to sort data over a range of columns.
Attached is a sheet.
So what I am looking for is this:
Bottom 10 for target 1, target 2, target 3.
I can sort them indervidually, but is there a way to sort the all?
Or would I need a agent column for each target to sort?
Or maybe there is a way to sort the data so it would work out that if they are in the bottom 10 of lets say 2 of the targets but not all 3 they would still show in the bottom 10?
View 7 Replies
View Related
Sep 2, 2009
I have attached a spreadsheet. I have a data set with ID's in column A and data in columns to the right. If an ID has only one entry then there will only be a value in column B if an ID has 2 entries then there will be a value in Columns B and C, if they have 3.......... And so on....
In my attached file I have created a macro that filters each column and copies the values to another sheet. If an ID had 5 entries (B-F) I would want to have 5 rows for that ID. The attached example macro does what I want but the real data has over 50 columns. Is there a more efficient way of doing this?
View 4 Replies
View Related
Oct 16, 2012
show me a formula using the criterias under Column E so that cell F2 will return the result as "202 IR" and cell F3 will return the result as "654 CC"? the data is saved over three different columns
A
B
C
D
E
F
Class1
Class2
Class 3
Staff #
Staff & Class
125 CC
758CC
1214 CC
202
123 IR
213 CC
2314 IR
654
456 IR
202 IR
654 CC
View 8 Replies
View Related
Dec 6, 2007
I wish to add more criteria to the "Find Feature to Find 3 Matching Criteria in 3 Columns in Excel" (http://www.ozgrid.com/VBA/advanced-find.htm) up to 7 criteria if possible. How can I do this? I wish to display the results in a dialog box or in a different sheet. I also want to run the find feature from a different worksheet, perhaps using a button instead of having to make a selection in the table.
View 2 Replies
View Related
May 31, 2014
I have data of all my retail stores around (550)(Store Names in columns) with Product description and Sale & current Inventory, it seems very tedious job to add all the 550 stores in data area so to get sale and stock value, is there any way that I can add all stores in data area in one go.
View 3 Replies
View Related
May 22, 2014
I've a table and in the first column titled 'VALUES' (A1) I've entered values ranging from 1 to 100 (A2:A10). In the second column titled 'STATUS' (B1), 'closed' or 'NA' is entered (B2:B10). Now I need to find how many cells are there in the table with 'closed' status in the range 0-25, 26-50, 51-75 and 76-100.
VALUES STATUS
34 Closed
56 NA
44 Closed
98 Closed
18 NA
82 NA
23 Closed
40 NA
63 Closed
71 Closed
Closed Status Count
0 - 25 :
26 - 50 :
51 - 75 :
76 - 100 :
View 1 Replies
View Related
Jul 15, 2014
I have single values in each cell in column A. I have 100 rows.
I want to take six rows at a time and get them to populate columns B, C, D, E, F, G.
Is there a simple formula for this?
View 2 Replies
View Related
Apr 14, 2009
I am using Excel 2007 and I need to search for data patterns that are spread across many columns. I am not sure how to search so that criteria is met across all the columns concurrently.
For example
I am interested in data that matches the following criteria ;
Column B has the value 55
Column C has the value 70
Column D has the value 80
Rows of interest are when all the criteria in columns B,C,D are met at the same time (e.g 55 in B, 70 in C and 80 in D).
View 9 Replies
View Related
Mar 6, 2013
sample1.xlsx
Sample file attached. How do I combine the data in columns B-E into column A? Obviously in my sample file you'd use a simple cut/paste but my actual file has hundreds of columns and rows so cut/paste isn't an option. I need to move all the data into column A.
View 4 Replies
View Related
Apr 15, 2014
VBA code (or formulas) that can parse data from individual cells into multiple columns? I have attached a file noting the current inputs in columns A-F and the desired outputs in columns I-O. Additionally, I have noted the distinguishing criteria for each of the fields in cells I13-O13. Also, I noticed that each of the data points in the input cells are separated by at least two spaces. Lastly, the input data in the working sheet goes from columns A-H and the desired outputs would start from column I; with row 1 having the headers.
View 13 Replies
View Related
Feb 18, 2014
I am trying create a macro that will create a new work sheet on an existing workbook. I have minimum experience writing a macro, but I do know how to effectively record one. The issue is, I need the macro to copy multiple columns down to the end of the data and pasting it into the new workbook at the end of the data already pasted-- rows of data are frequently added to the workbook.
View 4 Replies
View Related
Jan 10, 2009
How can I copy a column (C6:C200) and paste it according to a cell value . If I have in a cell 5 it will paste column (C6:C200) five times .
View 7 Replies
View Related
Nov 18, 2008
In column A I have a list of product names..(e.g....ABCD, JKLM....)...this is the "master product list" -- 1000 rows of products.
In columns C:G, I have additional product names, each column represents products sold by state. (each column lists between 100-250 products).
I want to do a VLOOKUP and I wanted to know what products that are in
A1:A1000, that is NOT listed in C:G?
My experience with VLOOKUP is limited...but I do know that I can only look in 1 column at a time.
How can I write it to look at the ENTIRE range? I suppose I can copy all the all the products to 1 column...?
View 6 Replies
View Related
Jan 26, 2012
I have an address in one cell in excel. Street/City/State/Zip are all separated by two spaces like this: 123 Anywhere St Chicago IL 60607 United States
I want to break them out into separate columns. The "Text to Columns" won't work because there are no commas or dashes separating the data.
View 3 Replies
View Related
Nov 15, 2013
I have a list of data that is currently separated into 5 different columns with a heading. Each item in the list is given a score 1, 2, 3, 4 or N, which is then placed into the appropriate column for that score.
What I want to do is to place the data in another sheet in the same workbook in a single column list separated by the labels from the columns in the first sheet, without any blank rows.
I am sure it would be easier if I could show you the spreadsheet and the result I want to achieve but I cannot see here how I can. I tried to copy and paste, but it only pasted as text.
View 9 Replies
View Related
Jan 6, 2014
Context: My workbook contains information about investigations. Each investigation gets a number and a line in the workbook. Many infos are stored: dates, subject, ...
A dynamic table contains all those informations, which allows me to manipulate data pretty easily.
Issue: For one of the characteristics of the investigation (let's say names), several results might have to be entered. For example, one investigation can have 3 different names, the next one only 2 and another one can have 6.
This causes a problem regarding the manipulation of the data.
Right now I have 10 columns "name 1" "name 2" .... and only those who need to be filled are filled. I can't however efficiently manipulate the data. For example, George could have been entered in "name 1" for the investigation 1 and in "name 2" for another investigation. Using a pivottable, to track George I'd have to select him in all 10 columns.
I could maybe
- Write all names in 1 cell, separated by something and use somemorething to virtually split that
- Write each name in a row below, with the other characteristics copy-pasted (although then if I have 2 names and thus 2 rows, Excel will consider I have 2 different investigations).
- ???
View 2 Replies
View Related
Mar 17, 2014
I am trying to combine data from multiple columns into one column. The way my data is set up there shouldn't be any columns that have data in the same row. See below for my example.
[IMG][/IMG]
View 9 Replies
View Related
Jun 1, 2007
My pivot table wants to total 2 sets of data and put it in rows. I would like it to be in columns.
The small attached sample shows what I would like.
View 4 Replies
View Related
Sep 7, 2007
I found this treat but it didn't help me as i hoped. Move Data From One Column To Multiple Columns. I try to convert multiple datablocks to a new worksheet and make the adress blocks ready for further sorting and removing actions. The Excel I use is Dutch and i hope that i make my question clear. What I want:
copy each adressblock to another worksheet, put the initals as well as the beginning in a seperate column and delete the unnecessary comma's. Each adressblock is identified by a number in colom A. When a new number is shown, excel has to start a new line to fill. finally,if possible i like to extract the adress line into seperate colums of "street+numer", zip and place. Some adresblock have more than onder adres, if possible i want excel to ad these information in the 'extra' colums.
View 2 Replies
View Related
Jan 12, 2008
I am trying to move information that is pulled from a database to look cleaner and easier to read. All of the information exports out into column A only. The attachment is a brief example of what it looks like, and what I’m trying to get it to look like.
I want to move the data in col A to 5 columns C through G in groups of 16 rows. Once the last column is filled with a group of 16, it needs to fill below the first group of 16 in column B onward to column F. It should repeat this process until there is no more data in A. The attachment shows it much better than i can explain it.
I have some basic experience with formulas and macros, but I haven’t had any luck trying to manipulate any of them to give me the information the way I have shown. I would prefer to not have to manually type or cut and past the information in if possible.
View 6 Replies
View Related
Jan 15, 2010
I have created a spreadsheet to show some reports and I wanted to serch for some datas which overloops themeselves. If you can have a look at a test file I attached you will see the full picture. I have 2 tables, where the 2nd one is on the right side of the 1st one. 1st table:..............
View 3 Replies
View Related
Aug 13, 2012
Have a worksheet Pricelist, require to pull data from the columns to a new worksheet only if qty is more than 0, and delete empty rows afterwards. Required result is in worksheet order. Original file is about 10K rows.
Attached sample file : example.xls
View 3 Replies
View Related