Match Description Which Might Be Because Of ByVal Target As Range
Oct 22, 2008
I get and error which says Procedure declaration does not match description which might be because of ByVal Target As Range if this can not be used than what can be the exact solution for this as i have to get the Target address
Private Sub Workbook_SheetCalculate(ByVal Sh As Object, ByVal Target As Range)
Dim sht As Worksheet
Dim shtChild As Worksheet
Dim lngRow As Long
Dim intCol As Integer
Dim strValue As String
Dim Target As Range
Dim rng As Range
Application.ScreenUpdating = True
Application.StatusBar = False
Set sht = Sh............
The only problem is that once cell $A$1 changes to either Billable Impressions or CPM's to trigger the events the code keeps looping or formulating and won't stop... once I end the procedure if I hit enter in any cell it starts again and same problem persists...
way I can adjust this code to stop it from continuously calculating? ...
This piece of code copies cell info from column A into cell B1 only when cursor 'scrolls' on Col. A
How can i modify the code so that it copies into cell B1 when cursor scrolls up/down regardless of col.?
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Selection.Cells.Count = 1 Then If Target.Column = 1 And Target.Value "" Then Range("b1").Value = Target.Value End If End If End Sub
when I use worksheet_change for something so simple to do, it prevents me from deleting cells.
When I try to delete the cell values from A2 (5) and A3 (6), they won't delete unless I delete the value on A1 (True).
Private Sub Worksheet_Change(ByVal Target As Range) Application.EnableEvents = False If Range("A1").Value = "True" Then Range("A2").Value = 5 Range("A3").Value = 6 Else End If Application.EnableEvents = True Exit Sub End Sub
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
I have about 70K rows of data. This is a pull from a CRM system and one of the columns contains Free text which may or may not contain a reference ID.
So basically, I need to be able to identify which (if any) of the 60 or so Reference ID appears somewhere in the text. It may be at the beginning, somewhere in the middle or at the end.
So i created two formulas:
=ISNUMBER(SEARCH("MEBIG3",$P:$P))
I created 60 or so of these columns, all with a different Reference ID (MEBIG3 being the ID in this instance). I put the Reference ID in the Cell 1 of each of the columns. I then got a True in the cells wherever I matched the Ref ID to in the description field.
So wherever there was a True, it returned the Cell at the top of the column which has the Ref ID in it. I put a pivot table and it worked, but the problem is that Excel just can't really handle the number of calculations. The file keeps crashing and becoming corrupt (There are 70K rows, times 60 or so columns). Also I have actually run out of columns I can add in the nesting, I really need more.
Any way of doing the whole piece of analysis all in one Cell. So basically it says "If ADM1 appears anywhere in Column P return ADM1, If ADM2 appears anywhere in Column P return ADM2 and so on".
I have a table I down load from SAP with the following headers; Route, Description, DChl, YF21 (SD),YF31 (SD),YF21 (MM),YF31 (MM),YF10 (MM),YF11 (MM),YF12 (MM).
All I need to do is look up and match the Description and then insert the value (they are percentages) found under the columes YF21 onwards.
I have tried VLOOKUP until I am blue in the face and cannot get it to work.
I am trying to use a Mid function to help me in my vba problem.
In my first table I have a list of account numbers. E.g. 'ZZ500543'
In my second table I have a list of account descriptions. E.g. 'Denis Morgan ZZ500543 leak from bath'
I need to match the account number in Table1 with the correct account description in Table2. I thought a Mid function would be the best option to pick out the account number in Table2? Is this right? How would I go about using it?
i am needing to issue a dos command in excel? basically i need to send a target link to a file. i cant use a hyper link for several reasons, and this is the only way i know how to go about this.
The Bs. consulting can take any values from business process like Bp1 or Bp1 or Bp2...
for this i have written validation macro
If Target.Address = "$C$21" Or Target.Address = "$D$21" Or Target.Address = "$E$21" Or Target.Address = "$F$21" Or Target.Address = "$G$21" Or Target.Address = "$H$21" Then
do the validation;
end if;
this works fine, but i need to use or condition , is there any better way to write this, a more compact way,
I have a number of columns, each containing several thousand points. For each column, I need to know the percentage of points that are within a certain percentage (1%, 3%, and 5%) of a target number.
Why doesn't the IS operator return True when comparing Target to a range in VB when they are indeed the same? Why do we have to keep backing in via rng.Address = Target.Address or Not Intersect() Is Nothing?
Private Sub Worksheet_SelectionChange(ByVal Target As Range) **** ****'_____Works_____ ****If Target.Address = "$B$2" Then ********Application.StatusBar = "To Be" ****Else ********Application.StatusBar = "Not to be" ****End If **** ****'_____This fails_____ ****If Target Is Range("A1") Then ********Application.StatusBar = "A1 sauce anyone?" ******** ****'____But this works_____ ****ElseIf Not Intersect(Target, Range("A1")) Is Nothing Then ********Application.StatusBar = "żAlguien quiere salsa A1?" ****End If
End Sub
Again - this is just me wondering why... Am I missing something terribly obvious here?
(Edit) I am guessing it has to do with the Target argument for SelectionChange() coming in ByVal instead of ByRef, but not sure... (End Edit)
I have a spreadhseet where columns I and J (range from I6 to J300) serve as input cells, off to the right, 23 columns over in AF and AG respectively I have a hidden array formula (Index, match) calculating values based on input in either column I or J and several factors embedded in reference table in the same sheet. That works fine. I want cells in columns I and J to be interdependent, in other words, input in column I drives calculations in a hidden formula and I want the value of that calculaton to display in column J (in a adjacent cell input in I6 results in display in J6), but if I input value in J then this value will drive calculation in a hidden formula and display in I (let's say I is centimeters and J is inches). I have a code that works (I set it up as a try just for few rows) but only one code section at a time, not together. If I choose column I (#9) to go first in code, values update in J, but not the other way around, if I choose column J (#10) to go first in code, values update in I, but not the other way around. What am I doing wrong, I tried Target.address case, I tried Intersect ... is nothing then etc. They all work one at a time but not together. Here is the code as it stands now
I am trying to look through a multiple selection of cells (in Target range) and compare to see if these are Integer. I am failing to be able to cylce through the selected cells and check their value. I am sure it is VB 101 issue... but I am lost at cracking it.
I have main worksheet (target a) that I am trying to populate data from target(worksheet) b. The data I am trying to get from target b changes every month,(declining balance) based on a new month. So how can I get financial data from different cell each month from "b" into same cell in "a"? (so "A" # would be overwritten in same cell based on new # from "B". I have tried VLookup but can't be doing something correct.
I am using a piece of track changes VBA code mentioned on this site, which among other things creates a new column that reports the number of any cell that has been changed (e.g., $K$32). What I would like to do is, next to that cell, report the title of the row in which that cell appears. In other words, if someone changes cell $K$32, for easier reference I'd like others to be able to see that this cell appears in a row titled "New Sales". I'll be happy to clarify with more specifics if need be.
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
I have a column with a description that includes color in the description, I want to sort by color with breaking up the description, is there a formula that will look at the description such as "Am Cannoe black tecan" and in the cel next to it come back with "black". Then I would be able to sort by color column, otherwise I would have to text to column and break up the description, etc,,, ect....
So column a1 has the description, I want a formula that will put in column b1 "black" I have 3 colors, so I can do one at a time or add to same formula.....
I am looking for a way to use the sum.if formula, combined with the find.spec (I am not sure if this is the correct formule, at the moment I only have the Dutch Excel version, it is meant to find a word as part of a cell)
The part I am struggling with is how to find the correct cells to "sum" when the criterium is part of the cell contents. e.g. Paul is the description in am looking for in "Paul is riding his bike" If so, then add the turnover to Paul. I have made a demo to clarify what I mean.
I have created a pull down menu but cannot figure out how to add descriptions with them. The items in the pull down menu are codes instaed of making people look up their definition in a printed out table,I am hoping to figure out how to make it so that as people scroll through the pull down menu a corresponding definition for the "code" listed appears.
Any way to display the description of options (list) which in this case is a numbering code (like ECG201) in a data validation cell.
The length of the cell is not long enough for the users to know the appropriate description of the selected lists. I am now thinking there should be a way to display the description of each item so that users will know that ECG201 means "International College of Excellence", for example, instead of having to go from one worksheet (area) to another to know what an option means.
I often use pivot tables to summarize accounting data. I wish to summarize the data by account number, but also wish to display the account description next to each account number. Both the account number and account description are separate columns in my original table of data.
I've always managed to do this by the use of lookup formulas after the formation of the pivot table in a column outside the pivot table, but it would be preferable to have those descriptions as part of the table.
If I designate both the account number and account description as row labels, they land on two different lines.
