If Two Columns Match - Row And Column In Another Sheet Return A Value
Jan 11, 2013
I have a file with multiple column headers and data entries (dropdowns) into the rows. I wanted to create a secondary sheet...like a pivot table..if the vertical and the horizontal are both in the two columns selected it returns a value in the table.
I would use a pivot table, but it is a data entry sheet and the pivot table does not bring up all the horizontal and vertical values unless they have already been selected in the sheet.
View 9 Replies
ADVERTISEMENT
Jul 23, 2012
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
View 5 Replies
View Related
Dec 15, 2013
[URL]
What im trying to do is match columns A & B from AUDIT Sheet to Columns A & B in MASTER sheet. If they match then pull columns C, D & E from MASTER into AUDIT.
View 9 Replies
View Related
Mar 5, 2014
I must match column A and column B to return the column C In colA there are all my countries In column B there are all my countries code and countries I want get the colC where all my colB match than colA.
View 14 Replies
View Related
Dec 24, 2013
I have 2 sheets with thousands of clients. One has client contact information and one revenue. I was able to put the 4 columns on 1 sheet. I need a formula that will say if the value of the client name columns match, (Client name) then return the value in the third column (revenue).
One other question, b/c i copied from a pivot table, i have the client name and their email address below in a separate row. Ideally i would have the client their contact and their revenue in 3 columns next to each other. Is there an easy way to bulk move the email address from the row below the column to the column next to the client name?
View 7 Replies
View Related
Apr 8, 2008
I have to match table column name with the column name in the sheets and get the values from column 6 in sheet2 if "# of values" in sheet1 matches with "Counter" of sheets for the same column.
if ("Table Column Name sheet1"="Column Name sheet2" then
if("Counter sheet2"="# of Values sheet1" then
return "Total # of rows Sheet2" from same row.
I am using Excel 2003.
Sheet 1 ....
View 10 Replies
View Related
Jan 31, 2008
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
View 9 Replies
View Related
Oct 4, 2008
1. i am comparing text
2. i have >100 countries, and with vlookup i have to type every single one, and this is what i want to escape (mb i need to refer to an array, or string, or no idea)
3. mb a solution could be sth with index, or match, i just tried it, copying some similar formula from www, but it didn't match the countries, and return the value respective for that country.
E.g. I have China in col1 (1st file), #employees 10 in col2 (1st file), and China in Col 1 in 2nd file. So, a formula should match China & China from both files, and return 10 as number of employees.
View 2 Replies
View Related
Jul 4, 2013
I have 2 columns of usernames A and B, A has approx 700 usernames and B has about 80. In column C I have a list of names 1 for each username in column A. I want to compare the B with A and if there is a match return the value in C and place it in D.
View 3 Replies
View Related
Jun 7, 2014
I am trying to use a nested INDEX and MATCH array formula to return the value in column C when matching column A and column B, but with a few more criteria.
The range containing all the data
A
B
C
1
Cat 1
January 1, 2014
John
[Code] ..........
I am looking for the array formula to return the name of the person in column C who is in Cat 1 after the date in column B.
For example;
C7 should return "John" because B7 requests "January 15, 2014", which is after the value in B1
C8 should return "John" because B8 requests "February 15, 2014", which is after the value in B1
C9 should return "Andrew" because B9 requests "August 15, 2014", which is after the value in B4
The best try I had for the formula in C7 was
{(INDEX($A$1:$C$4,MATCH(1,($B$1:$B$4>=B7)*(A$1:$A$4=A7),0),3))}
This brings back "John" as desired in C7, but when copying down the table into C8 and C9 both C8 and C9 return Andrew.
I guess this is due to my ">=" condition in the Match formula and it is returning "Andrew" because "Andrew" is also after the date requested, but I cannot for the life of me work out how to get it to work.
View 2 Replies
View Related
Jun 5, 2009
I have a tab that has 2 columns of data and I want to be able to return a value in column A if my data matches column B. If column B has the text TRUETRUE, I want to bring back the corresponding data in Column A. How do I return all the data in Column A for all the TRUETRUEs in column B? I can only get the first instance of TRUETRUE.
View 4 Replies
View Related
Sep 23, 2009
I'm working on a project in which I have 50 states + DC listed by 2-letter abbreviation, and want to return a value in another column that will be a non-unique number (some will duplicate in the second column.)
Also need to do this same operation with first column (state) and third column, which also is comprised of non-unique numbers.
Hlookup, lookup & pivot tables seem to not be a fit for this.
View 9 Replies
View Related
Mar 12, 2008
I have two excel files.
File #1 is a varying length and has 4 columns with ID #s in Column A.
File #2 is a two column file that contains a list of ID #s in column A AND modified ID#s in column B.
I need to match the ID #s in column A from file# 1 to the list in column A of file#2 then replace ALL instances of the matching ID #s in column A of file#1, with the values found in column B of file #2.
I've tried using the substitute function but I could only replace one found ID at a time.
View 9 Replies
View Related
Apr 20, 2012
I have two columns with team abbreviations, one simply says whether they are AL or NL the other is the result of a search with multiple occurrences of the team name. I need to match the long list with the short and put the column header AL or NL in the adjacent cell.
I'm using Excel 2007
The last formula I tried was =INDEX($AY$1,MATCH(BB2,$AY$2:$AY$15,0),0)
The screen shot actually just part of the sheet copied since the screen shot look like a broken html page Ok I give up. I copy and paste a jpg it turns into code, I copy and paste the spreadsheet and formatting vanishes, I don't have a URL for the picture... I did look at FAQs and didn't find picture rules but I will look again. Meanwhile. . .
It's just six columns of data. The short list is in AY from AY2 : AY15
The long list is in BB from BB2:BB505
The column header "AL" is in AY1 and NL is in AZ1
View 2 Replies
View Related
May 13, 2014
I have a large data set which is basically just transactions on accounts by date and I want to return the transactions in date order by account number. I've attached an example where sheet 2 is the transaction listing and sheet 1 is what I'd like to return.
View 3 Replies
View Related
May 30, 2012
I am trying to return the column name to the user based on a cell value. I am using the formula =Match(C2,1:1,0). This returns a numeric value of the column based on the match. What I want to get back is "AL". Do I need to use some format calculation to achieve this?
View 5 Replies
View Related
Aug 22, 2013
I want to write a macro that match multiple column and return a value as I show in the table below
Plant
SLOC
Grade
Posting Date
1
555
abc
[Code] .....
I have to check multiple column from 2sources and get the Posting Date from Table2 to Table1. I'm quite confused about the function which I should use like match, lookup, index, etc.
View 4 Replies
View Related
Jun 17, 2009
I have used index/match before to match and extract data, but I can't seem to wrap my head around this one. It's probably best explained by looking at the attached workbook. Basically, I want formulas in 'John Doe!B' and 'Jane Doe!B' to look up the Name and Date values in column A on the 'Data' sheet, and then return the time value that is on the same row but in the 'Data!B' column.
I then want 'John Doe!C' and 'Jane Doe!C' to return the time that is two rows below the time shown in 'John Doe!B' - I've gone and manually entered and bolded the values in the workbook to show what I eventually want the formula to do. The data on the 'Data' tab will be extracted monthly into excel from tracking software my company uses, but there will always be a minimum of 3 rows of time for each date. As you can see in the example workbook, some dates will be omitted for some people, and while there will always be 3 minimum rows there will often be many more time entry rows for different dates as well. However, I'm only concerned with the 1st row and 3rd row for each date.
I was originally thinking a vlookup for 'John Doe!B' and then a hlookup for 'John Doe!C' that references the value in B might work, but I'm getting stuck on how to ensure the formula realizes the differences between the data and dates for John Doe and Jane Doe.
View 3 Replies
View Related
Sep 27, 2007
I have data in 1 column that I want to match data in the second column. If it matches a value in the second column I would like it to return the value from a row in the third column.
View 9 Replies
View Related
May 14, 2013
I have a sheet1 with following column name Ab,Bb,Cb,Db,Eb,Fb and sheet two contains Ab,Xc,Eb,Sv,Db,Fb,Gm,Cb,Hb these headings are on 7 line of both excel sheet.
Now I want to check each cell under column name Ab in Sheet1 and compare it with all the cells under column name Ab in Sheet2. If both matches then update Cb,Db,Eb,Fb of Sheet1 to the corresponding columns in sheet2 for that column name.
View 1 Replies
View Related
Sep 2, 2007
i tried using the lookup but it gave a different result. i want to search a value from sheet1 A to sheet2 A and copy the remarks from sheet2 B and paste it to sheet 1 B and if not found leave it blank.
here's the attach file i just trim it down.
View 5 Replies
View Related
Feb 14, 2014
I have a spreadsheet that contains data for a fiscal year broken out by month and quarter. I want the formula to return the data from that month and use whatever the latest quarter is. For example in the data below:
If it has only pulled data only thru Q1 it would return Q1 for Jan-Mar, however once I have Q2 data I would want the formula to return Q2 for the months of Jan-Mar.
2013Thru Q1STOLISTOLIJan-2013STOLI BASE
2013Thru Q1STOLISTOLIFeb-2013STOLI BASE
2013Thru Q1STOLISTOLIMar-2013STOLI BASE
2013Thru Q2STOLISTOLIApr-2013STOLI BASE
2013Thru Q2STOLISTOLIMay-2013STOLI BASE
2013Thru Q2STOLISTOLIJun-2013STOLI BASE
2013Thru Q3STOLISTOLIJul-2013STOLI BASE
2013Thru Q3STOLISTOLIAug-2013STOLI BASE
2013Thru Q3STOLISTOLISep-2013STOLI BASE
2013Thru Q4STOLISTOLIOct-2013STOLI BASE
2013Thru Q4STOLISTOLINov-2013STOLI BASE
2013Thru Q4STOLISTOLIDec-2013STOLI BASE
2013Thru Q4STOLISTOLIDec-2013STOLI BASE
2014Thru Q1STOLISTOLIJan-2014STOLI BASE
View 3 Replies
View Related
Sep 29, 2013
I have two files. They both have US census tract numbers in a column GEOID2010. One also has a CSA2010 text description associated with each census tract.
I need to match the cell with a census tract in the first file (example1).xlsx with the census tracts in the second file (example2.xlsx), and then return the CSA2010 text from the next column over to the first file.
I've attached two example files.
View 4 Replies
View Related
Feb 16, 2014
A B C D E F
Latest Status
Latest Date
Current Status 1
Current Date 1
Current Status 2
Current Date 2
#VALUE!
Sun,16-Feb-14,11:0 PM
Take1
Sun,16-Feb- 14,10:41PM
Take2
Sun,16-Feb- 14,11:02 PM
My formula =IF(B3="","",OFFSET(A3,MATCH(B3,B3:F3,0),0,2)) in A2 is giving me #value error.
The correct solution should be Take2, while matching the condition from B2 latest date.
Sheet Attached. File Name-Latest.xls Zippyshare.com - Latest.xls
View 5 Replies
View Related
Sep 3, 2009
I would imagine that the title of this thread made little sense, so let me try to explain:
Sheet A has columns A-C populated with data. Column D needs to search Sheet B columns A-C for a match. (ie, see if the data on sheet A is also on sheet B) if this is true, then it needs to return the value of the LAST column of the matched row in Sheet B.
So, if Sheet A R1 A-C is 1,2,3. Sheet A R1 D needs to search Sheet B for 1,2,3. and when it finds it, (for example on row 9) return the value of the last column of Sheet B row 9. The issue is, the last value could be in column R or S or AA, there is just no way of knowing.
View 9 Replies
View Related
May 28, 2008
I need to create a macro that will loop through a list of names on Sheet 1 / Column A, and if that name is listed on Sheet 2 / Column A, then it will set Sheet 1 Column B (for that one name) to "1".
The problem I've run in to is that both the lists change in length each time I have to run this (so no set range).
I've been able to get this to work with two ( nested) loops, where the first loop goes through the Sheet 1 list and the nested Loop looks for the name on Sheet2, but it is extremely slow.
Is there any simple VBA code or formula that I'm missing that could do this? I've tried to do something with the " Find" VBA command, but I can't see how it would apply to this if the list changes in size.
View 8 Replies
View Related
Apr 2, 2008
I am trying to create a macro so that when i save an entry the form sheet looks in the tavela master sheet to see if there is a match on the record number (in the A column) and saves there as an update if it matches and then if there is no match, saves it in the last empty row. this is a column to row copy so it has to be paste special to transpose. also i have a password on the sheet which i use to unprotect then reprotect. i have successfully done these two things separately but cannot combine them! i know not very much about visual basic code just what i have read here and so i am trying to make this code work.
Code:....
View 9 Replies
View Related
Jan 19, 2014
Trying to grasp the concept of using these 3 functions to search for and return values from a data sheet.
The attached spread sheet has performance data for a group of employees.
What I need to do is find a particular employee then return a value for one of the category's.
For instance, I need to find "10TE03 ANGIE HOLLIS" Parts Usage on color or cell C10 in the attached sample.
Sometimes new category's are added to column A adding to the number of rows so a simple offset is not reliable.
Once I get that working, I then need to use a named range to total and average different data points for groups of employees by teams.
Maybe Offset-Index-Match is not even the way to go here?
View 7 Replies
View Related
May 3, 2012
I have a sheet (sheet2) with up to 60000 rows of text. I want to compare column A and B on sheet2 to a range of text (B1:B50) on sheet1. If column A or B on sheet2 doesn't match any of the range of text on sheet1, I want to hide the row on sheet2.
I'm currently using VBA to import sheet2, but haven't gotten really anywhere with hiding the non matching rows.
View 6 Replies
View Related
Jan 15, 2014
The logic of the formula like this....
TAB X, Column A contains a data set, each row is a unique value. In column B of TAB X, I want to input a formula that performs the following logic: Search TAB Z, Column C, for an exact match of data contained in TAB X, Column A....and if found, look in TAB Z, Column D...if a blank cell is contained there, then in TAB X, Column A, say "Unsettled" ; however, if there does exist any character (not-blank) in TAB Z Column D, then in TAB X, COlumn A, say "Settled".....but, if the data ID listed in TAB X, column A is not found whatsoever in TAB Z, Column C, then say "NOT FOUND". So for example, within TAB X, Column A there is a unique ID in one of the rows "ABC123", then searches "ABC123" in TAB Z, Column C. If found, it looks in TAB Z, Column D and that cell is blank, so TAB X, Column B, same row that contains ABC123, the result is "Unsettled".
View 1 Replies
View Related
