Merge Data From Different Rows
Feb 7, 2007
I have a set of data which I would like to do some processing on. Basically I am concerned with two columns
Column 12 and Column 9
Column 12 is a unique account Reference and column 9 is an invoice number. My scenario is that 1 account can have multiple invoices. I want to do is serach down column 12 and find all the matches and then I want to take column 9 and combine the data within that with the previous record.
Original Data
Column 9 Column 12
2345 A0001
2312 A0001
2341 A1200
1234 A0001
4569 A1234
3456 A1234
What I want to get to:
Column 9 Column 12
2345,2312,1234 A0001
2341 A1200
4569,3456 A1234
As you can see I basically want to combine any matches with column 9 and seperate with a comma and then delete the record it has taken it from
Function repair_invoice_numbers()
Sheets(target_sheet).Select
rowcn = 2
Do
checknext:........................
View 4 Replies
ADVERTISEMENT
Dec 6, 2008
I know how to merge data in a CSV (see attachment) from 2 columns into a single cell using =A1&" | "&B2 so that A1 (Safety Products) plus B1 (Fire Protection) becomes Safety Products | Fire Protection in cell C1, but how can I do this across multiple rows so that each pair of names is combined in each row? The job I'm working with is a product CSV file that has 6370 lines so I don't want to do them one line at a time!
View 2 Replies
View Related
Mar 13, 2013
I have a dataset from Oracle that includes a study patient ID, study visit that a UC sample was collected at, date the sample was collected, and sample type. I also have a dataset from Quest, where the UC samples are sent to for testing, that contains similar information.
I need to reconcile this data, making sure that patient IDs, study visits and collection dates all match up with out using just vlookups and having to check the reverse of each (vlookup Quest into RDC, then vlookup RDC into Quest) and I've been wracking my brain trying to figure out VBA code to get my data from Oracle (orange header) to merge with Quest (blue header) and merge on Subject ID and Visit Name only.
In exhibit C, this is what ideally I would like to see as a result, data points from both are reported, but if Oracle subject id = Quest subject ID and Oracle Visit Name = Quest Visit Name, they are reported in the same row. I can then just run a simple formula to compare the collection dates and also identify discrepancies between visits (example: exhibit C, rows 10 and 11, these two UC samples look like they should reconcile because the collection date is actually the same for both, however either the study site or Quest is reporting the wrong study visit name).
View 9 Replies
View Related
Apr 7, 2014
I have a huge document that looks like this
Column A______Column B_____Column C
100/12__________B___________$
100/12______________________@
100/12______________________€
250/13______________________€
250/13______________________$
I want to keep in ColumnA all three rows of 100/12, because it has a value in Column B in one cell-which is the criteria, and remove the 250/13 because it has no value in cell B.
I was assuming that merging duplicates in column A, and than remove empty from ColumnB.
View 2 Replies
View Related
Sep 1, 2008
After sorting and filtering rows with in a set range I will have several rows that are almost duplicates. This is normal and expected due to how the workbook is used. Among these rows also will be several single rows that are not duplicates. It is important that I combine any two duplicates into one row. Example:
CREATE TABLES LIKE BELOW?
ABC D E F G H I J K
1 NameA 0XX15930777PS101300PS9
2 NameA0XX15930777PS91200PS10
3 NameX1159XXP555FBX1545PS9
4 NameB0A1234P123PS101263PS9
5 NameB1A1234P123PS90512PS10
What I need is this end result:
CREATE TABLES LIKE BELOW?
ABC D E F G H I J K
1 NameA 0XX15930777PS91200PS10PS101300PS9
2 NameX1159XXP555FBX1545PS9
3 NameB1A1234P123PS90512PS10PS101263PS9
It’s important that the data in each column stay with in that same column. Also of course it needs to be on the same row with the same person (NameA and NameB). The Columns that would determine if it’s a duplicate are D and E –. I would need this to be preformed via macro or some easy way so that others will not have a hard time. It will be on a protected Shared Workbook with Excel 2003. I've enclosed a Sample. How can I sort these or accomplish this and maintain the data where it needs to be?
View 5 Replies
View Related
Aug 20, 2014
I've tried to combine rows, but can't seem to do it. I have a spreadsheet with over 18,000 lines of data, and I really don't want to go through each line to add information from another line and then delete that line. Is there a formula that can do this? I have attached a sample of what I have and what I need.
View 8 Replies
View Related
Jun 25, 2011
I am trying to merge rows of duplicate entries, say I have the following information in a excel spreadsheet:
Column A: Name
Column B: First Line of Address
Column C: Area
Column D: County
Column E: Post Code
Column F: Tel Number
If I have the data above in my spreadsheet I want to basically search and look at columns B,C,D,E and F and then if there are any duplicates of these for that row anywhere on the sheet I want it to merge the Data for those duplicate as shown below:
A|B|C|D|E|F
Dave, Mark | Rice Rd | Liverpool | Merseyside | L45 7HT | 6381754
Tony | Hill Grove | Runcorn | Merseyside | L78 9JU | 6527897
John | Lime Ave | Runcorn | Merseyside | L34 9HF | 7248853
I have managed to find a macro that is shown below however this macro only looks at 1 column and then merges the data based on that which is not what I want
[Code].....
View 4 Replies
View Related
May 21, 2014
In Sheet1 --> Emp id, Emp Name and Emp dob having some 'p' rows
In Sheet2 --> Emp id, Emp address, Emp Designation and Emp blood group of some 'q' rows
Now, i want in Sheet3 --> Combination of both Sheet1 and Sheet2 data. Note: Emp id in Sheet1 and Sheet2 are same which indicates an unique identifier. I attached a file for your reference..
View 14 Replies
View Related
Nov 12, 2007
I have been scanning web forums for days and have not found a solution to my question. I have found similar, but unfortunately am not clever enough with Excel VBA to adapt.
I have two columns of data which I want merged into rows (a) by survey number and (b) by time slots. The data I have is similar to:
Survey No.....Results
12345...........9am-12pm
12345...........3pm-6pm
12345...........No answer
56789...........6am-9am
56789...........12pm-3pm
56789...........6pm-8pm
56789...........10pm-12am
.....................
View 12 Replies
View Related
Oct 16, 2008
I have a workbook of 96 sheets. I need to get the 4th row of each sheet,
and merge all, 96 of them, into one new sheet.
View 3 Replies
View Related
May 23, 2013
I have a spreadsheet that I need to insert a blank row every other row and then merge that blank row. I can do this with the macro below. My question is that I only want the merge on each blank row to merge A:H. Example would be insert row 9 and merge A9:H9. Insert row 11 and merge A11:H11. and so on till the end.
Code:
Sub insertrow()
Application.ScreenUpdating = False
Rows("9").Select
Do While Not IsEmpty(ActiveCell)
ActiveCell.EntireRow.Insert
ActiveCell.EntireRow.Merge
ActiveCell.Offset(2, 0).Select
Loop
Application.ScreenUpdating = True
End Sub
View 2 Replies
View Related
Aug 21, 2013
I am looking for function which allows me to merge and sum values in rows with same ID.
Example:
Sheet1
Sheet2
ID
Value
ID
Value
1.1
1
1.1
4
[Code] ........
Ordinarily I would use a Pivot Table and GetPivotData function, which can easily do this calculation, but in this case file I work with is shared, so Pivot Tables do not work. Unfortunately I am not skilled enough to type my own VBA function. New rows are added to the data source (sheet1) every day...
View 4 Replies
View Related
Jan 17, 2014
I have a CSV file that varies in length. The request is to have a macro to import the CSV file, sort it by account number (COL A) and for every row that has a like number in COL A, sum the numeric values in COL F. I have considered a pivot table however we then have to take the SUMMED records and export then in CSV.
how to SUM based on COL A? The rest of the information in each like row is duplicated.
View 1 Replies
View Related
Oct 28, 2009
i have to clean a worksheet from duplicat rows. The list looks like:
A---------B-----------C
a---------s-----------b
a---------f------------b
a---------s-----------b
a---------e-----------d
a---------d-----------v
Those rows have to be deleted where duplicates exist in column A and C. In our example the first three rows would meet the criteria and two of them have to be deleted. Content of Column B has to be merged with ";" but without duplicates. The result would then look like:
A---------B-----------C
a---------s;f----------b
a---------e-----------d
a---------d-----------v
View 2 Replies
View Related
Apr 4, 2012
I'm trying to figure out the if conditions for this relatively simple problem. Basically, this is an import from a word document where the table strays onto a new page. I want to try and repair this with a bit of VBA.
This is what it looks like:
1: cell 1 |the content should all be in this cell
2: |but the import sometimes splits it into two
3: cell 2 |
Basically if and only if cell Ax is blank (in this example A2), then I want the rows to merge each cell and repair the table.
View 1 Replies
View Related
Jun 2, 2012
In a big data sometimes I have identical rows (maybe the 'Quantity' column has different value). I would like to merge them into one and add the quantities together. I have to use B and C (I need both) to find out if these rows are identical.
For example:
A1=date B1=111222 C1=ABCD ... and G1=quantity (1)
A2=date B2=111222 C2=ABC ... and G2=quantity (1)
A3=date B3=111222 C3=ABCD ... and G3=quantity (2)[code]......
View 3 Replies
View Related
Aug 27, 2009
I am a CAD person, trying to edit a large spreadsheet for reading into CAD.
I need to merge 2 worksheets into a 3rd.
Then search and delete the blank rows. (There is only 3 columns in the document, but can be as many as 5,000 rows or more)
The Cad program does not like blank rows, so I have to delete them if users insert them, and there may be several in a row. (Users need only edit one of the worksheet, No. 2)
The 3rd worksheet must then be saved to a Tab-Delimited txt file in the same location on the network as the xls document.
I am able to select the worksheets and copy to a 3rd, but how to go to the end of the data, before merging the other data from the 1st worksheet into the third.
View 9 Replies
View Related
Aug 8, 2014
I have a sheet that has a section in range (c18:k25) (it is merged and text is wrapped) If that amount of space is not adequate to fit all their information I would like to add a macro that when activated it asks how many rows would you like to add and then based on that number whether it be 1-10 it would insert a new row to that merged range so they can continue adding more information . I have the sheet locked down to prevent changes so it would have to be unlocked and then re-locked within the macro.
View 1 Replies
View Related
Jul 28, 2008
to prepare an excel spreadsheet for a mailmerge but as all of the info for 1 recipient needs to be in columns instead of rows. I need to convert 2 columns' data into columns but only when there are duplicate invoices, see below;
View 9 Replies
View Related
Jun 14, 2009
I have a large list of text in one column which i need to combine between blank rows into one cell or a new column, the number of rows to be combined varies.
for example
aa
bb
ww
xx
zz
rr
gg
hh
ii
jj
would become
aa bb
ww xx zz
rr
gg hh ii jj
I have over 30000 lines so doing it by hand is not an option.
View 9 Replies
View Related
Jul 14, 2009
I have around 150 excel files with sample data as follows in "sheet 1" of each workbook,
Excel doc 1:
ABC1
Column 1Column 221Data 1Data 132Data 2
Excel doc 2:
ABC1
Column 1Column 223Data 3Data 334Data 4
I want the rows with data in column 'B' and empty column 'C' from every sheet to be copied into 1 sheet.
Output to be as,
Final Excel doc:
ABC1
Column 1Column 222Data 2
34Data 4
I have a VBA code sample to select the required files in a folder and run the macro over it. The VBA is as follows,
Sub Importxlsrows()
'Import all selected rows to one sheet
Dim xlsDoc As Object
Dim xlsFileName As Variant
Dim RowNo As Integer 'row number in excel
Dim iRow As Long 'row index in Excel
'probably here we need to insert the required logic
End With
Set xlsDoc = Nothing
End If
Next i
ShowStatusFree
MsgBox "Required rows of selected files are imported into the sheet", vbInformation, "Done!"
End Sub
View 9 Replies
View Related
Aug 20, 2014
So Im working on a project where I want to take the reviews from our employees and put them on letters and email them out. Every employee has 1-4 reviews and multiple questions answered for each- normal mail merge would send someone 4 letters with the review info & I'd love to have it all pulled into one. I made a fake one & attached below. I've tried a couple of formulas I've seen online but none of them have worked.
fake feedback1.xlsx
View 5 Replies
View Related
May 11, 2014
We are doing a graduation project on an international airport, consist of scheduling flights on check-in counters automatically.
long story short, we ended up with an excel sheet like this: Screen_Shot_2014-05-11_at_4.png
Were y-axis are the check-in counters and x-axis is the timeline horizon (cell per 5-minutes)
I will do a VLOOKUP, to change each flight number to it's ID from an other sheet.
But the problem is that i want to AUTO-MERGE all cells with same value, because they represent one flight! and if i shortened the column width i can't see anything.
I want it to be like this: (i've done this manually, and it's VERY time consuming with errors because we have to do it for all days.)
Screen_Shot_2014-05-11_at_46FDQO.png
I googled for days, i only found Visual basic commands i guess? that only merge same rows. and they were poorly made. beside that it didn't work properly. Method to do it automatically?
EXCEL 2013
View 3 Replies
View Related
May 11, 2014
We are doing a graduation project on an international airport, consist of scheduling flights on check-in counters automatically.
Excel sheet like this:
Were y-axis are the check-in counters and x-axis is the timeline horizon (cell per 5-minutes)
I will do a VLOOKUP, to change each flight number to it's ID from an other sheet.
But the problem is that i want to AUTO-MERGE all cells with same value, because they represent one flight! and if i shortened the column width i can't see anything.
I want it to be like this: (i've done this manually, and it's VERY time consuming with errors because we have to do it for all days.) Any method to do it automatically?
EXCEL 2013
View 3 Replies
View Related
Aug 2, 2013
I have three source workbooks that needed to be consolidated into a master workbook pasting the data with values & formatting.
The Master workbook also contains 6 additional worksheets that link to the data pulled in from the source files.
My question is how do I write the code so the source files populate the master in a specific order.
For example, the 3 source files are named "Central" "NED" and "WEST" and I need them to populate the master workbook in that order.
This is the code I am using to consolidate the data:
Option Explicit
Sub ConsolidateSheetsFromWorkbooks()
'Author: Jennifer Starr
'Date: 7/12/2013
'Summary: Open all files in a folder and merge data (stacked) on all
[Code] .....
View 1 Replies
View Related
Mar 29, 2014
I got the following data and I like the results to be:
Data
Company | Country
ABC | USA
ABC | London
BBB | USA
CCC | USA
Results:
Company | Country
ABC | USA, London
BBB | USA
CCC | USA
Is it possible to this under Pivot? as I need to consolidate lots of data..
View 2 Replies
View Related
Jan 23, 2013
I have a large spreadsheet where some data are similar. for Example
Robert $1000
Louis $600
Glen $350
Doreen $2300
Robert $500
Louis $600
Glen $750
Doreen $300
Robert $3000
I want to merge all Robert together, all Louis together and show as one Robert $4500. How can I do that ? Should I use a Look up.
View 11 Replies
View Related
Jun 7, 2013
I have 2 data sets which i want to add together. Here is an example.
Data sheet 1
A B C
SAC
L
1
INPUT
L
4
BLIN
L
12
[Code] .......
What i want to do without inserting every line manually.
A B C
SAC
L
1
FIX
L
2
[Code] ........
View 2 Replies
View Related
Dec 4, 2013
I have an empoyees first name in A1 (Joe) and Surname in B1 (Bloggs), however, I want "Bloggs, Joe" in C1?
View 2 Replies
View Related
Oct 23, 2007
I'm quite proficient in Excel but am struggling here, would really appreciate any help
I basically have 80 tabs with IP addresses in Column A and then information in Columns B, C and D related to this.
What I want to do is bring all this together in one sheet
Possible?
View 7 Replies
View Related
