I have a excel file with two tabs, one with raw data, with data ordered by geographic region.
I have another blank tab, where I've created a dropdown list of the geographic regions.
How do I move all the data from worksheet to the other based on that geographic region?
Error in the code, where I'm trying to copy the data (based on criteria) from one worksheet to another, then delete the data from the first worksheet. In the code (I have complied from this message board) I get an 1004 error "Application-defined or Object-defined error".
Code:
Option Explicit
Sub CopyALColKYes()
Dim NR As Long, c As Range, firstaddress As String
Application.ScreenUpdating = False
NR = Sheets("Completed-Expired").Cells(Rows.Count, 13).End(xlUp).Row + 1
[Code] .........
I have a formula sheet that uses an IF statement to determine if one columns data is bigger than another. Out of the 300 or so rows there are approx 20 that come back as yes (this is in column A) and the rest are blank
What I would like to do, is for the 20 or so rows, I would like to pull out (copy) columns B, J and L and put them into worksheet 2. Preferably without any gaps in the rows or columns.
I hope this is enough information, I am using MS excel version 2010 although I think the people who will ultimately be using it are on an earlier version.
I often find that it would be useful to have a data type for geographic coordinates (i.e. latitudes and longitudes) that would e.g. permit/facilitate formatting negative values as South and West, direct subtraction of one latitude/longitude from another, conversion of degrees-minutes-seconds to decimal degrees, properly formatted axis labels when using Excel to draw maps (at the moment, I am editing the axis labels in the PostScript file by hand, when I don't use chart labeller to paste axis labels in) and so on.
(Time formats could be used, if only they could be prevented from converting hours over 24 to days, which I have not found out how to do.)
Therefore: does anyone know of any Add-In out there somewhere that could supply the lack of a geographic coordinate data type?
I currently have a consolidated worksheet (thanks Bill!) called " Dashboard" that contains closed items that are marked by a validated column that can only contain "Closed, Open, or In-Progress." Is there a way to move the rows with a value of "Closed" to another worksheet called "Completed"? Also when this move is done, that row is no longer necessary in Dashboard and should be removed. So I'm guessing its a lot like a cut and paste and then a delete row/shift cells up?
here are some additional information:
The worksheet has a locked header that is 6 rows deep (the values for the "Status" column begins on row 7 and on.)
The "status" column is at column 11.
I have a excel file to keep track of tasks or actions that need to be performed. What I am looking for, is an automated utility or code that will allow excel to automatically move entire rows (so an entire task) of completed tasks to another sheet called, "Completed Actions". In Actions sheet I have a column for " status" and here you have to select from a drop down menu, either "On-going", "Urgent" or "Done". What I would like, is that once you have selected "Done", the entire row or entry, will be automatically moved to the "Completed Actions" sheet.
View 7 Replies View RelatedI have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
How can I move data from one worksheet and place in another worksheet in the appropriate column? I exported data from Access to Excel in order but I need to group the data in excel.
View 3 Replies View RelatedI would like to move the current row of data to another sheet when I change a value in the row from an x to an s. I think I could use an If statement, but if you can move data from one worksheet to another, I don't know the syntax to use.
View 9 Replies View RelatedI need a code that will allow me to move data from a worksheet to a worksheet from which I came from. e.g. worksheet "Sheet 6" opens "Sheet 10", then after filling data in "Sheet 10" I need to move this data back to "Sheet 6" in the cells in range "F12 to F56". Please note that the data in "Sheet 10" is in the same range as in "Sheet 6"
View 1 Replies View RelatedI'm looking to automatically move data from my working worksheet, when a particular column states "Won" or "Lost". I'm hoping the entire row of data can be cut, and added to the appropriate sheet, determined by "Won" or "Lost".
View 5 Replies View RelatedI need to do is move a list of data in an excel worksheet to Notepad. The data is 16 numbers long, but the Notepad needs to be left justified to 19 characters. I can't figure out a way to move spaces over to notepad.
View 6 Replies View RelatedIs it possible to have a macro compare two wokrsheets and move the totals from one sheet to the other worksheet.
Here are the worksheets: ....
I am trying to find a macro that will filter on Column F (non-blanks - just cells with dates) cut just the filtered data (A:G inclusive)without the Header Rows and then paste/move this data to the first empty row on another sheet called "Complete"
So that I get the cells in columns A:G with dates in moved to the "Complete" tab and they are no longer in the sheet "Deliverables"
situation: 3 rows of data, row 1 has HDR in several cells (always in A1).
task
1. search row one for next example of cell containing HDR, excluding cell A1.
2. IF found, create a new worksheet and move all data below and/or to the right of that cell to the new sheet.
3. Repeat steps two and three until the search does not turn up another HDR except in A1.
I have 2 columns of longitude and latitude coordinates. I want to count coordinates within certain ranges. A bit like using the Frequency function but for 2 sets of values and 2 bins arrays. This would mean I could create a table with latitute bins as the row headers and longitude bins as the column headings. Would anyone know how to do this?
View 9 Replies View RelatedI have a excel file to keep track of sales pipeline. What I am looking for, is an automated utility or code that will allow excel to automatically move entire rows once a task is completed and can be moved to another sheet. In Prospects sheet I have a column for " Stage" and here you have to select from a drop down menu, either "Prospect", "Contacted" "quoted" "WON" "LOST" What I would like, is that once you have selected one of the sales stage, the entire row or entry, will be automatically moved to the right tab from the "prospects" to a new sheet according to each stage.
SalesPipeline.xlsx
Here is the situation:
There is a spreadsheet that I use that has multiple plans in one column for various members. You can see the plan for Robert James and Amanda James is plan 5. If all this information was in column A how would you move the plan type say column C for each member?
For example
Column A
Customer Name
Robert James
Amanda James
Plan 5
Nikki Martinez
James Gross
Plan 6
I would like to know if the following problem can be solved using only Excel without any operator intervention. Can a formula be created? If yes I would appreciate it very much
Problem:
If B5 = X
Move B6 thru K6 to B5 thru K5
And
Move B7 thru K7 to B6 thru K6
And than
Blank out B7 thru K7
I'm trying to figure out how to reorganize data based on boolean values in two different columns. My goal is to write something in VBA that will look to see if the boolean in the first cloumn is true then procede to check if the boolean in the next column, same row is true. If that is the case, it will take several values from the row and move them to another worksheet. If the boolean in the first column is true, but the second column is not, it will look down the rows of the second column until it finds true then move several values from rows it has passed through. Here is an example of the sample data I will be dealing with.
Date Time Duration Boolean1 Boolean2
6/22/200715:0032TRUETRUE
6/22/200718:0058TRUEFALSE
6/22/200719:0060FALSEFALSE
6/22/200720:0060FALSEFALSE
6/22/200721:0060FALSEFALSE
6/22/200722:0060FALSEFALSE
6/22/200723:001 FALSETRUE
Based on the example data my goal is to move the data in a new worksheet that would look something like this
Date Start End Duration
6/22/2007 15:28 16:00 32
6/22/2007 18:02 23:01 299
I have had several intro programming classes, but not with visual basic. I've noted the problem lines with comments below. The problems are probably very easy syntax error.
Sub list()
Dim counter As Integer
Dim counter2 As Integer
Dim id As Double
Dim id2 As Double
Dim palletnum As Integer
ActiveSheet. Name = "Pallet Detail"
Sheets.Add
ActiveSheet.Name = "Pallet Summary"
Sheets("Pallet Detail").Select
I am working on two spreadsheets, one we shall call Target Sheet and the other Reference Sheet.
On the target sheet, I have a set of 200 geographic coordinates longitude and latitude (in decimal degrees). Each pair of coordinates coresponds to a geographic site.
On the reference sheet, I have a set of 900 geographic coordinates longitude and latitude (in decimal degrees). Each pair of coordinates coresponds to a geographic site. Note that of the 900, 200 are the same from target sheet, other 700 are different sites.
Using the spherical law of cosines, I can calculate the distance between a set of coordinates on target sheet agianst a set of coordinates on reference sheet. This allows me to see the distance from one geographic site, to the other. This was easy. The formula I use is as follows: ....
I have a sheet which I need to arrange and it looks like -
Column A
Column B
Column C
Column D
[Code]...
the values in Column B, C , D , E & F need to be in new columns based on what we have in Column A associated with "1"
Output should be -
Column A
Column B
Column C
[Code]....
so whatever is in Column A associated with "0" should remain in place whereas whatever is in Colimn A associated with "1" should get added to the new columns. 0 and 1 resembles the 1 Records which are used as a split to normalize the data.
I have a 'Summary' worksheet which is shown as:
August
September
October
Example 1
1
4
5
The table, which works correctly, looks in another worksheet 'Report' for 'Example 1' within the date range of August. This uses COUNTIFS.
Ideally, what I'm wanting to do is have an auto-filter on each of the cells - 'Example 1', 'Example 2', so if a user wants to see what rows on the 'Report' sheet, falls into this criteria, it auto filters the other worksheet, and takes them too it.
The action would be - Click on the cell of 'Example 1', the macro auto-filters based on the cells value in column F of the 'Report' sheet, and takes the user there. The macro would have to take into account the date filter as well, which uses cells A1,B1 for August, and C1,D1, for September.
I have two sheets in one workbook; one has a list of names in column A (136 of them) and another is a master list with all the names of people who work for the company (over 2000). Sheet 1 and Sheet 2 respectively. I need to populate columns B-E in Sheet 1 with the data in columns B-E in Sheet 2, but only for the names that match in column A. I've tried applying filters but can't get to the data I need for some reason. The names are formatted the same way in both sheets (Last, First). In Sheet 2 the names are links but in Sheet 1 they aren't; not sure if that's important.
View 7 Replies View RelatedI am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
I have Sheet1 "MASTER" and Sheet2 "Area1" and Sheet3 "Area2" etc...
My MASTER sheet has a list of employee names and the areas they work in. I have employees working in different areas, and I want to pull a list of employee names from the MASTER working in Area1 (sorted on the MASTER sheet) to column A on Sheet2, then pull a list of employee names working in Area2 to column A on Sheet3, etc...
I want it to do this in such a way that if I add an employee to Area1 on the MASTER data, it will populate that employee in the Area1 Sheet.
So basically, I'm looking at one column on the MASTER sheet to see if the area matches. Then looking at another column on the MASTER sheet to get the name. Then taking that name and transposing it to a new sheet corresponding to the area they work in.
I've attached a sample sheet. I want Column A in the Area1 sheet to reflect all names that show up on the Area1 LIST on the MASTER sheet, and nothing else. I'm using VLOOKUP to pull the rest of the data from the MASTER table.
There is a new sample workbook up now. Couldn't update it sooner due to site outage. I've removed irrelevant data to improve readability and focus on what I'm trying to achieve. Again, the main issue is scraping column E from the Master, and populating a list of all employees who match certain values in Column E on the Master in Column A of the other tabs.
I am trying to get the address of Current Region through a Function call. The function only returns the address of the cell, not current region. Isn't it possible to use Current Region within a function? It works for a Subroutine. I have attached the examples in a file.
View 5 Replies View RelatedHow can I use this code but tell it to select all but the right-most column? I have this piece of code...
View 4 Replies View RelatedI am trying to figure out the best way to plot this data -- For each region, I want to plot December 2006 snowfall against December 2007 snowfall. So starting on row 12 to row 41 (in the attached file). First challenge: the dates are not aligned because it is using the retail calendar where 12/3/2006 is compared against 12/2/2007. How can I plot the snow depth for the Northeast for example? I can't just use a dual axis chart because there are also dual dates...
View 3 Replies View Related