Move Rows To Worksheets Based On Cell Text In Row

Mar 16, 2008

I download our monthly bank transactions (.csv). I have a workbook with sheets named for each creditor or expense.

I would like move each row, based on the specific word in a cell row, to the specific worksheet.

Here are some typical transactions in the Description column:

Some are specific:
1/7/2008ACH WEB-SINGLE 9085863 VONAGE AMERICA VONAGE
“Moved to the Vonage worksheet.”

Others are not so obvious:
2/1/2008CHECK CARD PURCHASE XXXXX4636 BOSTON MARKET #0450 GREENSBURG PA
“Moved to the Eat Out worksheet.”

2/21/2008CHECK CARD PURCHASE XXXXX4636 ASPCAPS XXXXX0028 MD
“Moved to the ASPCAPS worksheet.”

2/19/2007POS PURCHASE POS54309901 0014264 PITTSBURGH ST GREENSBURG PA
“Moved to the Grocery worksheet.”

I was able to find the following while during a Search:

Move Cells Containing Specific Word In Column To New Sheet

The question was answered, in addition to Dave Hawley, by Bill Rockenbach who inserted the following code - “Sub FindWord()”

Option Explicit
Sub FindWord()
Dim Sentences
Dim Word As String
Dim i As Long
Dim iWordPos As Integer
Dim lRow As Long
Dim sWord As String

If this is a possibility for what I'm looking for, I’m not sure how to implement it into my situation.

View 6 Replies


ADVERTISEMENT

Move Rows Based On Specific Text Being In Column

Mar 21, 2008

I am trying to have rows moved from (Schedule) to (Complete) in the attached workbook. The criteria to have the row moved would be the user-selected "Status" list changing to "COMPLETE" in Column G.

I would like to have the row cut and deleted from Sheet4 (Schedule) once "COMPLETE" is selected from the list in Column G with rows below moving up. The row would then be inserted into Sheet2 (Complete) at the top of the list (Row 7) and rows would move down below the new entry. I would also like to have the formatting remain uniform (every other row fill)

View 2 Replies View Related

Move Rows To Another Worksheet Based On A Cell Value In That Row

Jul 16, 2005

I currently have a consolidated worksheet (thanks Bill!) called " Dashboard" that contains closed items that are marked by a validated column that can only contain "Closed, Open, or In-Progress." Is there a way to move the rows with a value of "Closed" to another worksheet called "Completed"? Also when this move is done, that row is no longer necessary in Dashboard and should be removed. So I'm guessing its a lot like a cut and paste and then a delete row/shift cells up?

here are some additional information:

The worksheet has a locked header that is 6 rows deep (the values for the "Status" column begins on row 7 and on.)

The "status" column is at column 11.

View 8 Replies View Related

Move Rows To Another Worksheet Based On A Cell Value In That Row ...

Jan 15, 2008

I have a excel file to keep track of tasks or actions that need to be performed. What I am looking for, is an automated utility or code that will allow excel to automatically move entire rows (so an entire task) of completed tasks to another sheet called, "Completed Actions". In Actions sheet I have a column for " status" and here you have to select from a drop down menu, either "On-going", "Urgent" or "Done". What I would like, is that once you have selected "Done", the entire row or entry, will be automatically moved to the "Completed Actions" sheet.

View 7 Replies View Related

VBA - Move Entire Rows From One Sheet To Another Based On Cell Value?

Jun 3, 2012

I have two sheets:

1. Not yet printed
2. Printed

My data is in sheet 1 (Not yet printed). I would like to move automatically entiry rows (sometimes more then one) to sheet 2 (Printed) based on one cell's value. Here is a screenshot:

For example when I enter into Sheet 2 '264450' then row 2 would have been moved to Sheet 2.

And also with multiple rows, if I enter '264461' then row 4 and row 6 would have been moved to sheet 2 as well. I wouldn't like to enter a value more than once.

View 1 Replies View Related

Move Rows In Table Based On Cell Values

May 1, 2008

I need to CUT & PASTE records according a cell value. For example:
Columns A2 to AC1000 there are some values. In each rows of AD2:AD1000 the values repeats with the result something like "YES", "NO", "N.A.", "LESS CHANCE". So, I need to shift (to another sheet) only the entire rows with values of "NO" and "N.A."

View 6 Replies View Related

Move Text Into Columns From Rows

Aug 22, 2009

I have a set of data that has a store number in cell A1, the store name in B1 and then the store address in C1, C2, and C3. This pattern repeats for all ~300 stores. I am trying to get all of the store data on one row per store.

I have a set of data that looks like this:

View 6 Replies View Related

Move Rows Based On A Criteria

Jul 21, 2007

Cell a1:a3000 contains a lot of trackingnumbers. Cell b1:b3000 I have a "IF" formulas in place to write "ok" if part of the data in "column A" matches my criteria. What i need is a macro that will cut all the rows showing "OK" in column B from "sheet1" to the next availible row in "sheet2"

I have tried converting copy macros to Cut macros, but thye have not worked. I am rather hopeless for the coding part and mostly make macros based on the record feature. Also looked at the ones that have been showed here, but my skills do not make me able to change them to fit my excel sheet. About 8000 rows with data is added into this sheet everyday and the criteria is not always present. That means on some days there will be no "OK" showing in column B

View 3 Replies View Related

Move Data In Columns If Rows Contains Particular Text

Feb 24, 2014

If the row contains a text like ABC in multiple columns in a sheet it has to copy the whole column from that sheet and paste special into another sheet.

View 2 Replies View Related

Move Rows From One Sheet To Another Based On The Year

Mar 15, 2009

I want to do is copy all rows from the worksheet DATA based on column G (Date) and copy it to a new sheet based on the date (all 2003 on the 2003 sheet and all 2004 on 2004 sheet.....).

I have already created the new sheets including headers minus data. I would like to have all the data moved except the last to Columns AW & AX. I have two hidden sheets in this workbook. Would it be possible to have it auto-populate future entries from the "DATA" worksheet to autofill onto the new sheets?

Just noticed that I titled the Thread with Move but what I am asking for is copy. I cannot change the Thread title.

View 6 Replies View Related

Move Rows In A Table Based Upon Certain Criteria

Jan 3, 2014

I have four sheets with the same size tables and just need rows to be able to be moved back and forth based on input from a certain cell and just added to the next available blank cell in the desired table. Adding the code from the webpage below works very well but only puts into the worksheet and not into the actual table. Is there any way making it actually input the row into the table itself?

Creating Macro that automatically moves row to another spreadsheet?

Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = 5 Then
If UCase(Target.Value) = "COMPLETE" Then
Target.EntireRow.Copy Destination:=Sheets("Archive"). _
Range("A" & Rows.Count).End(xlUp).Offset(1)
Target.EntireRow.Delete
End If
End If
End Sub

View 1 Replies View Related

Move Rows Based On Content Of 2 Cells

Oct 24, 2006

At the moment I have 1 spreadsheet with 12 worksheets that I have to enter data into. I would rather enter all the data onto one sheet then have a macro move the data into the correct worksheet based on the contents of columns A and B.

The raw data will be entered into the worksheet "Data". Once complete, I would like the user to press a button and the macro to then identify from column A the suppliers name. If it is not one of the recognised suppliers, then it would move the row into the worksheet "one off". If it does recognise the supplier then it checks column B to see which of the two supplier's two worksheets it needs to copy it to, with the data entered into the correct column based on the column title (ie only the white columns).

View 9 Replies View Related

Copy All Rows Based On Text In Cell

Nov 21, 2011

the following situation:

I have several worksheets in a file with worksheet 1 containing all the raw data I am working with.

In worksheet 3, I have hundreds of rows containing different texts in column C. Let's call this texttolook4.

I want search for texttolook4 (all rows) in worksheet 1 (column D) and copy the worksheet 1 row if found in a new worksheet.

View 1 Replies View Related

Macro That Will Highlight Cell And Four Rows To Right Based On Text In Cell

Aug 6, 2014

I have a spreadsheet where if Cell A2 says "Deposit", Rows A2-E2 would be formatted with a Blue background.

I've tried conditional formatting, but I can't built it into a Macro (I can't make it run), and it only highlights the cell that has that value. I also tried having the spreadsheet filter down to only the values I want highlighted, then highlighting all cells and un-filtering the column- this didn't work either.

It would basically say :

If (any cell in Row A) has text = "Deposit" (it needs to be exact, it can't be "containing"), set cell with the word "Deposit" and 4 cells to the right as Blue (I'm not picky about the color).

View 10 Replies View Related

Moving Rows To Another Worksheet Based On Text In A Cell

Nov 30, 2012

I would like to make a macro that will move rows from one worksheet to another worksheet.

I have an excel spreadsheet with multiple columns and rows, within one of the columns there is some text that refers to SOS or County, I need to move everything that has SOS to another worksheet title UCC SOS and everything that has county to be moved to another worksheet title UCC County. Here is a sampling of the worksheet

Account
Primary Borrower
Corp
Status

[Code]....

View 7 Replies View Related

Move Data From Multiple Worksheets To Single Sheet Without Manually Entering Each Cell Id

Feb 5, 2014

I have a number of worksheets and need to move data from the same cells of each work sheet to a summary worksheet. I manually entered the cell id's for the first sheet.

Example =Jan!M6, =Jan!N7, =Jan!O9 etc.

I know I should be able to automatically enter these same cells for the remainder of my worksheets with out manually going in and typing each one (there are a lot of entries.) I just can not remember how to do it. The next sheet is named "Feb" and "Mar" etc.

View 5 Replies View Related

Hide Worksheets And Rows Based On Empty Cells?

Jul 2, 2014

My company has a canned template for some of the work we do and to avoid wasting too much paper I wanted to insert some extra code into an already programmed macro button (which sets the page breaks) to hide forms (both as individual worksheets and rows within separate worksheets) if the field that ought to auto-fill them is left empty.

View 3 Replies View Related

Move Rows Into Worksheet Depending On Cell Value

Jul 7, 2009

One of the worksheets contains all of the data and the rest are empty. I need to do is move entire rows of from the main worksheet in to worksheets named the same as the value in column C of the row.

for example one row may have TEST in column C so i want to move it to the worksheet called TEST. The next row might have TESTING in column C so that would go to the worksheet called TESTING. and so on.

View 3 Replies View Related

Move Cell Contents & Delete Rows

May 23, 2006

I have a spreadsheet with a serial number is row 1 in column A with the rest of Row 1 empty. Column A is empty in Row 2, but has the data associated with the row above in columns B through L of Row 2. Then comes 2 blank rows and the pattern repeats with a new serial number in column A of row 5 and so on. I would like to move the serial number down one row, delete the now empty first row, delete the following 2 empty rows, and then loop to do the same thing again for all 9000 rows of the spreadsheet.

View 2 Replies View Related

Move Cell One Column Right Offset Rows

Nov 4, 2006

I have sheet1 with four columns. Team, Issue, Discussion and Recommendation. Discussion and Recommendation headings were placed in column B along with the data in the file I was sent. I need to get it back into table format to eventually load into Access. What I'm trying to do is to loop reading down column B. When I find the word “Discussion” (exact format) I need to drop down one row below the word, cut whatever is in the row, move one column to the right, Column C, and two rows up and paste. For example, cell B3 has “Discussion”. I need to drop to B4, cut whatever is in the cell and move to C2 and paste. I also need the same to happen for Recommendation. Find the word, drop down one row, cut whatever is in the cell, move two columns to the right and up four rows. I would like to delete the rows I moved data from, but will do that by hand if it’s too hard to do in a macro.

An example of my data:
TeamText
Design4. Reuse existing code to extent possible.
DesignDiscussion
DesignNo discussion
DesignRecommendation
DesignEstablish a baseline and work to the plan.
Design5. Delete old code
DesignDiscussion
DesignNo discussion
DesignRecommendation
DesignNo recommendation
Design6. Plan to work without full details.
DesignDiscussion
DesignIncremental design
DesignRecommendation
DesignWork on smaller details first

Sub Discussion()..................

View 3 Replies View Related

Move Adjacent Cell Into Rows, Same Column

Aug 9, 2007

I need to create a repeatable macro/module to help me prepare a spreadsheet for import into Microsoft Access. In each row of the spreadsheet is various information including Order Number, Model, and Serial Number. The problem lies in the Serial Number column, which often contains several Serial Numbers delimited by commas. In order to serve my needs in Access, each Serial Number instance needs to become a new row ( record) wherein all of the information (except for the Serial Number) is the same. It is crucially important that all of the serial numbers are in the same column. (I tried using text to columns as a starting-off point, but seemed to dead end).

Example:

Order#1; Model1; Serial1, Serial2, Serial3

Needs to become:

Order#1; Model1; Serial1
Order#1; Model1; Serial2
Order#1; Model1; Serial3

View 9 Replies View Related

Break Up And Move Text To Next Cell

Apr 25, 2009

There are basically four fields of text (date, trans. #, merchant, $ amount) all in one cell that I would like to have in 4 separate columns without having to cut-paste, cut-paste, cut-paste. Is it possible for me to break this information up quickly into 4 separtate columns? I have about 400 lines of text like this and would like to find a faster way to do it.

View 10 Replies View Related

Copy Rows From Multiple Worksheets To New Condition Based On Criteria

Nov 20, 2012

I have multiple sheets with the same format.(all columns have same format) in column "A" i have a value lets say "B1-1".

What I need to do is to copy from all sheets the rows containing in column "A" the same criteria("B1-1") to a new sheet and skip the rows that have a blank cell in Column "A".

View 5 Replies View Related

Excel 2003 :: Hiding Rows Based On Conditions On Two Worksheets?

Jan 4, 2013

I have two worksheets (Sheet1 and Sheet2). Based on meeting a condition on Sheet1 AND Sheet2, I'd like to use macros to automatically hide rows on Sheet2.

Sheet1 sample:
Type
Selection

[Code]...

The conditions are: If on Sheet1, a Type has the Selection "Include", then any rows on Sheet2 which have that same Type are shown (ie. not hidden).

If on Sheet1, a Type has the Selection "Exclude",then any rows on Sheet2 which have that same Type are hidden.

So in the example tables above, if ONLY Type A = Include, then on Sheet2, the rows for Sample URL1 and Sample URL2 are shown, and the others are hidden.

Also in the example tables above, if Type A = Include AND Type B = Include (and all other Types are Exclude), then on Sheet2, the rows for Sample URL1, Sample URL2 AND Sample URL3 are shown, and the others are hidden.

I'm fine with the concept of If... And... on the same worksheet, it's trying to get it to look at two separate worksheets I'm struggling with!!

View 3 Replies View Related

Excel 2003 :: VBA / Hiding Rows Based On Three Conditions On Two Different Worksheets

Jan 14, 2013

I have a workbook with two worksheets, Sheet1 and Sheet 2. Based on the data entered in the 2nd column on Sheet1, I'd like a macro which hides rows for Events which do not meet the criteria entered on Sheet1.

So in the example below, on Sheet2, I only want to see rows where the Country=Scotland, AND the Location=Glasgow, AND the Start Date is greater than (or equal) the Start Date on Sheet1.

Sample of Sheet1
Country
Scotland

Location
Glasgow

Start Date (dd/mm/yyyy)
30/04/2013

[code]....

So in this scenario, only the FIRST row meets the 3 criteria (Scotland, Glasgow, date after 30th April), thus all the other rows should be hidden.

View 6 Replies View Related

Summing Values From Multiple Worksheets Based On Rows And Columns

May 9, 2008

I have Master sheet where I collect info from sub sheets. All sheets are similarly formatted, ie. product numbers on column A and headers on row 2. I need to sum values from all sheets based product number and header. Master sheet includes all product numbers and some extra headers, sub sheets include only needed numbers. Headers on sub sheets are identical.

Currently I have this thing solved with following formula:

N48=sumproduct(sumif(indirect("'"&$B$378:$B$385&"'!A:A");A48;indirect("'"&$B$378:$B$385&"'!L:L")))

Where B378:B385 includes sheet names.

But problem with this is that column is hard coded, so I have to know that that value I am looking for is in column L. That wouldn't be show stopping problem on its own, but I have columns all the way to DR and copying formulas for each column takes a lot of time when I have to manually update each column. Just copying cell holds that L:L and doesn't change it.

So, in addition of getting values for specific product number I need to get values from specific column based on column header.

View 9 Replies View Related

Move Data From One Cell In One Row Into Several Rows And Copy Rest Of Row

Mar 2, 2013

I publish a green building mag, and we run an enquiry system for readers on our website. This is the link: [URL] .......

The idea is that readers tell us some info about themselves, including what types of products/services they'd like to receive information about, and we pass their details on to advertisers offering those products/services.

When someone fills out a form, we get data in Excel on their enquiry. It's all in one row - name, contact details, and then the products/services they've enquired about are included in one cell, separated by commas.

So for instance, suppose a listing currently came in as follows (column headings in brackets:

(name) Joe Soap / (job title) Architect / (organisation) Joe Soap Architecture / (address) 123 Soap St, Soapville / (enquiries) insulation, solar panels, windows

Essentially I want it to run like this:

(name) Joe Soap / (job title) Architect / (organisation) Joe Soap Architecture / (address) 123 Soap St, Soapville / (enquiries) insulation
(name) Joe Soap / (job title) Architect / (organisation) Joe Soap Architecture / (address) 123 Soap St, Soapville / (enquiries) solar panels
(name) Joe Soap / (job title) Architect / (organisation) Joe Soap Architecture / (address) 123 Soap St, Soapville / (enquiries) windows

View 14 Replies View Related

Move Row Into New Sheet Based On Cell Value?

Dec 5, 2012

I need write a VBA code that will move an entire row into a new sheet if the value of the last cell says "YES" If the value is blank then Id like it to stay in the current sheet. I would also like it if the cell wont allow any other value other than Yes to be typed.

I found this code here:

Copy, Move and Delete Row, based on Cell Value

THE VERY FIRST CODE REPLIED IN THAT THREAD.

I just cannot seem to get it to work. Simply copying and pasting that into the module doesn't work. I am not very good at VBA and just started taking a course on VBA. Id like to jump into this problem asap as I need it for work.

Basically:

Columns A:E will have values. In Column E I would like to type in Yes if completed. I would like the Macro to run through all of Column E and if the cell value is "YES" then I want it to cut the entire row and paste into a new sheet. In the new sheet I would like it to be pasted into the next available row.

Also can I create this with a ActiveX control button? I would like to have a button that I can click at the end of my work which will run the Macro in sheet 1.

View 6 Replies View Related

Move Mid Text In Cell To Front. Reverse

Mar 5, 2008

I am working with a column which always displays the cell contents with oldest notes by date first, then the newest note last. I would like to have the contents from a cell reversed with the newest user input by date on top which will simply when reading. Here is an example of a cell. The string always starts with (MM/DD/YYYY TT:TT:TT AM, then user name).

12/20/2007 8:27:56 AM MBARNEY Approval not required for this change request. 01/25/2008 10:27:32 AM KVELDANDA Change to Category, Type, Item, Region, Site, Department fields triggered an evaluation of whether or not the Change requires approval. Approval is not required.

View 9 Replies View Related

Move Rows To Another Sheet When Value Is Chosen From Dropdown Menu In Cell

Nov 25, 2013

i am making a simple complaint tracking system and there is a column where there are two choices Resolved and Unresolved if you choose resolved it copies the row to the resolved sheet and if it's unresolved it copies the row to the unresolved sheet. i attached a template to give you an idea, i want the first complaint to be copied to the resolved sheet and second one to the unresloved sheet, i don't want the status column which contains the choices to be copied to the other sheets, also the unresolved sheet doesn't have a 'date closed' column because the complaint is not yet resolved so i dont want it to be copied there, i want it only in the resolved sheet.

[URL]

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved