Move Data In Columns If Rows Contains Particular Text
Feb 24, 2014If the row contains a text like ABC in multiple columns in a sheet it has to copy the whole column from that sheet and paste special into another sheet.
View 2 Replies
ADVERTISEMENT
Move Text Into Columns From Rows
Aug 22, 2009I have a set of data that has a store number in cell A1, the store name in B1 and then the store address in C1, C2, and C3. This pattern repeats for all ~300 stores. I am trying to get all of the store data on one row per store.
I have a set of data that looks like this:
Move Rows Of Data From Several Columns But Not All Columns?
Dec 18, 2013Column A is numbered 1 -100 successively Column B thru D contains data that goes with the assigned number in column A. I need to be able to move rows of data in column B through D to a different set of rows all at the same time (not one cell at a time) without disturbing the set numbers in column A. And with that, have all the other rows of data automatically adjust accordingly(not to be deleted or replaced).
View 1 Replies View RelatedHow To Transpose / Move Data From Columns To Rows
May 18, 2013So, I have a column with data on rows as follows below. I need to arrange the data below in such a way that I have on first column the company name, second column the contact person and so on depending on what data is found (tel, e-mail, website).
The data is on rows and I have separated each company/group of data with a row between them. There are in total aprox 200 companies/groups of data that I need to arrange as explained above.
I have tried with transpose but I have to manually do it 200 times. I have tried with an indirect formula but the companies/groups of data do no have same amount of info/rows e.g. some lack the phone number or other data.
if there is a method to save the time and not arrange them manually.
Actinote
Contact: Toine Kets
Managing Director
Str. Tache Ionescu 3, Et. 5, Apt. 10
[Code]....
Excel 2010 :: Macro - Move Data From Rows To Columns
Dec 13, 2011I am using Excel 2010 and need a macro that can convert data from rows to columns. I have read several posts about this subject but have no experience with macros and don't know how to change the macros to fit my scenario.
Here is what I currently have:
Account...Vehicle1...Loc1...Vehicle2...Loc2...Vehicle3...Loc3...Vehicle4...Loc4
11111......2008........FL
11111......2000........FL
12121......1999........GA
33222......2000........AL
33222......2011........AL
33222......2001........MS
Here is what I need it to look like:
Account...Vehicle1...Loc1...Vehicle2...Loc2...Vehicle3...Loc3...Vehicle4...Loc4
11111......2008.......FL.......2000........FL
12121......1999.......GA
33222......2000.......AL.......2011........AL......2001.......MS
There are up to 4 vehicles/locations per account number, and I need 1 account number per row (the dots above are for spacing only and not part of the actual data).
I could do this manually but because I have so many rows of data it could take days or weeks. Is there a macro out there that can do this??
Move Rows Into Columns
Aug 11, 2013I need a way to move every 7 rows into columns.
So rows 1-7 become columns 1-7, rows 8-14 into columns 1-7 etc.
Move Every Two Rows To Columns
Sep 22, 2012I have data that I want to move to columns:
-----A
1 Apples
2 Bananas
3 Oranges
4 Watermelon
5 Grapes
6 Kiwi
It should move every two rows to columns, like so:
-----A------------B
1 Apples-------Bananas
2 Oranges -----Watermelon
3 Grapes-------Kiwi
4
Move & Transpose Columns To Rows
Aug 16, 2008We have to copy from lot of Java webpages
1. Data of single column 3 rows of data to First blank cell in 'C' column (say C6)
2. Then Transpose it across to the same row into 3 columns (from same C6 to d6 & e6)
Here I tried some VBA but needs how to put it across....
VBA Macro To Loop Text To Columns Through All Rows Of Data?
Apr 17, 2014I am trying to get a macro to run in excel that takes a simple text to columns command in one line of data and runs the command on a loop through however many rows of data there happen to be.
I've attached two screenshots - one with what I've got now (Before.jpg) and what I'd like to have after the macro runs (After.jpg). The code below is what I used to get the first text to column breakout, which I can hopefully run on a loop to breakout anything in the DEPT column that contains a "/". It can ignore the rows that only have one department to begin with.
Selection.TextToColumns Destination:=Range("K2"), DataType:=xlDelimited, _
TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=False, Tab:=False, _
Semicolon:=False, Comma:=False, Space:=False, Other:=True, OtherChar _
:="/", FieldInfo:=Array(Array(1, 1), Array(2, 1)), TrailingMinusNumbers:=True
Eventually I'll want to create another macro that transposes the breakout text back into the DEPT column and populates it with the corresponding data, but I figure I'll take things one step at a time.
Attached Images
Before.jpg‎
ter.jpg‎
Count The # Of Rows In A Spreadsheet In Which There Is Non-blank Text Data In 2 Separate Columns
Dec 5, 2008I am trying to count the # of rows in a spreadsheet in which there is non-blank text data in 2 separate columns. For instance, if the spreadsheet looked like the one below (dashes just for formatting purposes):
NAMES-------THIS-------------THAT
Mary-------some text--------some more text
John-------<blanks>---------just text here
Sue--------just some here-----<blanks>
Dave-------something--------something else
Adam------<blanks>-----------<blanks>
The total # of rows with something in both the "THIS" and "THAT" columns above would therefore be 2.
Move Data From 2 Columns Into Multiple Columns At Each Change
Feb 2, 2008I am trying to write a macro that will take data from column A and use it as a column header in column C, and then take the corresponding data in column B and list it under the column header in column C. When the value in column A changes it will move on to column D and then list the corresponding data from column B underneath it in column D until all of the data in the 2 columns is spread across the worksheet. Example:..............
View 2 Replies View RelatedMove Rows To Worksheets Based On Cell Text In Row
Mar 16, 2008I download our monthly bank transactions (.csv). I have a workbook with sheets named for each creditor or expense.
I would like move each row, based on the specific word in a cell row, to the specific worksheet.
Here are some typical transactions in the Description column:
Some are specific:
1/7/2008ACH WEB-SINGLE 9085863 VONAGE AMERICA VONAGE
“Moved to the Vonage worksheet.”
Others are not so obvious:
2/1/2008CHECK CARD PURCHASE XXXXX4636 BOSTON MARKET #0450 GREENSBURG PA
“Moved to the Eat Out worksheet.”
2/21/2008CHECK CARD PURCHASE XXXXX4636 ASPCAPS XXXXX0028 MD
“Moved to the ASPCAPS worksheet.”
2/19/2007POS PURCHASE POS54309901 0014264 PITTSBURGH ST GREENSBURG PA
“Moved to the Grocery worksheet.”
I was able to find the following while during a Search:
Move Cells Containing Specific Word In Column To New Sheet
The question was answered, in addition to Dave Hawley, by Bill Rockenbach who inserted the following code - “Sub FindWord()”
Option Explicit
Sub FindWord()
Dim Sentences
Dim Word As String
Dim i As Long
Dim iWordPos As Integer
Dim lRow As Long
Dim sWord As String
If this is a possibility for what I'm looking for, I’m not sure how to implement it into my situation.
Move Rows Based On Specific Text Being In Column
Mar 21, 2008I am trying to have rows moved from (Schedule) to (Complete) in the attached workbook. The criteria to have the row moved would be the user-selected "Status" list changing to "COMPLETE" in Column G.
I would like to have the row cut and deleted from Sheet4 (Schedule) once "COMPLETE" is selected from the list in Column G with rows below moving up. The row would then be inserted into Sheet2 (Complete) at the top of the list (Row 7) and rows would move down below the new entry. I would also like to have the formatting remain uniform (every other row fill)
Move Row Data Into Columns?
Jan 28, 2014Date
Product
Pass
Fail
Repair
Group Product 1
P
F
R
Group Product 2
P
F
R
Group Product 3
[code]....
I currently have raw data in Sheet 2
On sheet 1 would like to get the summary of the data as posted in the picture... unfortunately there are "groups" in the raw data and I need them separated and conformed to get an accurate picture.
Excel 2010 :: Move Part Columns Of Data From 6 Columns To Form 1 Large Column In Column A?
Jan 31, 2013I have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
Move Columns With No Data In Them One To The Left?
Feb 20, 2014I have a big table with a lot of data in it. I basically want to get rid of all of the empty cells, so that all the data that is there for the one person is all next to each other.
All the people's names are in a row for themselves so the empty cells would have to move to the left.
Move Data From One Column To Multiple Columns
Jan 12, 2008I am trying to move information that is pulled from a database to look cleaner and easier to read. All of the information exports out into column A only. The attachment is a brief example of what it looks like, and what I’m trying to get it to look like.
I want to move the data in col A to 5 columns C through G in groups of 16 rows. Once the last column is filled with a group of 16, it needs to fill below the first group of 16 in column B onward to column F. It should repeat this process until there is no more data in A. The attachment shows it much better than i can explain it.
I have some basic experience with formulas and macros, but I haven’t had any luck trying to manipulate any of them to give me the information the way I have shown. I would prefer to not have to manually type or cut and past the information in if possible.
Move Data From 127 Rows To The End Of First Row?
Jun 18, 2014I'm trying to adapt a macro written elsewhere on this forum for my purposes. I need to move 127 rows of data into one row. The macro written does exactly what I would like, except that it only works for 3 rows, rather than 127. How do I get this to work?Here's what I have so far:
[Code].....
Move All Data Rows Up 1 Row
Sep 6, 2006I created a macro that is supposed to copy the contents of about 500 rows, and move them all up one row. One of the things that is contained in those rows are a bunch of links to Microsoft Word documents. When I try to move the 500 rows up manually (just copying, and pasting one row higher), it works fine. The link remains entact.
However, when I use the macro I recorded, the link no longer works. It looks like it is there (the text used to represent the link is there), but when you click on it, nothing is there. Here's my code....
Move Data From Many Rows To 1 Row
Nov 17, 2006I have attached a sample file and would like to have the expected format as shown in the attached. Would greatly appreciate if someone could show me the faster way of reformating the data instead of doing it manually.
View 3 Replies View RelatedFormula To Move Data On Same Row And Deleting Empty Rows Between Data
Jul 17, 2014formula to make data on same line.On converting data2 is above data 1. I insert a column on left . Need to use mouse right click shortcut delete manually shift cells left and then delete shift cells upto have both data on same line but should be in different cells and same sequence per attached ALSO TO REMOVE "/ -DASH HYPENS.
What I need is formula to move the data2 on same alignment and to delete the two empty rows between both data.
See annexed file for expected results.I have preference to have a formula much more.
How Do I Stop The Previous Data From Being Wiped Out Once I Move On In Columns
Jan 30, 2007=IF(AND(EOMONTH(TODAY(),COLUMN()-2)<TODAY(),(TODAY()<EOMONTH(TODAY(),COLUMN()-1))),Sheet2!C10,"NO VALUE")
The above formual resides in each cell in row 1 column g inclusive.
The question is when I move over columns the previous column with figure is wiped out because false "no value" becomes true.
How do I stop the previous data from being wiped out once I move on in columns?
Move Data In 1 Column To 4 Different Columns Keeping Same Order
Sep 22, 2008I have a table with one column of data. The data in this column repeats with 4 relevant pieces of information that I want to put in 4 different columns (fields) in a different spread sheet (or the same would work better and I would just delete the first column when done) keeping the same order the data is now in.
The data currently repeats in a regular pattern (i.e. 123412341234 with no other data in between). I would like to do this with a macro. Could someone help write a macro that will do this
Move Data From Single Column To Multiple Columns
Feb 29, 2008I saw this thread from June Cut & Paste Macro: Move Address From Column To Row and I think this what I would like to have my macro do. I have one column which is copied and pasted as text in excel and there is several blank rows.
I attached the spreadsheet example - it has 40 lenders, with the top row being the lender name (A1), followed by address(A2), city-state (A3), two blank rows(A4-A5), lender type (A6), approved date (A7), one blank row (A8), lender specialty (A9), telephone (A10) , e-mail address(A11) and two blanks rows (A12-A13) and A14 starts over again. For this example there should be 8 columns and 40 rows (lender name, address, etc...). As I mentioned I think the previous thread's macro would work with some minor tweaks. I couldn't figure out the best way to handle the blank rows and or remove the blanks and what to add or take out of the macro code.
Compare And Move Rows Of Data
Jun 28, 2007I need to run the same database dump every day and find the differences. Both spreadsheets will have the same column headings, with Column A being the lookup value. Each spreadsheet will have many columns of data. I need to find the differences from Row 1 on spreadsheet A with Row 1 on spreadsheet B.
Example:
Spreadsheet 1, Column A value is 900026. Need to find 900026 in Column A on Spreadsheet 2. Compare all the data in each column to see what has changed. If anything has changed on Spreadsheet, copy the row from Spreadsheet 2 onto a new sheet and 'tag' which data has changed.
Also, again using Column A as the identifier, if there are rows on data on Spreadsheet 1 that do not appear on Spreadsheet 2, copy the entire row onto a new sheet and tag it as "Not on new datadump". And vice versa, is there are rows of data on Spreadsheet 2 that do not appear on Spreadsheet 1, copy the rows of data onta a new sheet and tag it as "Not on old datadump".
Move Delimiter Data To New Rows
Jan 3, 2008I ran across this macro in the posting " Move Adjacent Cell Into Rows, Same Column" and it is exactly what I need but when I try to use it I get a compile error on the Range("i1").Resize(n, UBound(b, 2)).Value = b. and several other problems. I also change "b" to "c" because this is where my data that I need to work with is located.
I have a similiar case much like the posting statement above where I have a spreadsheet on each row in cell "C" a EP CODE that have various information in it. My problem is that in the EP CODE column, it contains several EP CODE separated by semicolon (";") delimited . In order to serve my needs, each EP CODE instance needs to become a new row (record) whereas all of the information (except for the EP CODE) is the same and need to be repeated for each new row. Example: Before
Name Location EP code
WillisFremont 1;2;3;4;5;6
RaysSan Fran 7
SuNew York 8;9;10;11
After
namelocation EP code
WillisFremont 1
WillisFremont 2
WillisFremont 3......................
How To Match Data In Two Columns And Also Move Data To Appear On Same Row
Sep 25, 2013I have names is Column A (about 200) and names in Column B (about 800) along with additional info in other columns. Column A was just added to an existing spreadsheet and will be deleted once I accomplish my task. The goal is to come up with the 200 names in column A along with the additional info in the other columns (address, phone) and to delete all of remaining names in B (about 600, 800-200) I'm trying to figure out the most efficient way to do this. I'm not sure if there is a function to match the text in Column A to Column B and at the same time move the row in Column A to match the row the name is located in Column B.
For example John Smith is currently in A1 and John Smith is in B7 and then John's phone number is in C7. I want the John Smith in A1 to move to A7. If I can make that happen for all 200 names I will then delete all rows with no entry in column A.
Move Column Data To Row Then Delete Those Rows
Jul 23, 2007We have a client that provided us with a text file that we imported into
Excel. Rather than have the entire record in one row, they have the record
in 4 rows.
What I need a macro or something to do is move award 2 award 3 and award 4 into the same row and after doing this delete the other rows.
Below is an idea how this looks.
1JohnSmithstreetcitystateZIPaward 1
2JohnSmithstreetcitystateZIPaward 2
3JohnSmithstreetcitystateZIPaward 3
4JohnSmithstreetcitystateZIPaward 4
5BillJonesstreet2city2state2ZIP2award 1
6BillJonesstreet2city2state2ZIP2award 2
7BillJonesstreet2city2state2ZIP2award 3
8BillJonesstreet2city2state2ZIP2award 4
What we need for our data to work is:
1JohnSmithstreetcitystateZIPaward 1award 2award 3award 4
2BillJonesstreet2city2state2ZIP2award 1award 2award 3award 4
Data Loop - Move Certain Rows Between Two Keywords
Sep 19, 2013I have a workbook with part data. Each worksheet is an individual part with its data on that sheet. I'm trying to move certain rows between two key words to a separate wb/ws for the top key word. Data looks something like this:
Supplier 1
row
row
row
Supplier 4
row
row
Supplier 15
row
row
row
As I said, each sheet could have only one supplier or a dozen. The number of rows between each supplier also vary. I was trying something like this to do what I need to do:
Code:
DistiStr = "Supplier 1, Supplier 2, Supplier 3, etc etc etc"
DistiArr = Split(DistiStr, ",")
intDistiMax = UBound(DistiArr)
Set VendorWB = Workbooks.Add(xlWBATWorksheet)
VendorWB.SaveAs Filename:="Vendors"
[Code] .......
I see where my logic problem is: It's looping through a3 - lastrow, but I'm going one row extra each time, so when it goes to the top of the loop again, I'm one row to far starting off. I originally did this because if there's only 1 supplier on the sheet, there won't be another supplier name below it to give me my range.
Move Blocks Of Data In 1 Column To Rows
Nov 15, 2006Moving Data And Deleting Blank Rows. I am a complete newbie to excel VBA and require assistance (if at all possible). I have data in the following format in an excel sheet (I have a lot more rows but give an example for two rows)... in 1 column but I wish to separate it (i.e. move data along onto the first row in other columns) and delete blank rows.
For Example:
Col1
AAAA
BBBB
CCCC
DDDD
EEEE
AAAA
BBBB
CCCC
DDDD...............................