I have a set of data that has a store number in cell A1, the store name in B1 and then the store address in C1, C2, and C3. This pattern repeats for all ~300 stores. I am trying to get all of the store data on one row per store.
I have a set of data that looks like this:
If the row contains a text like ABC in multiple columns in a sheet it has to copy the whole column from that sheet and paste special into another sheet.
View 2 Replies View RelatedColumn A is numbered 1 -100 successively Column B thru D contains data that goes with the assigned number in column A. I need to be able to move rows of data in column B through D to a different set of rows all at the same time (not one cell at a time) without disturbing the set numbers in column A. And with that, have all the other rows of data automatically adjust accordingly(not to be deleted or replaced).
View 1 Replies View RelatedI need a way to move every 7 rows into columns.
So rows 1-7 become columns 1-7, rows 8-14 into columns 1-7 etc.
I have data that I want to move to columns:
-----A
1 Apples
2 Bananas
3 Oranges
4 Watermelon
5 Grapes
6 Kiwi
It should move every two rows to columns, like so:
-----A------------B
1 Apples-------Bananas
2 Oranges -----Watermelon
3 Grapes-------Kiwi
4
We have to copy from lot of Java webpages
1. Data of single column 3 rows of data to First blank cell in 'C' column (say C6)
2. Then Transpose it across to the same row into 3 columns (from same C6 to d6 & e6)
Here I tried some VBA but needs how to put it across....
So, I have a column with data on rows as follows below. I need to arrange the data below in such a way that I have on first column the company name, second column the contact person and so on depending on what data is found (tel, e-mail, website).
The data is on rows and I have separated each company/group of data with a row between them. There are in total aprox 200 companies/groups of data that I need to arrange as explained above.
I have tried with transpose but I have to manually do it 200 times. I have tried with an indirect formula but the companies/groups of data do no have same amount of info/rows e.g. some lack the phone number or other data.
if there is a method to save the time and not arrange them manually.
Actinote
Contact: Toine Kets
Managing Director
Str. Tache Ionescu 3, Et. 5, Apt. 10
[Code]....
I am using Excel 2010 and need a macro that can convert data from rows to columns. I have read several posts about this subject but have no experience with macros and don't know how to change the macros to fit my scenario.
Here is what I currently have:
Account...Vehicle1...Loc1...Vehicle2...Loc2...Vehicle3...Loc3...Vehicle4...Loc4
11111......2008........FL
11111......2000........FL
12121......1999........GA
33222......2000........AL
33222......2011........AL
33222......2001........MS
Here is what I need it to look like:
Account...Vehicle1...Loc1...Vehicle2...Loc2...Vehicle3...Loc3...Vehicle4...Loc4
11111......2008.......FL.......2000........FL
12121......1999.......GA
33222......2000.......AL.......2011........AL......2001.......MS
There are up to 4 vehicles/locations per account number, and I need 1 account number per row (the dots above are for spacing only and not part of the actual data).
I could do this manually but because I have so many rows of data it could take days or weeks. Is there a macro out there that can do this??
I download our monthly bank transactions (.csv). I have a workbook with sheets named for each creditor or expense.
I would like move each row, based on the specific word in a cell row, to the specific worksheet.
Here are some typical transactions in the Description column:
Some are specific:
1/7/2008ACH WEB-SINGLE 9085863 VONAGE AMERICA VONAGE
“Moved to the Vonage worksheet.”
Others are not so obvious:
2/1/2008CHECK CARD PURCHASE XXXXX4636 BOSTON MARKET #0450 GREENSBURG PA
“Moved to the Eat Out worksheet.”
2/21/2008CHECK CARD PURCHASE XXXXX4636 ASPCAPS XXXXX0028 MD
“Moved to the ASPCAPS worksheet.”
2/19/2007POS PURCHASE POS54309901 0014264 PITTSBURGH ST GREENSBURG PA
“Moved to the Grocery worksheet.”
I was able to find the following while during a Search:
Move Cells Containing Specific Word In Column To New Sheet
The question was answered, in addition to Dave Hawley, by Bill Rockenbach who inserted the following code - “Sub FindWord()”
Option Explicit
Sub FindWord()
Dim Sentences
Dim Word As String
Dim i As Long
Dim iWordPos As Integer
Dim lRow As Long
Dim sWord As String
If this is a possibility for what I'm looking for, I’m not sure how to implement it into my situation.
I am trying to have rows moved from (Schedule) to (Complete) in the attached workbook. The criteria to have the row moved would be the user-selected "Status" list changing to "COMPLETE" in Column G.
I would like to have the row cut and deleted from Sheet4 (Schedule) once "COMPLETE" is selected from the list in Column G with rows below moving up. The row would then be inserted into Sheet2 (Complete) at the top of the list (Row 7) and rows would move down below the new entry. I would also like to have the formatting remain uniform (every other row fill)
I have a cell that has a comma separated value that is 354 fields long. As such, if I use the Text To Columns feature to split the data at each column, I lose several columns (because excel cannot have that many columns).
How can I break the data at the comma, but have it list in rows instead?
i am trying to write a macro to find the text "total" in the first row and first column. and this macro works fine for first row:
View 5 Replies View RelatedI am wondering how I can highlight rows that contain the same text across selected columns (not all). For example, consider the following table:
ID#6527
Jay
yellow
dog
[Code]...
I want to focus on Columns B, C, and D. I would like rows 3 and 5 to be highlighted, since they share the same text across the target columns. I assume this can be done via a formula in Conditional Formatting, but I'm not sure.
I am working on a time management sheet for my company. I need to be able to click a button and have the file search 3 columns for a persons initials and then hide all the rows where the initials are not in at least one of the three columns. I seem to have no problem getting it to work for one column at a time, but as soon as I try to search more than one it all falls apart.
I will also need to create an unhide all button to reset the sheet after the macro has been run.
I have attached a sample of the sheet below. Each project needs to have 3 rows to show the schedule and budget broken down by each team member.
Project Number
Address
Service
PM
SS
[Code]....
I am trying to get a macro to run in excel that takes a simple text to columns command in one line of data and runs the command on a loop through however many rows of data there happen to be.
I've attached two screenshots - one with what I've got now (Before.jpg) and what I'd like to have after the macro runs (After.jpg). The code below is what I used to get the first text to column breakout, which I can hopefully run on a loop to breakout anything in the DEPT column that contains a "/". It can ignore the rows that only have one department to begin with.
Selection.TextToColumns Destination:=Range("K2"), DataType:=xlDelimited, _
TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=False, Tab:=False, _
Semicolon:=False, Comma:=False, Space:=False, Other:=True, OtherChar _
:="/", FieldInfo:=Array(Array(1, 1), Array(2, 1)), TrailingMinusNumbers:=True
Eventually I'll want to create another macro that transposes the breakout text back into the DEPT column and populates it with the corresponding data, but I figure I'll take things one step at a time.
Attached Images
Before.jpg‎
ter.jpg‎
I found this code on Ozgrid to sort all columns of a worksheet that were continuous with no gaps or spaces that works well:
Sub CopyToA()
Do While ActiveCell <> ""
Range(ActiveCell, ActiveCell.End(xlDown)).Cut Destination:=Range("a65535").End(xlUp).Offset(1, 0)
ActiveCell.Offset(0, 1).Select
Loop
End Sub
However, I've tried to manipulate the code myself to 1) find all columns that aren't empty then 2) sort each column individually (WITHOUT expanding the sort to other columns) and 3) combining all the numbers into one seperate column. There are many posts concerning sorting but not one that addressed this particular situation.
I am trying to write a macro that will take data from column A and use it as a column header in column C, and then take the corresponding data in column B and list it under the column header in column C. When the value in column A changes it will move on to column D and then list the corresponding data from column B underneath it in column D until all of the data in the 2 columns is spread across the worksheet. Example:..............
View 2 Replies View RelatedI am trying to write the contents of a worksheet to a notepad file. Also, the worksheet has some hidden columns.
I am trying to count the # of rows in a spreadsheet in which there is non-blank text data in 2 separate columns. For instance, if the spreadsheet looked like the one below (dashes just for formatting purposes):
NAMES-------THIS-------------THAT
Mary-------some text--------some more text
John-------<blanks>---------just text here
Sue--------just some here-----<blanks>
Dave-------something--------something else
Adam------<blanks>-----------<blanks>
The total # of rows with something in both the "THIS" and "THAT" columns above would therefore be 2.
I am having to write a vba code for a survey data captured code online.
I am attaching the code and the vba module that is suupose to do
following things
2) dELETES THE LAST 3 COLUMNS
3) Initial 6 letters from each cell (Q0001=) UPTO (Q00011=)
4)Inserts new row at top from Q1 TO Q11
5) Sorts data on Q6 (Faculty/Staff)
Before all this the i need to insert blank cells for questions that have not been answered and shift the cells right (condition 1) ....
I have a macro that converts all my PDF Purchase Orders to a text file and inserts the data/text horizontally into another document. However because the PDF's or the text within the PDF can be fomatted differently (that is on different lines etc) it therefore imports the information and it looks mis-aligned.I have attached a simple spreadsheet showing some sample text as it is imported and then below this how it should look like, all in line.
The range where the highlighted text in red is, is variable (but say nothing more than a variant of 10 columns). The text can also be Uppercase or Lowercase.So, I was wondering if there is macro code to find the "text" on various rows/columns and align it all in another column?
I have a worksheet in which I have sorted the data based in date and numbering (column I and E). I would like to create 2 macros for following actions:
1- all rows with the value "TOM" in column C will have to be deleted.
2- all rows with a value of 601 or 602 in column E, will have to be moved to the bottom of the sheet after the last row with data. The rows that have been moved will have to be sorted based in date (column I) and numbering (column E).
I have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
I've got an excel file with over 20,000 rows with Column A being having values of a "Vendor Number" while Column B has a "Vendor Name" Here is an example:
Vendor #Vendor Name
1001ABC Supply
1002Larry, Moe, Curly Inc
1003John Smith
1004Fred, Wilma, Barney LLC
I'd like it to find the rows where the Vendor Name has a comma present, and then put it in another sheet, or in another column like column C and D. If I can't get both the Vendor # and Vendor Name re-inserted someplace, that is OK. The Vendor Name is the big one.
I have 3 columns and 200 rows. The first column is for Name of product. 2nd column for number and 3rd for $value of number of products. Have 200 rows. Have done a sort and checked. 2 sets of rows are for the same product name. I want to know if it is possible to add up values in 2nd and 3rd column, 2 rows at a time , then 4th and 5th column and so forth, by some formula rather than doing it manually?
View 4 Replies View RelatedIn the attached worksheet I am trying to create a range from
C4 to C12 (all the Officer Roles) and move it to Column E same Range
and
G4 to G12 (all the Officer Names) and move it to Column H same Range
I would need to do this for the entire worksheet. i.e. move all the Officer Roles over 2 columns and the Officer Names over 1 column.
I tried to piece meal it together from code I found here, but I am getting a "wend without while" error.
I've used the macro recorder to copy a cut and paste routine, but it won't play back correctly. Here's the macro I recorded:
View 7 Replies View RelatedDate
Product
Pass
Fail
Repair
Group Product 1
P
F
R
Group Product 2
P
F
R
Group Product 3
[code]....
I currently have raw data in Sheet 2
On sheet 1 would like to get the summary of the data as posted in the picture... unfortunately there are "groups" in the raw data and I need them separated and conformed to get an accurate picture.
I started a project where I want to export data from Access (only 2 columns but # of rows vary every day). When the data that is copied to the first tab is a week old and is a Tuesday I want to copy and paste these values in the next tab.
View 9 Replies View RelatedAttempting to hide columns (of cities) via VBA generates an error when that same city is reselected (either individually, or as part of the group) in the list box, upon clicking the 'Hide' button.
The error happens at this point: ...