Moving Cells Corresponding To Date?
Dec 3, 2012
Starting on Monday and ending on Friday and then excluding the weekend dates beginning again on Monday. I would like to be able to store a value within a seperate cell.
EX:- Cell A1 contains the value of Cell B1,(B1 being Monday's value) but when the date changes so the value of Cell A1 should become the value of Cell B2 (Tuesday's value) and when the date changes again the value of Cell A1 should become the value of Cell B3,(Wednesday's value and so on). This should happen until Friday and then the calculation should evaluate the two days of the weekend and do nothing before moving on to calculating Monday's value and displaying in Cell A1 the appropiate value.
View 2 Replies
ADVERTISEMENT
Jun 6, 2007
I have a report which is usually updated on a Monday based on the previous Fridays closing reports.
In H3 I have the calculation =Today()-3
So this week this would have been 04/06/2007 - 3 days = 01/06/2007
Occasionally due to Bank Holidays etc the update moves to later in the week which messes up all of the tables which are reliant on the date 01/06/2007.
Is there a calculation which will work out the number of days between today and last friday that I could put after =Today() instead of -3, so that if the report was updated say ona Thursday it would automatically calculate Today()-6.
View 9 Replies
View Related
Apr 17, 2014
The attachment below is a basic example of what I am trying to accomplish. I am looking for VBA code to take data from E3 in "Historical1" sheets and move it to down into the table in column E that corresponds to the date in D3. The other "Historical" sheets will work the same way. Cells D3 and E3 in each of the "Historical" sheets equal back to cell on the "Entry" sheet. This is a very basic example of the ultimately bigger data base I am building. why I am utilizing a entry sheet to elevate the need to go to each sheet and enter data.
View 2 Replies
View Related
Jun 17, 2014
I am a production manager for a homebuilder and I am trying to create an Excel spreadsheet that will allow me to input a date in a column and have a second column dependant on the date and move as I change the date.
Since no work is done on weekends, I'd like the output column to skip weekends and move the input to the next available weekday. I have conditionally formatted the date to be a red fill as a visual cue but I'm not sure where to go from here.
View 7 Replies
View Related
Jun 22, 2009
I want to move an entire row in spreadsheet A to the next empty line in Spreadsheet 2 if a date(any) is entered into column J.
View 9 Replies
View Related
Aug 7, 2012
I would like to move columns to the right as the date changes. For example, the top of the column has the current date. Within the column are about 40 rows of data. as the date changes, I would like that column to automatically move to the right and show that column with yesterday's date, and have that data associated along with it moved. I am looking for 6 months of columns to store, with the current date in the first column and subsequently moving right with the previous dates and info.
------------------------------------------------------------------------------------------------
August 7, 2012 | August 6, 2012 | August 5, 2012 | August 4, 2012 | August 3, 2012
------------------------------------------------------------------------------------------------
Accepted Processed Accepted
Rejected Accepted
Processed Processed
...
and so on
View 2 Replies
View Related
Jul 5, 2006
I have a worksheet that has all weekday dates in column 1 and values in column 2. I want to create a 30-day moving average based on the last (non-zero) value in the column 2.
Since every month has a different amount of days, I want it to search the date that has the last value (since I don't get a chance to update it daily) and go back thirsty days from that date and give an average of all the column 2 values skipping and values that are null or zero.
View 13 Replies
View Related
Sep 23, 2013
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies
View Related
Feb 9, 2013
About half of the time when I move the contents of a cell I get the message "The Clipboard cannot be emptied. Another program might be using the Clipboard"
View 14 Replies
View Related
Nov 23, 2009
I am trying to move a group of cell containing formulas from one sheet to another, I have tried copy & paste/ ctrl & alt / paste special but for some reason the initial cell references of the formulas are not updated.
View 3 Replies
View Related
Apr 1, 2008
I have a excel spread with a range of A1:H64. The spreadsheet is designed for the user to enter information into the appropriate cells, i.e. user ID in cell D4; name in cell D5; and date in cell F5. My question is instead of the user scrolling around and finding the cells that require input is there a way to set the spreadsheet where the user tabs and/or uses the enter key to move around and go only to the cells that require input and not to the ones that are locked and protected?
View 9 Replies
View Related
Aug 26, 2009
it is possible to move a row of cells with (names in each cell) to a column. Basically, I want the list of names to go from top to bottom rather than left to right.
From this (each name is in separate cells)
John Jones Bob Smith Jane Morgan
to this:
John Jones
Bob Smith
Jane Morgan
View 9 Replies
View Related
May 8, 2007
I have a merged cell area, several columns wide and 2 rows deep.
I know that pressing enter before reaching the end of the first row moves to the next cell below. Is there any method, either key combination or whatever, of moving to the next row within the merged cell?
View 3 Replies
View Related
Oct 31, 2008
This is a project plan with tasks and dates. Column A is the activity number. (Example 1, 2, 3" etc). Column B is the task (Ex. "Complete Report"). Column C is number of days required to complete the task. Column D is the dependency column. (Ex. Cell D2 =1 in other words Task 2 is dependent on task 1). Column E is the date.
I would like to have a seperate start date cell and a go live date cell.
The objective is to enter a start date, and have each column E date increase based on the number of days entered in Column C. If a task is dependent on another and I change the number of days in Column C I need the dependent task to change the same amount of days.
View 9 Replies
View Related
Jun 27, 2014
following code is supposed to check whether cell contains a value and based on that either display or hide a shape. The last couple of lines are moving it. What I would need is to check all cells in a row (not only the first one) and if lets say first 1,2,3...10... cells contain a value move the shape all the way to the end of that cell and so on.
VB:
Sub Worksheet()
If Sheets("Text").Range("z6") <> 0 Then
With ActiveSheet.Shapes("Rectangle 8").Fill
[Code].....
View 4 Replies
View Related
May 25, 2014
is there an option to allow cells under a pivot to keep the same distance under the pivot table when it grows larger or gets smaller?
View 1 Replies
View Related
Nov 1, 2007
I need to identify values which are less than 0 and move those cells to an adjacent cell.
Acct Desc Amt
2100 Acct1 -10
2101 Acct2 10
The -10 cell will move one cell to the right. I have an imported list with gl accounts, descriptions and amounts and want to have the negative values moved to a new column.
View 9 Replies
View Related
Jan 7, 2008
I have a list of diagnostic procedures, some of which are for the same patient. I need a macro that does the following: move every second procedure (a couple of cells per row) of one patient number (column B) next to (11 cells to the right and 1 row up) the first procedure. But only if there's less than 3 months between the procedures (dates are in column G) and if both procedures were on the same side of the body (left or right, column L)
Is there a macro that can do this for me?
Is there a macro that just moves a couple of cells in a row 11 cells to the right and 1 row up?
View 9 Replies
View Related
Nov 2, 2009
I have been given a spreadsheet to fix as the user says the charts/graphs aren't adding the new data.
But when I looked closer at the workbook the whole thing just seemed a little wrong to me
Please see the workbook attached.
All the data is entered into the sheet 'Data Entry'.
Then on the 'Data' sheet it should pull thru some key values but half of it isn't done and it isn't very smart.
I have created a 'TEST Data' sheet so I could start messing with it.
I was going to pull the data thru from 'Data Entry' into the 'TEST Data' sheet using a Hlookup to make sure it worked before i messd with the actual 'Data' sheet.
The problem I am having is moving/copying the Hlookup across.
On the 'TEST data' sheet the Hlookup is as follows and is correct:
=HLOOKUP($A$5,'Data Entry'!$C$4:$M$472,2,FALSE)
But the next set of (Week 2) is not in the 2nd or even 3rd row of the array, its in row 11......... thats 9 rows down from the original.
Moving on the data i want to bring back is always 9 more than the last so the Hlookups should look like:
=HLOOKUP($A$5,'Data Entry'!$C$4:$M$472,11,FALSE)
=HLOOKUP($A$5,'Data Entry'!$C$4:$M$472,20,FALSE)
=HLOOKUP($A$5,'Data Entry'!$C$4:$M$472,29,FALSE)
etc etc
Can any of you guys out there help on how I can do this or it may not even be a Hlookup but something even smarter!!
View 7 Replies
View Related
Jul 28, 2013
I have 2 sheet in Excel. Sheet1 I rename main page and Sheet2 I rename database. In my main page I use tab key to be moving from within 3 cells (B5,B6,B7) that are different to include data. How the data may be stored in sheet database. When we fill data in main page how to evacuate data to fill second data.
View 1 Replies
View Related
Apr 29, 2014
I have a Rental Form that i'm working on, and to tidy things up when I print it out, I would like to move a cells data down 1 row if that cell is empty. Here's what I have:
cell b8 - First and Last Name
cell b9 - Address1
cell B10 - Address2
cell b11 - City, State, Zip
cell 12 - Phone #
etc.
Not too many people have an address2, so when that field is empty, I'd like to move Address1's data down to it's position (address2). If address2 has data in it, leave address1 where it is. Simple right? This moving would happen when the command button is hit and the form data goes to sheet 1 which works fine.
View 10 Replies
View Related
Aug 15, 2007
I have a column of data that contains various blank cells where no data was measured. In the adjacent column I want to take the moving average of the last 4 data points including the most recent entry. My problem is i do not know how to handle blank cells where there was no data. I need it to average the last four in the column where data acutally exists. I am ok with using helper cells if needed and I am not worried about the first four results at this time.
Example data
A..................B
15
50
25
20................55
Blank............55
30................31.25
35................27.5
blank............27.5
blank............27.5
15................25
10................22.5
15................18.75
40................20
blank.............20
View 10 Replies
View Related
Jan 27, 2011
I am trying to design a spreadsheet for planning a project schedule. Down the left are the dates, across the top are the resource names and in the content are the activities being carried out.
Each activity I have is given a two letter prefix, e.g. TD = Training Delivery. I then have conditional formatting applied to each cell to change the cell colour based on the two letter prefix. In all there are six conditional formatting rules.
Now, my problem is that I need this sheet to be really fluid. I want to be able to drag and drop blocks of activities to a buffer area at the side and then drag them into another part of the schedule. However, when you drag and drop (effectively cut and paste) the activities around the conditional formatting moves with the cut content, whereas I want it to remain where it was. I guess what I'm after is a way of dragging and dropping values only.
The best I've come up with so far is an onChange macro that reapplies the conditional formatting to the relevant part of my spreadsheet, but I can't believe this is the most elegant solution. Is there perhaps a way of triggering a macro onPaste?
View 7 Replies
View Related
Jul 6, 2012
I've got this large data set that I need to edit. My problem is, the clients name and address are contained with in one cell eg, John Smith, Alba Road, Bigtown. Is there some way of transferring this address into three different cells foe filtering?
View 2 Replies
View Related
Apr 26, 2006
A spreadsheet that can be used to enter the hours worked by staff each week and then calculate their Gross pay, Tax and Net Pay. THe basic spreadsheet has been created, however it will require aq macro to copy the Week ending, Hours worked, gross pay, tax and net pay columns to the first empty cell in row 1, clear the entries in the week ending and hours worked columns that have just been created and then hide the give columns to the left. which show the data for the previous week.
I know this sounds confusing but ive supplied the file to help you understand. The problem is that we can get the macro to hide the previous five entries and copy 5 new ones in their place but it only does this once. Just about our whole class is having trouble with this as we're not very advanced in macros.
View 2 Replies
View Related
Jun 14, 2006
i have a row, A2-A7
there is data in each cell
can i make it so i move any of the cells up or down a row or wherever and they will all move in a unit as if they were merged? i dont want to merge though because then that will screw up the data?
View 3 Replies
View Related
Jun 27, 2014
How to make a formula with references to certain cells, so I can sort the sheet but keep the formula referring to the same cells as before the sorting?
In the example I illustrated the problem: when I sort the data, the formula refers to the same cells which have now different values, so the calculation is not right anymore.
View 1 Replies
View Related
Apr 4, 2013
I have a worksheet that I will be allowing other to access so that I can get them to input certain data. I will be protecting the sheet to avoid having them inadvertantly overwrite any of my formulae. So, I have a matrix on the left for them to input data into with calculations to the right that they cannot change. Can I prevent them from moving cells within the input matrix
View 1 Replies
View Related
Feb 23, 2014
I am looking to remove all blanks from a table I have and move all the data left. Right now the data is by date, and some dates are blank for some players (it is a basketball sheet) and filled for others, but I want to see it by game. So I have what is in the first table below, and I want it to look like what is in the second.
2-22-2014
2-21-2014
2-20-2014
2-19-2014
2-18-2014
[code].....
View 3 Replies
View Related
Feb 8, 2013
I need to remove numbers from a string of text and put them into new cells in Excel Starter 2010. There are two different values which need moving. The first is in parentheses and the second follows the parentheses.
Here's a few examples of what I mean:
Original text
RED008 - Wickaman and Hoodlum bandwidth (0.06Gb @ 2.00) 0.12
MFR005EP - Various Artists bandwidth (0.19Gb @ 2.00) 0.38
RAZORS010 Future Cut bandwidth (0.01Gb @ 2.00) 0.01
would like to split into...
Cell 1
RED008 - Wickaman and Hoodlum bandwidth
MFR005EP - Various Artists bandwidth
RAZORS010 Future Cut bandwidth
Cell 2
(0.06Gb @ 2.00)
(0.19Gb @ 2.00)
(0.01Gb @ 2.00)
Cell 3
0.12
0.38
0.01
View 4 Replies
View Related
