Moving Date Calculation
Jun 6, 2007
I have a report which is usually updated on a Monday based on the previous Fridays closing reports.
In H3 I have the calculation =Today()-3
So this week this would have been 04/06/2007 - 3 days = 01/06/2007
Occasionally due to Bank Holidays etc the update moves to later in the week which messes up all of the tables which are reliant on the date 01/06/2007.
Is there a calculation which will work out the number of days between today and last friday that I could put after =Today() instead of -3, so that if the report was updated say ona Thursday it would automatically calculate Today()-6.
View 9 Replies
ADVERTISEMENT
Dec 3, 2012
Starting on Monday and ending on Friday and then excluding the weekend dates beginning again on Monday. I would like to be able to store a value within a seperate cell.
EX:- Cell A1 contains the value of Cell B1,(B1 being Monday's value) but when the date changes so the value of Cell A1 should become the value of Cell B2 (Tuesday's value) and when the date changes again the value of Cell A1 should become the value of Cell B3,(Wednesday's value and so on). This should happen until Friday and then the calculation should evaluate the two days of the weekend and do nothing before moving on to calculating Monday's value and displaying in Cell A1 the appropiate value.
View 2 Replies
View Related
Apr 17, 2014
The attachment below is a basic example of what I am trying to accomplish. I am looking for VBA code to take data from E3 in "Historical1" sheets and move it to down into the table in column E that corresponds to the date in D3. The other "Historical" sheets will work the same way. Cells D3 and E3 in each of the "Historical" sheets equal back to cell on the "Entry" sheet. This is a very basic example of the ultimately bigger data base I am building. why I am utilizing a entry sheet to elevate the need to go to each sheet and enter data.
View 2 Replies
View Related
Jun 17, 2014
I am a production manager for a homebuilder and I am trying to create an Excel spreadsheet that will allow me to input a date in a column and have a second column dependant on the date and move as I change the date.
Since no work is done on weekends, I'd like the output column to skip weekends and move the input to the next available weekday. I have conditionally formatted the date to be a red fill as a visual cue but I'm not sure where to go from here.
View 7 Replies
View Related
Jun 22, 2009
I want to move an entire row in spreadsheet A to the next empty line in Spreadsheet 2 if a date(any) is entered into column J.
View 9 Replies
View Related
Nov 9, 2009
I have a data in excel , sample sheet attached.
and i have another place for compile where all the data is summarized
What i want is
If the agent name is example 1 and his mistake is present in raw data and it matches the agent id , date and financial then i want excel to calculate how many " financial " error agent made on that particular date only so that i can assign to another agents too , to get exact data no matter in whichever series that data is inserted in excel.
if i use countif and if all the condition are met it shows me all financial mistakes count and if it shows false it turns to zero . if agent make " financial mistake " on 1st nov and he made another non financial mistake then as it should show only the count of that particular agent " financial mistake " on that date only from the given RANGE DATA
View 11 Replies
View Related
Sep 19, 2006
I have a start date, generated onto cell B4 from a user form datepicker control. I also have a course type in cell C4 that course has a constant number of days. I would like to add the number of days of the course to the start date to give me an end date in another column.
View 9 Replies
View Related
Aug 7, 2012
I would like to move columns to the right as the date changes. For example, the top of the column has the current date. Within the column are about 40 rows of data. as the date changes, I would like that column to automatically move to the right and show that column with yesterday's date, and have that data associated along with it moved. I am looking for 6 months of columns to store, with the current date in the first column and subsequently moving right with the previous dates and info.
------------------------------------------------------------------------------------------------
August 7, 2012 | August 6, 2012 | August 5, 2012 | August 4, 2012 | August 3, 2012
------------------------------------------------------------------------------------------------
Accepted Processed Accepted
Rejected Accepted
Processed Processed
...
and so on
View 2 Replies
View Related
Jul 22, 2007
If Invoice date is : 17.06.2007 & payment due date is 02.08.2007
In above please confirm formula of days calculation between above two date.
View 12 Replies
View Related
Nov 12, 2008
Need a formula that will generate the ending date of task, adding therefore if needed the number of weekend(s) in between the start and end date to the End date.
Let us say: task is starting in 2008/11/11 the duration of the task is 7 days. So, we should get an End Date= 2008/11/19.
2008 11/11 11/12 11/13 11/14 11/15 11/16 11/17 11/18 11/19
Tue Wed Thu Fri Sat Sun Mon Tue Wed
View 3 Replies
View Related
Jul 16, 2013
How calculation can be made based on the date. I have 2 sheet (MATTER and REPORT). All productions made within sheet MATTER. Then I will produce report to be printed in sheet REPORT. I only include the date and calculation every matter will be automatically made based on date and item.
View 6 Replies
View Related
Jun 1, 2009
i have a data in excel
In cell B6 , I have an amount . and in Cell C6 I have inserted the date at which that amount has been kept . Now what i want is I want the Data from D6 To O6 to calculate as to how many Days that 100000.00 Rs or Dollar have been kept each month . Each month has its own Days like January has 31 Days . So i want each Days to appear accurately. Like for example if i insert the 4-8-2009 from January till August 4-8-2009 , how many days that amount has been kept each month .
View 9 Replies
View Related
Jun 15, 2007
is a formula to work out how many paid sick days an employee is entitled to based on their employment start date
Up to 6 months service the entitlement is 5 days
After 6 months it is 20
After 1 year 40
After 2 years 60
After 3 years 80
View 9 Replies
View Related
Jul 26, 2007
I have several columns as so:
B - Patient Surname
C - First Surname
D - Postcode
E - Date
F - Results of If Statement (Days Difference)
I am looking to comapre b, c, d with teh previous cells to make sure I am looking at the same person hcen the AND statement. If they all match then if subtracts the latest date (column E) from an ealier date for the same person. If the person is different it will return a 0. If the date is the same ti will return a 0.
I have done this so far - =IF(AND(B2=B1,C2=C1, D2=D1),(E2-E1),0)
What I am struggling to do is if the number of days (E2-E1) is 0-3 then for the result to show the text "Less then 3". If the value is 4 - 7 then to have it read "Less then 7", anything over 7 to read "OVer 7".
View 8 Replies
View Related
Mar 19, 2008
i have a date in a field which is under Anticipated Win Date.
The format of this date is '31-Jan-08
the data is then copied over to another sheet which is then cleaned up.
The date format is then put into the following format
19-Dec-07
What i am trying to do is firstly devise a formula which will allow me to minus say todays date from the date entered to see if this date has passed and will the formula work regardless of the format of the date.
View 9 Replies
View Related
Jan 21, 2007
I am trying to create a system for a library but I don't know how to get the fines to automatically update day by day when a book is overdue.
View 9 Replies
View Related
Jul 5, 2006
I have a worksheet that has all weekday dates in column 1 and values in column 2. I want to create a 30-day moving average based on the last (non-zero) value in the column 2.
Since every month has a different amount of days, I want it to search the date that has the last value (since I don't get a chance to update it daily) and go back thirsty days from that date and give an average of all the column 2 values skipping and values that are null or zero.
View 13 Replies
View Related
Sep 23, 2013
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies
View Related
Jun 18, 2014
I have a pivot table with a field called "created on" which is a series of dates, i want to create a field called "Days in Pipeline" which would essentially be =TODAY()-'Created On'
This doesn't seem to work, i get an error: Your formula includes a function that cannot be used in PivotTable formulas...
View 1 Replies
View Related
Feb 10, 2014
I am prepare budget salary base on actual joining date and budgeted joining date. I can only manage to get the formula by joining month not by joining date
View 10 Replies
View Related
Aug 21, 2009
Would it be possible to calculate difference between 2 or more dates in the same Cell?
Dates are in the format shown below (Always seperated by a comma):
Cell A1 = 29Jan2009, 31Jan2009, 14Feb2009, 27Feb2009, 31Mar2009.
In the above case there are only 5 sets of dates, in some cases there are more and in some cases there are less. Between Min 2 dates - Max 7 dates.
Am looking for a result like : 2,14,13,12
Am not well versed with VBA, hence would prefer a formula. Currently am doing Text to Column and working on the same. And that process is time consuming. Would there be a short cut ?
View 9 Replies
View Related
Oct 29, 2009
I have start date(Column A) and an end date(Column B) in two columns and I have found out the difference between them in column C in hh:mm:ss format. I want to find out how many cases are greater than 2 Hrs but less than or equal to 4 Hrs.
View 9 Replies
View Related
May 11, 2006
I am trying to subtract two dates to find out whether an invoice is 6 months past due (regardless of number of days). I use DATEDIF in my formula and it works fine until now. It seems the function takes number of days into account and won't return the desire result when there are 31 days. I want to find out whether the number of months between two date are greater than or equal to 6 months without considering the number of days. I am attaching a sample worksheet for better explanation. As you can see, October is not working right.
View 5 Replies
View Related
Jan 13, 2007
I am attaching an Excel file where I am trying to calculate lead time (even if a negative number of days) to a next activity based on projected dates based on a 'cycle start date'. I am trying to perform this with e complicated IIF statement which you can see from the attached file.
Note: this file is created from a vb.net application at runtime where this excel file is actually an xlt template. I attached it as an xls to make it easier to look at. EDIT: I have a flag in the Annual/Semi-Annual that blanks out cells that are not needed if Annual. It causes my LeadTime Col. to blow chunks and I can't seem to get past an error in the formula since adding this.
=If(F3>=NOW(),F3-NOW(),If(G3>=NOW(),G3-NOW(),If(H3>=NOW(),H3-NOW(),If(I3>=NOW(),I3-NOW(),If(J3>=NOW(),J3-NOW(),"CycleStart Null"))))). Replaced Zip file
View 2 Replies
View Related
Apr 7, 2014
I am looking for a single formula I can run along a single row that looks at several columns of data, and then checks if the date range falls between the running row, take it's relevant number, and multiply it by a single rate. The attached probably explains it clearly - I think the solution would be some sort of Sumproduct, but my attempts have failed!Example - Date Range with Calculation.xlsx
View 10 Replies
View Related
Dec 10, 2013
Here is what I have:
A B C D
Date ReceivedApproved DateDenied DateTurn Time
1/1/14 1/13/14 9
Turntime is calculated with this formula:
=IF(A4<>"",IF(COUNT(B3,C3),NETWORKDAYS(A3,IF(B3<>"",B3,C3)),""),"")
What I need is to not count the first day it is received in the calculation for the Turn Time. So in this instance I need the Turn Time to say 8 instead of 9. If I just subtract a 1 then I get an error if the Approved Date or the Denied Date are not filled in yet.
View 4 Replies
View Related
Feb 4, 2014
This formula is being used in a vacation time spreadsheet. So after each paycheck the if statement is applied and need to calculate the accumulation for that week based on if the person has worked 5 yrs or less. I need to stop the today's date calculation in the if statement after it is used. So that each time the spreadsheet is opened the values are a fixed number not changed based on the current date. However if the if statement is pasted into the next pay week it will calculate based on the actual date.
It is calculating is the following:
C4 = 5yrs Anniversary Date of Hire
3.08= less than 5 yrs
4.62= more than 5 yrs
=IF(($C$4)<=TODAY(),4.62,3.08)
[URL] ......
View 1 Replies
View Related
Oct 5, 2013
I have three columns named "name","start_date" and "end_date"
ex:
Name start_date end_date
AB 9/11/13 10:19 AM ??
CD 9/12/13 11:45 AM ??
All i need to find is,
If Name = AB, i want put start_date+3 days in the end_date column,
similarly for name = CD , start_date+7 days.
But the calculation should exculde weekends(sat and sun).
ex: For AB, start_date = 10/3/13 (3rd oct , thrusday), end_date should be start_date+3 ,so end_date = 10/6/13 but 6th october is sunday so the formula should give end_date as 10/7/13.
View 4 Replies
View Related
Jun 11, 2009
I have a worksheet that contains investment security purchases, including purchase date, purchase amount and maturity date, each in its own row. I need to develop a formula that will sum the purchase amount based upon the term in days (maturity date - purchase date) of the investment. The respective rows do not contain the term in days so the formula will need to calculate the days to determine the aggregating criteria described below.
One cell should contain the aggregate security purchase amount whose term is 1-90 days and another cell should contain the aggregate security purchase amount whose term is over 90 days. It seems that SUMPRODUCT with a condition is the best way to handle this; however, I cannot get the correct syntax of this formula.
View 8 Replies
View Related
Sep 24, 2011
Short Version: I need to find a way to have the date in a cell be used for both a calculation (one date subtracted from another) AND a conditional format (Cell changes color based on the month). Cell format is mm/dd/yy
Explanation: We enter information for each work order on a row in our Master Work Order List. For each new work order we start a new row at the bottom of the sheet.
We calculate each work order's throughput time by having a formula in column F that subtracts the Start Date in column D from the Complete Date in column E.
F#=E#-D#
All date values are entered as mm/dd/yy and the cell format is mm/dd/yy.
At the end of the month, we put an AVERAGE formula into a cell in column H and, for the sources, use all cells in column F that represent work orders that were completed for THAT month. The problem is not all work orders complete in the order they started and some can start in one month but not complete until 2 months later, so we can't just click-drag a bunch of cells in a column. Sorting doesn't work because after we click and drag a bunch of cells and get the average, when we re-sort back to Sort by Work Order Number, the clicked-cells don't move, but the data does.
We end up just looking up and down column E looking for dates from this month and hope we got them all.
So I thought, "Hey, I know, I'll put conditional formats into column F so that if the date in column E starts with 01 (January), the cell in column F will turn Red, and if it's 02 (February), the cell will turn Orange and so on through the end of the year! That way we could just look for a given color each month and are MUCH less likely to get it wrong!
I added conditional formatting using the LEFT(E#,2) formula, hit [Enter] and... nothing.
I thought, "I"ll set the cell formats to TEXT so the LEFT formula 'sees' the month number!"
So I set the cell formats to TEXT and then the conditional format 'sees' the '01' for January and changes color!!
But now the Throughput Time formula (=E#-D#) doesn't work.
I think it's because Excel can DISPLAY a date as mm/dd/yy (due to Date Format), but it actually calculates date information based on a number that REPRESENTS the mm/dd/yy. I read that Excel 'sees' each date as a number representing time passing, not as "mm/dd/yy" and uses that number for calculations.
SO, is there a way to have a cell's date be 'calculatable' and still have it change color based on the month?
View 5 Replies
View Related
