I am trying to build a userform that will display an array of cells A1:T40. I need all of the formating to show as well. I can get 1 cell to showusing code from this forum but cannot get the full array to show.
The plan for this userform is to create a form based on information in the cell range. Then give the user the choice to print.
I am trying to build a simple tool using an userform. I have my results as a range of cells A1:A10 in an excel sheet. The result will be like:
1-1
2-4
5-8
8-8
9-14
14-14
15-16
17-19
20-21
22-23
But I want the result to be displayed in one textbox in userform.Is there any way?
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”.
I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
creating this excel file with multiple comboboxes, i was wondering if i can add another into the equation. so i can have sub-categories.
i have attached the original file and how i would like to change the layout!
i also have another question, see with the info that would go into the textbox is there anyway you can put writing on seperate lines,
eg:
Lettuce
Mayo
Tomato
all within the same cell?
I need to use two types of fonts to not only display a string of characters in a textbox but also past to a cell as viewed in the textbox.
An example string:
[#|:.010(M)|A|N(M)|B(M)]
The above string in Arial font would look like this:
[TP|Ř.010(M)|A|N(M)|B(M)]
I am simulating a GD&T instruction (Geometric Deimensioning and Tolerancing).
My dilema stems from the first character "[" and the last character "]".
I use both of these characters to open an instruction and close the instruction (as if all characters are surrounded by a rectangle).
What I cant figure out is how to isolate the first "[" and the last "]" (They will always be the first and last characters of an unknown string length). The first "[" would be an "Arial font" and the last would be an "Arial font" everything in between is another font (in this case Verisurf).
See attached example jpg file.
"verisurf1.jpg"
Verisurf uses both "[" and "]" as alternate characters. I only need to capture the first and last character if: 1. The first is a "[" and or the last is a "]". They will never be vice~versa.
I need to split content from a textbox into many cells.
The textbox isn't multiline and will contain content such as:
Rooney 18, Villa 27, Parker 54
Now I need each scorer placed into a separate cell each.
I have used a few pieces of code I have found and tried to adapt them but to no avail.
I use this vba-code in the UserForm VBA-Source(I know probably not the world's prettiest code but it works)
Private Sub UserForm_Activate()
CheckBox_ADD = False
CheckBox_Change.Value = True
CheckBox_Cleanup = False
'TextBox_ADD_Line
End Sub
Private Sub OK_Button_Form_Ctrl_W_Click()
Dim NewText As String ' NewText is used to define the input value for: ADD
I had inquired on the setup of linking multiple cells to a single cell, in which Dave Hawley graciously provided me with the following code.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Column = 5 Then Worksheets(2).Range("B1") = Target
End Sub
What changes would I need to make in order to replace the cell B1 of Worksheet2 , with a textbox on Worksheet2?
i have this userform which has 20 textboxes. these boxes are used for numbers only. however, i want my numbers, as i type them, to appear in the boxes with thousands separators. even if i don't type the commas, the numbers will be formatted as if i typed them with such. Do i have to format the textboxes one by one for the formatting that I want or there are codes that could be used for all these textboxes?
View 9 Replies View Relatedhaving a different calculations performed within a Textbox on a Userform depending on the selection made in a Combo Box. This was answered here.
Perform Calculation In Textbox On Userform
I have another question regarding this problem, however the thread is closed so I have posted a new thread.
The original question was answered and the solution works very well,however I now need to be able to use the selection from two (2) comboboxes to initiate the various calculations in a similar vain.
have a look at the original thread to get an idea of what I am looking for here.
I have tried many configurations of various code, all of which works to an extent buts which falls over in certain circumstances.
I created a userform. Now, I want to make a sum of the textboxes in my userform and pop up a warning signal is the sum isn't 18. I tried it in different manners, but I always get some problems. I entered default values of 0 in my textboxes. When I edit the values by using the userform, the popup message will appear even though the sum of my textboxes is 18. Here is the code for the pop up warning message.
If (Me.txt1.Value + Me.txt2.Value + Me.txt3.Value + Me.txt4.Value + Me.txt5.Value + Me.txt6.Value + Me.txt7.Value _
+ Me.txt8.Value + Me.txt9.Value) <> 18 Then
MsgBox "Vous avez fait une erreur. Le total ne donne pas 18 trous."
Me.txt1.SetFocus
Exit Sub
End If
Query form using text box value. I have database and a search form and i need to display only the results based on queries (text box value).
VB:
Private Sub CommandButton1_Click() FindKeywords Me.txtNo.Value & Me.txtName.Value & Me.txtParts.Value
End Sub[COLOR=#333333][/COLOR]
MOdule
VB:
Public DSO As ObjectPublic DstRow As Long Public DstWks As Worksheet
Private Sub FindKeyword(ByVal Keyword As String, ByRef SrcWks As Worksheet)
Dim LastRow As Long
Dim Result As Range
Dim Rng As Range
Dim StartRow As Long
[Code] .....
I'm so proud of how i managed to get my first VBA project working. Yet there is one thing that's missing:
I would like to know how i can get the data entered in the cells to the left actively show in the textbox to the right.
Because i want to make a standard solution that can be copy pasted from the text field easily.
Screenshot of current VBA project.
I've been looking on the forum for hours, but couldn't find exactly what I need.
I have a textbox that the user enters muliple lines of text. I, then, copy the text to a sheet. The problem I'm having is the pasted text is all in one cell. I would like each line to be in a different cell.
My textbox has multiline = true, wordwrap = true, EnterKeyBehavior = true.
I have a text document disaggregated into sentences each in different cells. I need a way of selecting different cells with a mouse, and through a Macro, have the text from those cells viewed in concatenated form into new textbox generated by the Macro.
View 9 Replies View RelatedI've created a variable number (i) of text boxes at run time (i also named them, "txt"&i, at the same time), i'm now trying to get the values entered in these to fit into a column that has been inserted during the same sub routine. I'm having a bit of trouble refering to the text boxes though, this is the patch of code i'm struggling with:
Dim TextBox As String
For i = 0 To 2 * NumVar - 1
TextBox = "txt" & i
ActiveCell.Offset(i, 0).Value = TextBox.Value
Next i
I also tried this:
Dim TextBox As Object
For i = 0 To 2 * NumVar - 1
TextBox.Name = "txt" & i
ActiveCell.Offset(i, 0).Value = TextBox.Value
Next i
I am trying to pull data from multiple textboxes on multiple worksheets and compile it into a list on a mastersheet. I have searched multiple forums and I have been unable to piece together anything. I have attached an example workbook of the data that I am trying to compile. I am trying to pull the data for the textbox next to NAME, SS#, and SCHED. I have tried recording a macro for 1 sheet and then modifying the macro to work for on all worksheets but failed miserably.
View 1 Replies View RelatedWhat I want to do is have a sub-Function that will check to make sure what is entered into a TextBox is a number, and if it is NOT a number that it changes the color of the TextBox to Yellow.
Currently if the entry is not numeric it just clears the cell and that part is good, but I want the color to flag that the user TRIED to put something there.
I'm doing this as a sub-Function since I need to use this check about 20-25 times.
I have a workbook with 31 sheets. Each sheet has 15 textbox button that call macros.
I would like to hide 1 textbox on all sheets until another macro is called. I know how to get the textbox names to be able to hide them, But because these text boxes were copied most of the are the same name, however on severl sheets they are different names "Textbox 4 on most sheets but it could be textbox 34 on others. The ones I want to hide all have the same text label. Is it possible to get VBA to return the label text.
I have a Textbox on a Userform that allows users to enter text and code copies the text to a nominated cell on a sheet. My difficulty is that when the text is copied to the cell at the end of each line of text there is a small 'open square' symbol that I would prefer not to show. I can manually delete the symbol but would like it either not to appear of be able to automatically delete it. If I copy the text to a word file the symbols do not appear.
Private Sub CommandButton1_Click()
Sheets("Marketing").Range("b4") = UserForm1.TextBox1
Me.Hide
End Sub
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies View RelatedI have a userform which I enter details into and it inserts it the information into the next blank row and offsets the first two columns as they update automatically. Is there a simple way of having a textbox in the userform that shows the contents of the 1st column of that next blank row in the userform.
My userform uses the following code to find the next blank row.
'find first empty row in database
iRow = ws.Cells(Rows.Count, 3) _
.End(xlUp).Offset(1, 0).Row
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
Looking for a macro to insert a textbox with the textbox containing a formula rather then text.
Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub
I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....
I have a form that has three fields (1. Comments (TEXT), 2. Legacy_Comments (TEXT), 3, Comment date (DATE))
Now my users need to keep adding comments to the comment text box, and when they do it automatically adds the date they entered the comment in the Comment date box. Now my problem is that since they keep adding comments to the comment box, I need to keep track of these comments in the Legacy_Comments (Text box).
For example, the First time a user enters a comment into the (1) comment text box it auto populates the date in the comment date box, and then adds the comment and date to the Legacy_Comment box. the end result is (comment,4/3/2014 now lets say a user needs to add a comment to the comments box tomorrow - I want the legacy_Comment box to then read (comment, 4/3/2014; comment2, 4/4/2014, ...., comment(n),date(n)) OR it can be vice-verse, because I just need to keep track of the comments, I am not worried if the new comments are before or after older (yesterdays / the day before yesterdays comments)
How can I write a VBA code that will always add the new comment to the legacy_comment field, without deleting the comments that were entered previously?
Code:
If isnull(me.comment.value) Then
Exit Sub
ElseIf me.comment.value = true Then
me.comment_date.value = date
me.legacy_comment.value = me.comment.value & "," & me.comment_date.value & ";"
me.legacy_comment.value = me.legacy_comment.value & "," & me.comment_date.value & ";"
It adds the comment only the first time, but it does not concatenate the string from yesterday to the string to today. I do not care which order the comments are, meaning if I added a comment today it can be before OR after the comment from yesterday.