I have created a group of textboxes from the Control Toolbox used to enter data into a hidden worksheet. I used the Keydown Event to Run a procedure and hide the textboxes. After setting the Visible Property of each control to false, the image of the last active textbox remains on the screen until the worksheet is scrolled. The image then disappears.
I have sheet1 and have textbox5
I want it to be visible if Range J17=25 or else it remains hidden.
I am trying this way but it will not work.
I have the following code written to check calculations. Now I would like to make one or another Label Visible depending on the value this code returns.
If TextBox57 = 0 then I want Label 7 to visible but if it doesn't I need Label 8 to be visible. I am starting both Labels hidden.
I have set the "Scrollbars" attribute to a text box within a form to "2 -
frmScrollBarsVertical" -- and i want the TextBox to be Disabled (so wrote the code as TextBox.Enabled = False) the issue is that when the form is initiated, the
scroll bar doesn't appear and i am missing the Text.
What command I would use to change the text box border color, and set text border to visible or hidden?
View 3 Replies View RelatedNeed to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
View 3 Replies View RelatedI am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I have many checkboxes (1 to 26) that I want visible or not, based on whether the cell states "n/a" (are in a column in a different worksheet). Rather than writing this code multiple times, I'm looking to condense the code.
[Code] .....
I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...
Product
F1020
F1023
F1025
F1120
F1123
F1125
[code].....
Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden
I WANT TO COPY ROWS COMING UNDER COLUMNS
F1120
F1123
F1125
TO
F1020
F1023
F1025
when i use the code
Selection.SpecialCells(xlCellTypeVisible).Copy
i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025
Tried this in a frantic effort
Selection.SpecialCells(xlCellTypeVisible).PasteSpecial xlValues
But got an error for " multiple selection"
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies View RelatedCode:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
Looking for a macro to insert a textbox with the textbox containing a formula rather then text.
Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub
I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....
I have a form that has three fields (1. Comments (TEXT), 2. Legacy_Comments (TEXT), 3, Comment date (DATE))
Now my users need to keep adding comments to the comment text box, and when they do it automatically adds the date they entered the comment in the Comment date box. Now my problem is that since they keep adding comments to the comment box, I need to keep track of these comments in the Legacy_Comments (Text box).
For example, the First time a user enters a comment into the (1) comment text box it auto populates the date in the comment date box, and then adds the comment and date to the Legacy_Comment box. the end result is (comment,4/3/2014 now lets say a user needs to add a comment to the comments box tomorrow - I want the legacy_Comment box to then read (comment, 4/3/2014; comment2, 4/4/2014, ...., comment(n),date(n)) OR it can be vice-verse, because I just need to keep track of the comments, I am not worried if the new comments are before or after older (yesterdays / the day before yesterdays comments)
How can I write a VBA code that will always add the new comment to the legacy_comment field, without deleting the comments that were entered previously?
Code:
If isnull(me.comment.value) Then
Exit Sub
ElseIf me.comment.value = true Then
me.comment_date.value = date
me.legacy_comment.value = me.comment.value & "," & me.comment_date.value & ";"
me.legacy_comment.value = me.legacy_comment.value & "," & me.comment_date.value & ";"
It adds the comment only the first time, but it does not concatenate the string from yesterday to the string to today. I do not care which order the comments are, meaning if I added a comment today it can be before OR after the comment from yesterday.
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies View RelatedI have a two-page multipage form. I have a textbox on page 1 (txtOccupantLoad), and I want to pass the value from that textbox to another textbox (txtOccLoad_L1) on page 2. The code I've tried so far looks like this:
Private Sub cmbChooseLevel_Change()
If Me.cmbChooseLevel.Value = "Level 1" Then
Me.txtOccLoad_L1.Value = Me.txtOccupantLoad.Value
End If
End Sub
What I'm trying to do is to use the same form for 10 different levels (floors) of a building. Then on page 2, I'll itemize the values for each floor. So the combobox determines which floor the calculations are for; txtOccupantLoad is the total of all incremental occupant loads on that floor; and txtOccLoad_L1 is the first of a series of textboxes on page 2 where the value for Level 1 should go. If the combo box shows "Level 2" then I'll write new code for the txtOccLoad_L2, and so on. I've also tried including "page1." and "page2." after "me."
I am trying to create a user form that has a series of text boxes that will all have a VLOOKUP function in them based off of input from a the first text box. If I can just get the code for the first one, I think I can figure out the rest. We will say that the file that the user form is contained in is 'Agent Administration' and the file that I want the VLOOKUP to pull from is called ' Roster for Auto Population'.
View 7 Replies View RelatedEvery time i do a filter and copy a data. Keep the filter on and past in another column. The data does not copy just into the visible cells. It pretend the filter is not there.
I have tried selecting only vible cells when copying and pasting into cells by selecting only visible cells but does not seem to work. Get the error message "command cannot be used on multiple section". There must be a solution but looked on the web and really cannot find one.
Table below so i filter out the "a" so i just have numbers then want to past into vible cells.
CopyPaste ResultsResults wanted
111
a2
232
a4
33
a
44
I have attached my file.
When the Go button in text box in the 'VSVA-1 Data' tab is pressed, a new tab is created. I would like the tab to be renamed after the text that is entered into the text box. Is this possible? Here is what I have so far.
VB:
Sub RenameTab()
'Renames the worksheet tab
ActiveWorkbook.Sheets("VSVA-1 Data").Select
tabName = TextBox1
ActiveWorkbook.Sheets("VSVA Data").Select
Selection.Name = tabName
End Sub
I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value
I'm having trouble referencing a value entered in one textbox to another textbox.
View 2 Replies View RelatedI have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”.
I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.
In a userform I have 2 textboxes date1 and date2 (data from calendar1 userform2). I want date2 always to be higher than date1.
View 7 Replies View RelatedI have a table of data with a filter on the top and a sum total at the bottom. Whenever i filter the list the total at the bottom doesnt change. how do i change it so the sum only calculates the visible cells?
View 3 Replies View RelatedI have a workbook that is set to show a form on startup and then the code tells excel to be visible = false. How ever i have disabled the close button on my form therefore i have stuffed my program up and cant edit it at all.
View 3 Replies View RelatedI have an autofiltered sheet, on which I need to find the last visible row (all columns have the same # of rows in use). I am trying to use:
View 4 Replies View RelatedI have a large spreadsheet that I am using multiple drop downs in to sort for
different scenarios. I do not want to use the general data subtotal command
but each time I sort I want to get a total for the visible cells -