This is about the attached sheet where I have a command button and I would like to have the below results.
When the command button "Calculate" is pressed then
Using the amount from col "G" and the reduction from col "H" in the amount in col "A" and the reduction in col "B" for all the lines.
Identfy the lowest value in col "A" -greater than zero- along with the related duration to be placed in the corrosponding columns "I" and "J"
I have 40000 rows filling with data from column a to g, autofilter is alway on on said columns , the problem is that when I select any column to filter data as per my query , it takes long time to display result and sometimes it hangs with the msg xyz workbook is not responding.
View 9 Replies View RelatedWhat is the best way to name / order worksheets in a workbook to improve load / calculation speed?
View 13 Replies View RelatedExample: I have Sheet 2 set to autocalculate on activate using vb. So when you click on that tab "Sheet 2" it will autocalculate.
My Question is, I have another macro that is copying information between Sheet 1 and Sheet 2. And I don't want calculation to occur during the macro but since it has to select Sheet 2 it performs the autocalculate. Do I have any options to prevent the calculation from occuring when I run my copy paste macro? I only want it to autocalculate when the user selects sheet 2
Can I set up my workbook so that the formula Auto Calculation works on one of the sheets, but the other two sheets only calculate on saves.
I have three sheets in a workbook. 1 of the sheets is used for data entry and there are quick small visual formulas on that sheet that make data entry easier and produce mistake double checks. But the other two sheets are formula intensive and take a few minutes to calculate which is fine considering it only calculates on save. But I need to be able to have the one sheet calculate automatically while these other two are only on save.
how to further formulate wages calculation.
I made a time sheet which calculates number of hours worked and so on. Now I would like it to calculate the wages as well. The problem is that there is a higher payment for nights.
- $16 per hour on regular hours
- $24 per hour from 23:00 to 07:00
How can I formulate it that I get the total payment taking into consideration nights?
Is there any way to automate the calculation of a single sheet? IE to calculate when moving from cell to cell after entering data without calculating the whole workbook and any other open workbooks.
View 9 Replies View RelatedI use VBA's WorkSheet_Calculate event to detect when a cell of particular interest calculates to a specified value. It works well as long as there is only one worksheet (tab). However, when I duplicate that tab (and the final app could have up to 10 copies) to run a different set of data concurrently, I get bad results. The data is online, real time trading data, with each selected stock being tracked in a different tab.
Apparently both (or all) tabs in the workbook react to the same event, whereas I would assume that the event routine in each tab would react only to a calculation in that tab. If this is in fact the case, is there a way to a) make the event routine in each tab respond only to a calculation in that tab, or b) upon a calc event anywhere, determine which tab it occurred in?
Here is the present event code; right now it reads exactly the same in every tab. As long as nothing is happening in any other tab, it does its job correctly.
Attempting to calculate assignment hours based on three fields -
A - Date
B - Txt
c- Txt
D - Time [Start]
E - Time [END]
F - Number [Off]
G - Number [Travel]
H- Number (Calculated Total Project Hours)
I HAVE THE CALCULATION WORKING WITH THIS FORMULA
=(E5-D5)*1440/60-F5+G5
My goal [If Activity is NOT NULL and Start Time is NULL] Time would Default to 8.0 - ELSE use the formula to calculate [ Some projects I don't have a set start/end - and default to 8.0 hrs.
I have a large XLS file will a lot of volatile functions (offsets & sumproducts) and I've recently had to add a sheet, making it even bigger. I have a problem that previously occured occasionally but now it happens consistently. Every time the workbook is recalculated, the Excel window is repainted with partial overlays of every visible worksheet. The result is a visual mess. The window's appearance is fixed by doing anything that forces Excel to repaint again, like clicking to another sheet and back. But it has become next to impossible to enter data with automatic calculation turned on.
ScreenUpdating is turned off when my macros run and besides that, I'm not doing anything with worksheet calculation events. I do have a Workbook_SheetChange event subroutine, but that is run *after* the recalculation so it's not the cause.
The problem occurs only when macros are enabled. If I disable macros, Excel behaves normally.
I have two Excel installations and the problem is happening only in Excel 2007 under Vista. It doesn't happen under my Excel 2003 on XP, though I think it may be happening to others with 2003 & XP.
I am having trouble copying and pasting the results of a calculation on one sheet to another sheet. I believe my problem is that my destination cell is actually two cells merged so the destination is obviously not the same size as the source. Here is the section of code I am working on:
Code:
Sub CalculateDeviceFailureTimes()
'
' Used to manipulate the UEM data file to find the outage times of different devices in the Astro System
'
Dim Output As Integer
[Code] .......
Like I said the section after the initial 'If' works and 0:00:00 is entered into the cell D15 with no issue. My problem comes when I try to copy the result of the formula in 'G3' to 'D15'. Like I said I believe my problem is that 'G3' is a single cell and 'D15' is two cells merged..
Here is what I have:
A B C D
Date ReceivedApproved DateDenied DateTurn Time
1/1/14 1/13/14 9
Turntime is calculated with this formula:
=IF(A4<>"",IF(COUNT(B3,C3),NETWORKDAYS(A3,IF(B3<>"",B3,C3)),""),"")
What I need is to not count the first day it is received in the calculation for the Turn Time. So in this instance I need the Turn Time to say 8 instead of 9. If I just subtract a 1 then I get an error if the Approved Date or the Denied Date are not filled in yet.
I'm trying to collate data from two sheets (sheet1 & 3) , paste it on sheet5 and do some calc. But the macro keeps copying the same row after 2 iterations. Also the find function stops working after 1st iteration. Not sure what to do
Sub Macro17()
'
' Macro17 Macro
'
'
Sheets("Sheet1").Select
Range("B3:L3").Select
Do Until Selection.Row = 10000
Selection.Copy
[Code] .........
I have Excel 2003 and use the following code for 50 consecutive columns, using each column's Row 1 as the multiplier. Each column has over 20,000 rows. It works, but I'd like to know if there's a quicker and / or neater way to do it.
Code:
Range("bo1").Copy
Range("bo2", Range("bo" & Rows.Count).End(xlUp)).Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlMultiply
Range("bp1").Copy
Range("bp2", Range("bp" & Rows.Count).End(xlUp)).Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlMultiply
I'm trying to design an if statement that refers to a range of cells on a calculation sheet to perform one calculation on TRUE; another on FALSE
=IF(A22='Calculation Sheet'!A27:A36,B22*100/16,B22*100/8)
When I view the formula in Function Arguments window, Value_if_true = 1043.75 & Value_if_false = 2087.5 <- these are correct
IF Func Arg.jpg
When I view the cell in the spreadsheet, system displays #VALUE!
When I view Evaluate Formula window, it seems Excel doesn't like the text.
IF Form Eval.jpg
I have a form for calculating costs of products ordered which imports quantity and descriptions from another sheet. The imported info and basic calculation of appropriate cost based on ordered quantity seems to work okay. These formulas are as follows:
First column: =IF(ORDER!A5>0, ORDER!A5, "") inserts the quantity ordered
Second Column: =IF(ORDER!A5>0, "Part Description and Part Number", "") inserts the product description
Both those formulas return a blank cell if nothing is ordered. Then using an outlying cell (G3) I enter the following formula to determine appropriate cost based on total order quantity e.g. $2.57ea if total ordered quantity is less than 50 and $2.37 if total quantity is greater than 50.. {Q: How do I put a third pricing level in here??}
=IF(SUM(A5:A27)>50,"$2.57","$2.37")................
I'm working on a dynamic payroll spreadsheet that will automatically calculate the overtime worked in a week. Right now, I'm running into a snag. My issue is with the formula in Column R. Right now, as shown below, it is doing the calculation based on regular hours minus 40 to determine the OT time. The snag is very messy and it lay in this: while the row by row calculations for total overtime worked for the week is correct, the sum at the bottom is very much off. I need an accurate method to sum the hours of overtime for the given column.
Here are the guidelines for the pay periods and overtime:
1. The pay periods for the month go from the 1st to the 15th and the 16th to EOM (End of Month). This means that the pay period could end on any given day of the week. More on this in a moment.
2. A work week is defined as Sunday to Saturday.
3. Overtime is calculated based on the rule of anything over 40 hours in a given work week.
4. Holiday hours worked do not count towards the 40 hour mark in granting overtime since Holiday pay is automatically overtime.
If it were just a matter of a bi-weekly (every 2 weeks) pay period, I would simply state =IF(weekday(DATE)=7,Hours_Worked - 40,0), and tag a SUM(range) at the bottom. Unfortunately, with it being a semi-monthly (twice a month), the end of the pay period could be a Wednesday, so a reference to day of the week won't work unless the formula can dynamically determine which set of data to evaluate.
I'm completely willing to toss out the current method of determining overtime. This is the calculations sheet that references a cleanly formatted and designed time card on a tab called "Time Card", so this isn't the full workbook. In fact, once the whole thing is done, this calculation sheet will be hidden.
Columns M and N (which are formula referenced in Column P) are basic End - Start calculations and were hidden to simplify the display as well as the number of formulas displayed.
Column L (formula referenced) is a Yes/No display for if the date in question is holiday pay.
Excel 2003
H
I
O
P
Q
R
S
1
Start Work
Time Out
Day Count
[code].....
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
I have an expense workbook (Data) with 4 columns (ID, Item, Cost, Date). I would like to create macros that will generate 3 different reports and write to 3 different worksheets.
The first report is sorted and sum up the cost for each item. Please see the worksheet "Item".
The second report is sorted and sum up the cost for each part ID. Please see the worksheet "ID".
The third report is the cost for each month and Year-to-Date cost right next to it. Please see worksheet "Summary".
write the macros for each of these reports assuming that we don't know the number of rows in the "Data" worksheet.
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies View RelatedIn sheet 1 i have the data like this
Date Amount
---------------------------
13-Mar-13
---------------------------
20-Mar-13 2000
---------------------------
27-Mar-13
---------------------------
[code]...
now in sheet 2 i need the date and amount fields in which amount is present.
i need sheet 2 like this
Date Amount
-----------------------------
20-Mar-13 2000
-----------------------------
3-Apr-13 3000
2.jpg
i'm having in excel- I'm looking to populate rows in 2nd tab based on the data entered in the 1st tab. The rows to be populated in the 2nd tab resides in the 3rd tab. So a match has to be made on the data entered in the 1st tab. When a match is found on the 3rd tab then the corresponding rows from the 3rd tab should be listed on the 2nd tab.
I have an example.xls attached for clarity.
example.xls
i have two sheets, one to display results (Reults tab) & the other tab containing the data (Data tab)
what i am trying to do is some how create a search function and have a forumula which contains a LIKE function that looks up the data table
RANGE = Data!A2:K255
the search needs to lookup the primary column Data!B2:B255 ... if any results are found .. show them on the results tab.. and if multiple results are found, display those as well.. (in either instance, the whole row of information in respect to the results need to be dislayed and hopefully no duplicates are found .. eg, Data!A:K of a hit)
is there a formula that can achieve this? oh, the search is TEXT based and there should be no empty cells within the dataset
after some MASSIVE googling, i have stumbled accross this
B1 = Search box (txt field)
A6 (which will be a hidden column) contains =MATCH($B$1,Data!A2:A255,0). this formula provides the first instance of the result and provides the row number
A7 contains =MATCH($B$1,OFFSET(Data!$A$1,A6+1,0,8-(A6+1),1),0)+A6.
this is supposed to look for the next row number which contains a match and provide that row number
and througout my other columns, i have
B6=OFFSET(Data!$A$1,A6,1)
B7=OFFSET(Data!$A$1,A6,2)
B8=OFFSET(Data!$A$1,A6,3)
and so on
2 things i cannot recitify..
1, the match has to be EXACT ... unfortunately i cannot use exact .. needs to be LIKE .. eg, i cant use the search word "boat" as the range of data has "boats"
2, it comes up with multile .. irrelevent results.
I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
View 9 Replies View Relatedmake a calculation(addition) and use the answer to multiply against another addition calculation....
The sum of (Monday!A1:A4) multiplied by the sum of (Monday!B1:B4) plus (Tuesday!A1:A4) multiplied by the sum of (Tuesday!B1:B4) and so on.
Possible to look up a value from one excel sheet in another sheet and then return multiple values in the first sheet
For example the following is a sample of sheet 1
NSV Code
Item
12
OLANZAPINE
54
ROPINIROLE
And the following a sample of sheet 2 :
Nsvcode
Item
Division
Speciality
Qty
12
OLANZAPINE
CLINICAL
CS
10
[Code] .....
I want to lookUp the NSVCode from sheet 1 in sheet 2 and return the speciality and qty values in sheet 1 as sheet 2 contains a lot of info I do not require and sheet one also contains various pricing calculations I also require.
The last few days I have been trying to figure this out with no luck whatsoever. I am using Excel 2010 32-bit with power query on a Windows 7 64-bit computer. I was going the use the html creator, but the dl link was down and I had to use screenshots.
I have a sheet titled "LeadSheet" that contains multiple data blocks of information (around 20). I have attached 2 examples of these data blocks and 2 examples of results needed below. I tried to create them so they would fill in the gaps of my explanation.
All of these data blocks are 7 columns wide and vary in row size from 10-250. The blocks of data all have titles on the 5th row, but are not headers, and then data beginning directly underneath. I hesitate calling them ranges because I only selected one data block as a range and named it "lead1" and then stopped not knowing if I was headed the right direction.
I first tried to create a table out of the range, but was unable to do so because the "Name" column is an array. The phone and address columns are populated by VLOOKUP. And although the images show the column names as the same for name, phone and address theyare actually different, like name-firm1, name-firm17,address-firmxyz, etc, etc. I not putting that in the images. The "Option 1", "Option 2", "Option 3" and "Option 4" columns are generated using a =IF formula.
I have another sheet titled "ResultsSheet".I'm needing a way or code to copy entire rows from the multiple data blocks/ranges in the "LeadSheet", and paste it in the"ResultsSheet", based on any value occurring in any of the"Option" columns within the individual data blocks/ranges along with appending the "Option #" title to either end of the copied row.
The "LeadSheet" is constantly being updated so information is being added and taken off all the time. That being said, is there anyway to make it update as soon as the "LeadSheet" does or on a timed interval so that the"ResultsSheet" is always up to date. And also prevent it from continuing to re-copy over duplicates of information that has not changed?
Ifthe "Option #" result is the exact same percentage then the order does not matter between them.
Ifwithin the same data block/range both "Option" columns have data it is usually because of some error and is most likely bad datathat does not need to be copied. i.e. "Steven Seagal". If that makes this task much more difficult I can live with it.
If within two or more different data blocks/ranges the same name and info appears that if fine because the "Option #" will always be different. i.e. "Chuck Norris".
I am also trying to make the "ResultSheet" ordered from largest percentage to lowest, but I assume that should be done once the data is on the "ResultsSheet". No headers or titles are necessary on the "ResultsSheet"
Data Block example 1:
Data Block example 2:
Is it possible to make multple worksheets from a selection of multiple cells?
This would mean a selection of 10 cells would generate 10 sheets titled with the cell conent.
I've workbook contain Sheets 2716 having same column heading data in each sheet in 1st Row, also having some columns blank in between these heading so can you give me solution on it on the basis of column heading names below data in single sheet of all these sheets data.
Heading names as below
Product Name
Amount
sr no
DS
TS
Description
Qty