Multiple Conditional Format Changes As A SubFunction To TextBox-Exit() Event
Mar 31, 2009
What I want to do is have a sub-Function that will check to make sure what is entered into a TextBox is a number, and if it is NOT a number that it changes the color of the TextBox to Yellow.
Currently if the entry is not numeric it just clears the cell and that part is good, but I want the color to flag that the user TRIED to put something there.
I'm doing this as a sub-Function since I need to use this check about 20-25 times.
View 6 Replies
ADVERTISEMENT
Feb 2, 2010
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
View 11 Replies
View Related
Jul 26, 2013
Say I have a userform with one textbox and one commandbutton labeled �Cancel�. The textbox has an exit event to edit the data entered to the textbox. The commandbutton has code to unload the form.
The first time the Cancel button is clicked and the textbox has the focus the exit event of the textbox is triggered, but the form is not unloaded.
The second time the Cancel button is clicked the form is unloaded because the textbox no longer has focus.
How can I suppress the exit event from being triggered when the Cancel button is clicked if the textbox has focus?
View 8 Replies
View Related
Dec 12, 2008
I have a Userform with a textbox1 and a commandbutton. TextBox1 triggers a code on the exit event. CommandButton1 simply unloads the UserForm. If a user enters data in the textbox, but does not exit and instead clicks the commandbutton to unload the UserForm, the exit event code is still triggered and then for some reason the commandbutton no longer responds to being clicked. I can't seem to find a way around this.
If the commandbutton is clicked, I simply want the UserForm to be unloaded and the exit event for the textbox ignored
View 9 Replies
View Related
Feb 15, 2013
I am using a Textbox1_Exit event that (if certain values are true) sets the focus to different Textbox. However, when I invoke the Textbox3.SetFocus, it redoes all the code in the Textbox1_Exit event since it's technically leaving now.
How do I stop this from happening and ensure that the Exit event happens once? OR How do I properly SetFocus inside an Exit event?
View 8 Replies
View Related
May 20, 2014
I am currently creating a dashboard for my business unit.
I have text boxes in the "Dashboard" worksheet linked to cells in the "Data" worksheet.
I would like the text boxes font color to automatically update based on updates I make to the "Data" worksheet.
Example: 100% of target, font changes to Green. 75% of target, font changes to Yellow. 50% of target, font changes to Red.
View 4 Replies
View Related
Jul 7, 2009
I need to test what control will receive focus after the exit event
this test needs to be in the exit event so i am able to validate and cancel only if focus will be the enter button
Private Sub myTextBox_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If NextControl.Name = "EnterButton" Then
DoMyValidationTest 'and other stuff, such as set TabIndex
Else
'do nothing
End If
End Sub
so what should "NextControl" actualy be???
View 9 Replies
View Related
Oct 22, 2011
I'm having some trouble getting control ENTER & EXIT events to fire properly when having controls embedded on frames within a userform. I'm using Excel 2003, 2007, & 2010. Here's the userforms I'm working with:
With FRAME:
Without FRAME:
In both cases, the DESCRIPTION field is disabled. The selectable controls on both are a combo-box, textbox, listbox, & 2 buttons. On the FRAMED version, the combo-box & textbox are contained on a FRAME.
Here's the code, same on both userforms:
Code:
Option Explicit
Private Sub cmbRecipes_Enter()
ListBox1.AddItem "ENTER - " & cmbRecipes.Value
End Sub
Private Sub cmbRecipes_Exit(ByVal Cancel As MSForms.ReturnBoolean)
ListBox1.AddItem "EXIT - " & cmbRecipes.Value
End Sub
All this is doing is posting a message to the listbox when the combo-box ENTER & EXIT events fire. This works as expected without the FRAME, ENTER is shown when the combo-box is entered and EXIT is shown as focus is moved to another control. But when running it on the FRAMED version all I get is a single ENTER event recorded regardless of how I move the focus through the control set.
Another oddity is that if I have more than 1 control that can receive focus on the FRAMED version, it appears to work correctly.
View 6 Replies
View Related
Jun 12, 2007
i have this userform which has 20 textboxes. these boxes are used for numbers only. however, i want my numbers, as i type them, to appear in the boxes with thousands separators. even if i don't type the commas, the numbers will be formatted as if i typed them with such. Do i have to format the textboxes one by one for the formatting that I want or there are codes that could be used for all these textboxes?
View 9 Replies
View Related
Feb 12, 2010
Need multiple conditional format for more than 3 condition. I don't know how to write code in VBA.
View 5 Replies
View Related
May 21, 2008
In a workbook I have
Sheet 1 and Sheet 1a
1a is used to provide a start and finish date for a task - there are many of them
The following is located in a cell in sheet 1 which looks at 1a for the dates etc
HTML =IF(AND($A$427+B$430-1>='1a'!E10,$A$427+B$430-1<='1a'!I10,B$429<>"S"),"X","")
The end result is an X located in the respective feilds.
This works fine but.
I have set up the Calendar area in 1 so that when the X is shown it is Red.
The sheet also shows a Blank in both the SS [Sat and Sun]
What I would like to do is to have instead of the blank in the SS [Sat & Sun] a shaded grey which would clearly indicate that this was weekend.
What I am after is the weekdays with the X as now and the weekend only in a grey shade as it is at the moment without the X
View 14 Replies
View Related
Oct 9, 2011
When I input in cell D3 with 1 and E3 with 7 or below, the cell of E3 will be red color. when I input in cell D3 with 1 and E3 with 8 and above, the cell of E3 will be green. When I input in cell D3 with 2 and E3 with 15 and below, the cell of E3 will be red color. when I input in cell D3 with 2 and E3 with 16 and above the cell of E3 will be green.
View 1 Replies
View Related
Feb 19, 2014
Is it possible to alternate how a condition works over many rows? Say column C has work order numbers eg. C2:C7 shows WO1234, C8:C15 shows WO1235, C16:C25 shows WO1236 and C26:C30 shows WO1237. What I would like to do is have rows 2:7 red, rows 8:15 blue, row 16:25 red, rows 26:30 blue and repeat to end (the range would be column A to column N. Ive used =MOD(ROW(),2) for every second row but am not sure how to get it to look at many rows and alternate as needed.
View 6 Replies
View Related
Aug 10, 2009
I have created a userform but I am having extensive problems with the date formats.
My system is set to UK and short date is set to: DD/MM/YYYY
When I used code to add the values in the userform to the spreadsheet, any that contained a date format would revert to the US format.
So I finally figured out to use DateValue to format it correctly for example: ...
View 2 Replies
View Related
Feb 16, 2010
I have a spreadsheet that requires me to manually hunt down records that match based on several different criteria. this is very time consuming and inefficient. i would like to find a way to highlight certain records that match based on several different fields. i have posted an example spreadsheet that also has a more detailed description of what i am trying to do; which is located in the second sheet.
View 9 Replies
View Related
Apr 24, 2009
I would like to call upon a function until a certain criterion is fullfilled. Then, I would like to have the result returned to me and exit (all) open functions. For value1 = 1 and value2 = 10 I expect value1*value2 = 100. Instead, the routine returnz zero. What is the logical flaw in the code below.
Function testfunction(value1, value2)
If value1 = value2 Then
'Calculating the difference
testfunction = value1 * value2
Exit Function
ElseIf value1 < value2 Then
value1 = value1 + 1
Call testfunction(matrix1, matrix2)
End If
End Function
View 9 Replies
View Related
Jun 12, 2009
A1:A6 have numeric values 1 to 6.
I want the conditional format values to change Based on the value in Cell B2.
If the value in B2 is "old", then I want these conditional format conditions for A1:A6. Numbers between 1-2=green text, 3-4=orange text and 5-6=red text.
IF the value in B2 is "new" then I want the conditional format conditions in A1:A6 to change so 1=black text, 2-3=green text, 4-5=orange text and 6=red text.
I know how to do multiple conditional formats but i have no clue how to change multiple conditions based on another cells value.
View 6 Replies
View Related
Nov 5, 2013
I'm a 2007 user. I am trying to conditional format a range of F1:J10, where F1 will be conditionally formatted relationally to A1. G1 is relational to B1. H2 relational to C2, etc., all the way down to J10 relational to E10. My conditional format formula in cell F1 is >A1*2 (will format F1 as orange). I want to be able to copy the conditional formatting over so the formula in J10 for example would be: >E10*2 (will format it orange).
I omit the "$" in the conditional format formula in an attempt to prevent it from being absolute. But every time I copy the conditional formatting over to the other cells, the formula within those cells remains identical to the formula in the original cell.
View 6 Replies
View Related
Apr 25, 2014
I would like to shade my cell yellow if the priority equals A or A-NEW and ACV=o.
In the data below, items 4 and 13 would be shaded yellow.
I am using Excel 2010.
Priority A, B, C
Consumer UPC
Item Description
ACV Weighted Distribution
[Code] .......
View 8 Replies
View Related
Jul 3, 2014
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
View 3 Replies
View Related
May 17, 2006
I have a MultiPage control that has 67 TextBoxes on it, changes to 14 of these TextBoxes will trigger a public subroutine called TB1Refresh. I have a TextBox and a ComboBox just above the MultiPage control. The ComboBox is set as a MultiColumn. The ComboBox is working. The TextBox is called TB1. The first TextBox on the MultiPage is called TB2. There are no duplicate names on this UserForm. When I scroll though the list in CB1, the values in the TextBoxes on the MultiPage scroll as the they are supposed to. The problem is that every time one of the 14 TextBoxes changes, the subroutine is supposed to fire. Here is the code I use in two of the TextBoxes to fire this sub:
Private Sub TB8_Change()
TB1Refresh
End Sub
Private Sub TB9_Change()
TB1Refresh
End Sub
I put a MsgBox at the beginning and the end of TB1Refresh to see what was happening. They never fired! So the question is, why won't the subroutine fire when called upon to do so. This code was working before I added the MultiPage to this UserForm,
View 2 Replies
View Related
Jul 31, 2014
I have a userform that i have set the showmodal property to false.
This form has a list box that is populated with a huge list of items. I have a textbox in the userform that i use as a filter. so as the user types in something it filters the results in the listbox.
This was working fine but I added to the code to put a tooltip in when hovering over a item in the listbox. (using windows API to achieve).
The problem now is after i type one letter in the text box and it runs the change event it doesnt place the cursor at the end of the textbox anymore to continue typing.
I have tried setting focus to the textbox at the end of the event but nothing happens. I have searched all over the internet with no luck.
View 4 Replies
View Related
Mar 3, 2014
I have attached an example set up with a user form I am building. I currently have the first combo box loading upon the initialize of the user form an from that I choose one of the product types and it gives me a list with all product names associated in the second combo box. Upon a change event in the second combo box I want to populate the 3rd Column with the count of how many of that Product type.
I have a couple different code set ups in the attached sheet and neither works.
CmboBxtoTextbox.xlsm
View 7 Replies
View Related
Oct 1, 2009
I have got some code that is duplacated a few times. It allows only number values to be entered into a textbox.
Is there a way to make a function out of this to cut out the duplication of code.
View 7 Replies
View Related
Feb 14, 2012
I create a series of labels and text boxes at runtime.
Code:
for x = 1 to 10
labelName = "label" & x
Set cControlLabel = Me.frameScrollable.Controls.Add("Forms.Label.1", labelName, True)
next x
How can I assign an on_click event to these? I have seen some rather complicated suggestions such as creating code for each possible object, but there could possibly be hundreds of labels created. It would be nice to be able to call the same macro from each label click, and then take action based on the .caption property of the label.
View 7 Replies
View Related
Feb 16, 2014
filling a textbox from a cell using a label click event. I have attached an example.
View 2 Replies
View Related
Aug 26, 2007
I have a textbox from the drawing toolbar. When someone changes a cell then clicks in the textbox, Worksheet_Change does not run. If they double click in the cell, that's OK I can capture that event and protect the sheet, stopping them clicking in it. But if they just start typing in the cell, I can't capture that. I have seen some API code which captures keypresses, but it is not practical to use as it loops repeatedly. I could lock the textbox and have the user do something to unlock it, but this is a last resort.
View 7 Replies
View Related
Jun 10, 2014
As part of a program I'm writing in VBA (for Excel 2010), I have a textbox in a user form used as an interface to write a formula in cells in Excel.The resulting value of a formula from a cell is loaded up into the textbox. It would be shown in the textbox like "See 1.2 and 1.3" where the formula in the cell is
[Code].....
This is just used as an example but the principle is there. It is worth noting that I’m writing this for very inexperienced Excel users but I need them to be able to edit the string part of the formula without breaking the formula.
However where I’m struggling is to pick up a selection change event inside a text box already selected. I need to be able to check if the textbox.SelStart is within an address value or within the string in the textbox.
The event Enter won’t work if the user is already editing the textbox (i.e. typing stuff) and then clicking or using the keyboard arrow to move the cursor somewhere else inside the textbox. I don’t think the event Change is the solution either as it would mean that the user would have already typed something and as a result the formula may already be broken.
I have had a good look around and I didn’t find an event for a selection change inside a textbox. Does it exists and/or is there a way that would have the same result?
View 7 Replies
View Related
Dec 19, 2006
I have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
View 9 Replies
View Related
Jul 10, 2012
I am trying to find a efficient solution to convert 3 lists (in the same column layouts) to a calender format. I have different lists that are maintained but want to consolidate them into one calender. So rather than looking at 3 individual lists, someone can view this one master calender with all the events/meetings.
The events from each list would automatically populate one master calender.
List 1: Abe
Event Date__Discription
1/20/2012__Lunch meeting
3/2/2012__Convention meeting
5/11/2012__Dinner meeting
List 2: Bill
Event Date__Discription
1/4/2012__Office Meeting
6/2/2012__Golf meeeting
[code]....
Is there an existing program or file out that can accomplish?
View 1 Replies
View Related
