I have two name/address lists in separate Excel workbooks. I need to merge and eliminate duplicates by name. One has single name field in format "Lastname, Firstname". The other has a single name field in "normal" format (First and last name). Ultimately I need to end up with two name fields, First and Last, and this I can do.
The problem is in identifying any possible duplicates between the two lists. Why? Because the first list will have names like "Smith, Robert" and occasionally maybe "Smith, Robert J.". The second list will have names like "Dr. Robert J. Smith Jr. PhD", as well as possibly "Robert Smith" or "Dr. Robert Smith".
Using Text-to-Columns will still require a lot of reworking, because the last name won't always be in the same column, depending on whether there's a Dr. or Mr. or middle initial and so forth.
I've looked into the LIKE( ) function which holds some scant hope, but I don't think it will happen for me either.
How I could compare "Robert Smith" to "Robert J. Smith" or "Dr. Robert Smith" or "Dr. Robert J. Smith Jr. Phd"? Imagine all names in column A.
I have one worksheet in my job named "Tudo" and there I have about 100 rules and the name of employees that need to follow these rules. What I need is the worksheet named "Nomes com Regras" show me in each name which rules is for each person.
I have 2 excel files. 1 has 10 columns and about 20.000 rows. Each row is a customer entry and each column specifies data about the customer (column 1 first name, column 2 last name, column 3 email, column 4 city and so on). The 2nd excel file only contains 1 column with 4000 email addresses in it. These are email addresses of people who opted out of our newsletter and other marketing channels.
Now I want to have excel delete all the rows of the first file that correspond to the email addresses of the 2nd file. Obviously the email addresses in both files are identical, though the 2nd one contains fewer entries and only those people we don't want to continue sending emails to.
I am working on an email marketing project and i have a small problem. I have two different email list. One (List A) is a large list of potential leads. The other (List B) is a list of leads we are not supposed to market to. I need to delete every lead on List A whose email address is also in List B, so that we do not send unwanted emails to our clients.
The best way i have to do this so far is to go through line by line, which is very impractical.
In case it matters here is out list format. Each list has 10,000 + leads. Each lead occupies a row. The row stretches across 13 columns and each column holds a different variable about the lead (names, state, email address).
I am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
Assume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
On a worksheet called "Contact Info" column A starting in row 2 I have a list of names (variable length). In Columns B2-D I need the email address, work phone number, and cell phone number.
In short, I would like a pivot table to only count unique values, but when I click into the pivot I would like to show all instances of that value. For example:
I have a table of data that I am creating a pivot table from. There are fields for Customer ID, Task Name, Age, and Notes. There will be multiple records for a single Customer ID each time it has new notes.
I would like to create a pivot table that has Task Name in the Row Labels, Age in the Column Labels, and count of Customer ID in the Values, so that, for example, I can see how many accounts have been in the Design task for 2 days. However, when I do this it counts each record, but I would like it to count each unique Customer ID. Also, when I click into the pivot, instead of pulling up one line per Customer ID, I would like it to pull up each instance of Customer IDs in that Task Name/Age combination (similar to doing a DISTINCT in SQL).
I have a list of isometric drawing numbers ending with a [underscore]weld number e.g. 1692-SG-0040-04_05.
Some welds are repaired--in that scenario the amended weld number will be 1692-SG-0040-04_05R1, and even 1692-SG-0040-04_05R2 if repaired for a second time.
On occasion a weld may be cut out entirely and a new weld done. The weld number for that will be 6317-FG-1690-02_06C1.
And here's a wrinkle I've just verified...a cut weld may also be repaired so the weld number will look like 1698-SG-0077-01_04C1R1.
Is there a formula to count these as one weld: 1692-SG-0040-04_05 1692-SG-0040-04_05R1 1692-SG-0040-04_05R2
This as one weld: 6317-FG-1690-02_06 6317-FG-1690-02_06C1 6317-FG-1690-02_06C2
...and this as one weld: 1698-SG-0077-01_04 1698-SG-0077-01_04C1 1698-SG-0077-01_04C1R1
I am having trouble creating a function to count duplicates of duplicates.
An example of the data table 1 is:
Product 1 2nd Product 1 2nd Product 1 New Product 1 New Product 1 Flt Product 2 2nd Product 2 New Product 2 New Product 2 Flt Product 2 Flt Product 3 2nd Product 3 2nd Product 3 2nd Product 3 New Product 3 Flt
I created a new table (table 2) and made a list of all the Products on table 1 and removed the duplicates. I now have 3 columns with titles New, 2nd and Flt as follows:
New 2nd Flt Product 1 XX XX XX Product 2 XX XX XX Product 3 XX XX XX
I am trying to count the duplicates for each product (XX), but I can't seem to work it out. I've tried the MS help function, but unsure of the actual formula I need to be using.
Trying to write a script to carry out a number of tasks but is there code to enable an Excel to look in a particular file for the list of csv files - carry out the tasks and return the appropriate values in the Excel sheet whilst leaving the original csv files untouched?
Need a way to update a single master file. What happens right now is that the cost manager sends out one file to a lot of different project heads and then on having them return back to him he basically has to individually add in all the data. What i am trying to do is that he somehow carries on sending out the data as there are a lottt of projects and then on returning them they automatically update.
how I can loop through folders to select files starting with a certain word and copy all of them to a different folder and rename them. The folder structure is given below
Company 1(parent folder) North South East(sub folder) West(sub folder) Jan Feb Mar.... Dec Jan Feb Mar.... Dec Jan Feb Mar.... Dec Jan Feb Mar.... Dec
In the above structure, the files are present inside each folders Jan, feb...Dec under the regions North, South East n west. note that I have to select files starting with "Sales" and copy them into a new folder(say results) and rename copied files as Sales1.xls, Sales2.xls etc. (Files are not present in the folder company1, north, south, east and east.)
I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1 While DoIt = 1 Open "C:TempList.txt" for output as #1 Print #1, Files In Folder Close #1
Open "C:TempList.txt" for input as #2 while not eof(2) Line input #2, MyFile Display MyFile on screen Wait for 30 seconds Close MyFile and MyApplication that opened it wend Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
I'm using the following code to import thousands of html files into my spreadsheet. The code is working fine. Since I am importing thousands of files, when there is no more space on my worksheet, the code stops with an error message. I want to make this code add another worksheet & continue importing the html files until there are no more files to import.
Sub Master_Importer() Dim I As Long Dim strFilename As String Dim strPath As String strPath = "file:///C:/Documents and Settings/c/Desktop/New Folder/" With Application.FileSearch .LookIn = "C:Documents and SettingscDesktopNew Folder" .FileType = msoFileTypeAllFiles .Execute For I = 1 To .FoundFiles.Count strFilename = Mid(.FoundFiles(I), InStrRev(.FoundFiles(I), "") + 1) With ActiveSheet.QueryTables.Add(Connection:= _ "URL;" & strPath & strFilename _ .......................
I have a excel file that I enter information into. I have code that saves the files to a certain folder with the name, date, and time stamp for the file name. At the end of the day I might have 3 to 15 excel files I have created that day and I would like to take information from certain cells (examle: L3, B6, B7, B8, G8, and so on) and create a txt file with all of the information in it.
Example: 12/20/2007 Your Name 123 Somewhere St. Here, OH 45111 Home Visit
I is it possible to convert all comma separated text files in a single folder in to excel files. But the requirement is to have 2 sheets in each new file. first to be the full file - with all columns, and in the second sheet to keep only colum A B D G H K L M O P R S T V W from the first sheet. The second sheet name must be the same as the first one but without the first "wlist_" in the name.
One more thing. The third column in the second is called "COUL". there are short letters for colors in french
can they be converted with the sort in English like it goes:
NO = B BA = W RG = R SO = P JA = Y BE = L VE = GY GR = G VI = V MA = BR BJ = TA OR = O
Here is a link to the both CSV and an example excel file with the end result. In this example i haven`t change the shorts for the colors. It takes me too much time with the find and replace function. And at the moment i`m really pushed from time.
I have 50 files each with 1000 numbers in column A.
I need to compare every list with every other list and calculate the Pearson function.
I am ok with the vb code to compare every file with everyother.
I can do this by opening each file then closing but it takes too long.
Each of the 50 csv file names is in my destination workbook
I would like to define an array using the file name, then extract 2 lists without opening the files then perform the pearson function and place the value in the destination workbook. (The pearson function just measures the strength of correlation between 2 sets of numbers)
I have a large number of .txt files that are comma separated files (but not saved with the .csv extension) that I need to convert to files with the .csv extension.
Is there an easy way to do this for all files in a given folder? Ideally, the files don't even need to be opened as they are are quite large in size (70MB+) and there are a lot of them (500+).
I have about 100 Excel files in one folder that need to be saved as text files. They can keep the same name, but simply need to be converted to text files. I'd like to use VBA for this and I can't find examples that do exactly that...or ones that my limited knowledge can handle.
Excel files exist in C:Source and ALL of them should be saved as text files in C:Destination. Maybe there is an easier way, but I thought for sure there was a routine I could use.
I have 22 CSV files. I want to search each of those files for a specific text string (ie: "profile" or "description"). When the macro finds the word in any one of the CSV files I want it to copy that complete csv worksheet and paste it into an excel xls file.
how I can go about doing this. Not also that while vlookup is possible, its very time consuming if i have to do this 50 times over and each time the csv files have different file names. that is why i want to search within a file (each file has its own unique identifying text string)
I have the code below. It openes all csv files within a folder, then delete rows depending on the value of a cell. Now it needs to save the file as a xls file ....
I would like to be able to execute a command line that will convert an Excel csv file to an Excel file that is TAB delimited. In other words, replace the comma delimiter with a TAB delimiter without having to open the file in Excel. I am an inexperienced Excel user
Is there a code that will search a pre-determined folder for all .xls files containing the word "Temp", and deleting those files?
Example: In the root of drive M, I have several Excel files. Anytime one of the original tracking logs is opened, a temp file of that log is automatically created. I would like to automatically search the drive and delete all files containin the word "Temp".
I've attached a picture of the directory tree, in case that will help. The file will always be named "PO Response Tracking - Temp#######.xls", with ###### representing a series of either 5 or 6 numbers.
Here I attached a sheet. In this file, in D Column addresses are in one single cell. I need all data in 3 raw, as per I mentioned in Sr. No. (Column A) 518 & 519, I have large no. of data, how can I put all single address in 3 raw.
