I am pulling what hair i have left out of my head, I am a New Desk Officer for a Local Police Dept trying to set up a patrol report sheet, I need to have a return of "Mids", "Days", "Swings" to be displayed in the cell next to the one labeled "Shift" depending on the time of day. IE: 12am-8am = "MIDS", 8am-4pm = "DAYS" 4pm-12pm = "MIDS".
View 10 Replieswhy is that I have the same time value but with different conversion results?
I have values in column A10:A26 with an average time of 00:00:38 result with converted value of 7052.04.
When I type 00:00:38 in Column A30, it gives me a result of 7139.37...
Why do I have different conversion results knowing that I have the same time of 00:00:38?
I Have attached a sample workbook.
I am trying to determine the best way to graphically show the results of a time/work study. Basically i have a list of tasks and each list has 2 sets of numbers assigned to it. One for how much time it takes on a scale of 1-3 and a second for how much value is added for the task, again on a scale of 1-3. I want to show some sort of graph/visual that shows the number of tasks as clusters (not name of task) in maybe quadrants. With the time on X axis and value on Y axis. I am envisioning something like a 9 box that would have low/low to high/high. I can only think to create a 9 box in excel and physically put circles(clusters) in each quadrant.
View 2 Replies View RelatedI have an excel workbook which requires us to enter the log details of some sites and then a report is generated using these logs (report attached) . [URL] .......
I want that excel should automatically identify the site and calculate its outage with the following formula:
Outage %age= Total Outage(min)/100.80
and add it in the respective column while identifying the outage.
e.g. if outage is of power then the calculated %age outage should be pasted in the power outage column in front of the respected site.
e.g. in the sheet attached above the first row in the first sheet states that SKU2326 was down for 50 mins
Now %age outage will be
Outage %age= 50/100.80
Outage %age=0.496
Now as the outage is related to power so this outage should go into power column in sheet number 3 labelled as "Network Total Up time Week#17"
Now the next time SKU2326 becomes down it should be added with this 50 mins and the outage calculated as presented above.
I have a spreadsheet where an engineer is expected to record sample temperatures of water outlets, along with the time he took the sample. Each outlet has a row on the spreadsheet with a column for the Temperature and column for the time. I would like to automatically input the current time(or time and date) on each line as the temperature is entered.
View 4 Replies View RelatedI have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.
Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:
Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3
Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob
So it would work as follows.
Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.
Problem 2
Weekly league rank table that shows position movements week by week
Example.
Week1
1Jon
2Bob
3Fred
Week2
1FredUp 2
2BobNot Moved
3JonDown 2
Can Excel calculate/show the actual movements of league positions?
I have a protected worksheet. Users wish to be able to track changes in the input cells. The suggested approach for this is to temporarily disable sheet protection and allow them to change the font color, then protect afterwards. What I would like to do is:
i) check whether they are in an input cell
ii) if so, then prompt the user with the 'Font Color' dialog box
iii) apply the font color selected to the input cell
I'm struggling to find the dialog box I need. I can launch the one to change the interior color, no problem (Application.Dialogs(xlDialogPatterns).Show). But that's no use to me, I just want a color palette that specifically relates to the Font Color
I have one column with as many as 50,000 or more rows. The data format for each row/ cell is unique as shown below ( date and time). I wanted to split the data as shown in "Formatted Data" below. Have Tried Text To Column formatting but didn't work right.
Raw Data: Formatted Data (2 cells):
2005/11/02 23:55:15.758 ==> 2005/11/02 23:55:15.758
2005/11/02 23:58:16.698 ==> 2005/11/02 23:58:16.698
2005/11/03 00:07:13.830
2005/11/03 00:10:14.971
I am trying to create formula that will show overtime worked in a given day. The code I am using is a simple one ([ cell - 8], for hours worked). The problem is when the time cells are blank/not used it shows a -8 in the cell. what I need to do to create a code that will eliminate the -8 from showing. The cell its self is taking the result from another cell with a formula and then subtracting 8 from the result of the formula in the other cell.
View 2 Replies View RelatedI would like to be able to enter the data into the grey cells and then have the yellow cells auto generate a result. The only problem is that the required value in cell B5 is from when the entered value in B4 is looked up in the table, rounded UP to the next highest value and then the answer from the next cell.
So, if I enter in B4 a value of 500, a lookup is made in the table and the next highest value would be 553 with the correct answer shown in B5 being 13.
I put the formula in cell which adds 2hrs in the current time. Now I want msgbox when the system time=time in cell. I want to do it from vba..
View 5 Replies View RelatedI am looking for a formula to change a condition based on the time of day. Essentially, before 1pm I would like the formula to be:
=((I12/100)*25)/D12
After 1pm I would like the formula to be
=((I12/100)*25)/B12
I tried various ways with "=if(now()> ..." formulas to no avail because of the way Excel handles Now().
I have a Excel Dates & Times column where the time is not always used. In these cases the time is 12:00AM. Is there a way to Custom Formats the cell so that the time is only visible if it is not 12:00AM?
View 6 Replies View RelatedI need a way to compare the time of the computer with the one in the cell and bring up a message box if the time matches.
Yet i don't want it to be a one time makro. What i want is to be able to work with the worksheet and that at the same time i want a paralel function to check whether the time in the cell matches. Something like agenda in Outlook.
I have a problem regarding sorting data having date and also time within a single cell.
Example data (I have written it as code to preserve formatting)
A B C D E F
12/5/2008 02:072/5/2008 06:0128804833363
22/5/2008 18:012/5/2008 18:0599271297
Column B is start date and time whereas Column C is end date and time.
My aim is to cut and paste the whole row automatically to Sheet2 if the time is within 2AM to 8AM else leave as it is.Also I don't know anything about VBA Script.
What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
View 5 Replies View RelatedI need to subtract the time alone as per below example:
Cell A : 2/4/2014 8:58:13 AM
I need in Cell B as : 2/4/2014 8:46:13 AM (Minus 15 minutes)
How to get this?
I have data exported from a defect management tool (that reports all the defects that have been recorded in the defect management system). This data has unique columns for name of originator, defect ID, date originated, priority, etc. The date originated column has the date and time. I want to create a report that tells me how many High, Medium and Low priority defects were created on each date - and I am using a pivot table to do this.
However, because the date column is actually the date and time the defect was reported/recorded, the time element of this is making all the dates unique eg, I have three defects recorded on 29/01/2009, a High priority defect (reported at 29/01/2009 12:23) and two Medium priority defects (reported at 29/01/2009 13:02 and 29/01/2009 13:32). My pivot table is showing each date as a unique date - with a count of 1 against each, whereas I want to see 1 date entry (for 29/01/2009) with a count of 1 against High and 2 against Medium.
I have tried custom formatting the date column to dd/mm/yyyy - which appears to work in the data (but doesn't in the pivot table, because the time stamp is still there, just not visible). I have tried copy and paste special [Values] (on the custom formatted date column) -but the time stamp is still there. I have tried formatting the date column to "General", but this changes the dates to the number format - eg 29/01/2009 12:23 becomes 39842.5166203704.
I have tried inserting a new column and using the =Left function for the first 10 characters of the cell (ie the 29/01/2009), but that gives the first 10 characters of the number form of the date, ie 39842.5166. Basically, without going into every date cell (and I have thousands) and manually deleting all the times, how do I quickly change the date column into just having the date in it (ie how do I strip off the time element)?
I attached my example with this message, I want the cell Z6 for instance to make the sum of the "X" of the same record based on their "weight" in the gray ribbon respectively.
View 3 Replies View RelatedI have the following code would like to have the results from the input box to copied to cell B7, however it is not copying the results.
Private Sub CommandButton1_Click()
'Sub AddSheetTest()
'Replace "Sheet1" with the name of the sheet to be copied.
Dim i As Integer, x As Integer
Dim shtname As String
Dim shtTemp As Worksheet
[code]...
how to take the result of a formula calculated in one cell and show the results in an other cell
View 4 Replies View RelatedJust yesterday when I opened my excel file, all the cells that contains formulas does not display the results (leaving the cell blank).
For example the formula for cell A1 is =B5. But after putting a value in cell B5, cell A1 is still blank.
Is it possible to combine the results from 1 Text Box and 2 Combo Boxes to return to 1 Cell?
For example, i am using this code to write username to Sheet 2
Sheet2.[c9].Value = txtFullName.Value
and this code to write account number to Sheet 2
Sheet2.[d8].Value = txtAccountNumber.Value
BUT - i would really like to take the Value from txtFullName and take the Vaule from txtAccountNumber and combine that into (1 cell only) with space separators please.
Example : (username & account number combined)
Slim 12345678
I have a list of data entries. I use auto-filter, to view them according to which category they belongs to. However, when I wanted to sum just the quantity associated with the criteria which I am filtering, I couldnt find a formula which does that
View 2 Replies View RelatedAs I type in text into Excel often I see number signs instead of the text. Baffling - I have tried switching the format to wrap etc - nothing works.
Can anyone help - See attached file. The short solution is to retype the text - but this occurs alot and I am not sure why. Really appreciate your help.
I'm currently using this formula:
=INDEX(B4:B64,MATCH(I5,A4:A64,0))
If I5's value is displayed more than 1 time in Column A, I want the information in Column B to appear in the same cell the formula is in in Column J
How to do this query but show all results found rather than just one result.
I want the result to be able to show multiple terms from the search terms and index.
for example
Bob's BMW and Ford
Result would be
BMW,Ford
Rather than just Ford
Is this possible?
Is it possible to combine search results into a single cell?
On my spreadsheet I'd like to select from 4 columns and combine the result into 1 cell. I'd like to search on equipment number in column K that meets a condithion in column H, if this is a match I'd like to show the result date in column P and the duration in column R. Columns P & R shown in 1 cell...
Sort of like this... if "K" = "CV537" and "H" = "0" then show the resulting date from "N" and duration from "R" in one cell somewhere.
Possible?
I have a cell which I want to colour green if C6>9, yellow if O6>60 and red if BOTH C6 and O6 are above their respective numbers. The first two parts of this are obviously straight forward, but I cant work out how to get the third part of it to work.
View 2 Replies View RelatedI would like to sum Column BD and place the results in the first empty Cell in Collumn AZ. Then delete Columm BD.
View 2 Replies View Related