Same Time Value But With Different Conversion Results?

Jul 29, 2014

why is that I have the same time value but with different conversion results?

I have values in column A10:A26 with an average time of 00:00:38 result with converted value of 7052.04.

When I type 00:00:38 in Column A30, it gives me a result of 7139.37...

Why do I have different conversion results knowing that I have the same time of 00:00:38?

I Have attached a sample workbook.

View 14 Replies


ADVERTISEMENT

Time Conversion

Sep 10, 2009

I have an spreadsheet that is monitoring the productivity of agents, as well as the time that it takes to complete each task. My workforce keeps time as .50 = 30 minutes. So 7 and half hours is actually 7.5. Agents are putting the actual time of it took such as 15 minutes however I would like to insert a formula that will convert this for me manually. I know I could give them a conversion sheet, but it took quite a while to get them to actually be able to work in excel. So I would like to add this formula.

View 9 Replies View Related

Time Conversion/calculation

Mar 11, 2008

I need a formula that will calc the following: using Excel XP

#MIN.
INLUNCHOUTHRS
8:00 AM04:00 PM 8.00
8:00 AM304:30 PM 8.00
8:00 AM304:30 PM 8.00
8:00 AM304:00 PM 7.50
8:00 AM605:00 PM 8.00

View 9 Replies View Related

Time Conversion Formula

Mar 12, 2009

I have 4 columns:

A B C D
0:00 1:17 56.15 0.06


Column A is in hours:minutes:seconds.milliseconds
Column B is in hours:minutes:seconds.milliseconds
Column C is in seconds.milliseconds
Column D is in hours:minutes:seconds.milliseconds

I would like to represent all these columsn in this format:
hours:minutes:seconds.milliseconds

Is there a simple formula I can use? I was looking at the CONVERT function, but it doesn't appear to work for milliseconds.

View 9 Replies View Related

Date Time Conversion

May 4, 2006

Basically my requirement is to find out the time difference in terms of minutes between two days of time.

For example. the difference between(in minutes) 27/04/2006 10.01 and 29/04/2006 11.02. The reasults i want is in terms of minutes only.

View 7 Replies View Related

VBA Macro For Time Calculation / Conversion?

May 6, 2014

I am struggling with the calculation of time in excel and cannot find a reliable solution for it using formulas. The reason is, excel does not display negative time values, unless one formats the results as text. This is no good, as I need to add up those results and that's something excel cannot do with values formatted as text.

Therefore I am aiming to do just that by using a macro. The values in columns I & J should simply be converted and pasted into columns U and V respectively (see attachment). For example 200 minutes should appear as 03:20 [hh:mm]. Accordingly, -200 minutes = -03:20 [hh:mm]

View 2 Replies View Related

Simplifying Military Time Conversion Formula

Jun 17, 2014

I have written a formula to convert military time to 12-hour format.

View 3 Replies View Related

Date Time Conversion To 2 Separate Cells

Mar 25, 2014

How to convert this cell date time to 2 separate cells

A1 = 20140320 093000,

to B1 = 2014/03/20 and C1 = 09:30:00 am

View 2 Replies View Related

Time Conversion: Convert A Time From Hours/Minutes To Hours/Tenths

Oct 10, 2009

When I am converting a time from Hours/Minutes to Hours/Tenths, Excel is not converting it consitantely. EXAMPLE: 1:15 = 1.25. When I format the cell to present only one place past the decimal point, sometimes the cell will round up to 1.3, and other times it will round down to 1.2. What am I missing?

View 3 Replies View Related

Time Zone Conversion - Morning Or Night Shift

May 6, 2014

I have this Spreadsheet that has different country, Is it possible that it will auto convert the time into PHT Time (GMT +8) which is in Column A.

For example:

Its 3PM (Cell G1) in Bhutan. I want it to be converted in GMT +8
So therefore the time for GMT+8 will be 5PM and will be shown in Cell A1.

Also there will be an automated identifier in Column B that will identify if that time is for morning shift or night shift.

The morning shift is 12PM til 8PM
While the night shift is 8PM til 11AM.

View 4 Replies View Related

Need 3 Results In One Cell For Different Time Of Day

Jan 1, 2010

I am pulling what hair i have left out of my head, I am a New Desk Officer for a Local Police Dept trying to set up a patrol report sheet, I need to have a return of "Mids", "Days", "Swings" to be displayed in the cell next to the one labeled "Shift" depending on the time of day. IE: 12am-8am = "MIDS", 8am-4pm = "DAYS" 4pm-12pm = "MIDS".

View 10 Replies View Related

Best Way To Graphically Show Results Of Time / Work Study

Feb 23, 2012

I am trying to determine the best way to graphically show the results of a time/work study. Basically i have a list of tasks and each list has 2 sets of numbers assigned to it. One for how much time it takes on a scale of 1-3 and a second for how much value is added for the task, again on a scale of 1-3. I want to show some sort of graph/visual that shows the number of tasks as clusters (not name of task) in maybe quadrants. With the time on X axis and value on Y axis. I am envisioning something like a 9 box that would have low/low to high/high. I can only think to create a 9 box in excel and physically put circles(clusters) in each quadrant.

View 2 Replies View Related

Calculating Total Time In One Sheet And Pasting Results Automatically In Another Sheet

Apr 21, 2014

I have an excel workbook which requires us to enter the log details of some sites and then a report is generated using these logs (report attached) . [URL] .......

I want that excel should automatically identify the site and calculate its outage with the following formula:

Outage %age= Total Outage(min)/100.80
and add it in the respective column while identifying the outage.

e.g. if outage is of power then the calculated %age outage should be pasted in the power outage column in front of the respected site.

e.g. in the sheet attached above the first row in the first sheet states that SKU2326 was down for 50 mins

Now %age outage will be
Outage %age= 50/100.80
Outage %age=0.496

Now as the outage is related to power so this outage should go into power column in sheet number 3 labelled as "Network Total Up time Week#17"

Now the next time SKU2326 becomes down it should be added with this 50 mins and the outage calculated as presented above.

View 1 Replies View Related

Results Show Results Of Formula, But Should Be Blank

Jul 27, 2006

I am trying to create formula that will show overtime worked in a given day. The code I am using is a simple one ([ cell - 8], for hours worked). The problem is when the time cells are blank/not used it shows a -8 in the cell. what I need to do to create a code that will eliminate the -8 from showing. The cell its self is taking the result from another cell with a formula and then subtracting 8 from the result of the formula in the other cell.

View 2 Replies View Related

Hyperlink Conversion

Jul 30, 2009

I have just been told that one of our servers is being replaced this weekend. I have thousands of hyperlinks in excel docs that reference this server. Other than manually reestablishing the links one by one to the new server, is there a way to do some kind of global change to replace the old server name with the new server name?

These are not hyperlink formulas, but rather Insert>>Hyperlink.

Or, is there a way to convert these hyperlinks to hyperlink formulas that would omit reference to the server and thus not be broken during the conversion?

Grasping at straws because I cannot envision having to relink these one by one.

View 3 Replies View Related

Yen Conversion Macro

Feb 12, 2009

I have a worksheet with values in yen in the C column. My boss (who will not get it through her head that I am not a programmer) wants a macro that will take a yen/$ conversion rate (e.g., 88 yen/$) in cell J1 and convert all the amounts in column C into dollars with a 5% markup and rounding up. If I was doing this as a worksheet calculation rather than a macro, the calculation would look like this:

View 7 Replies View Related

PDF Conversion Code

Feb 9, 2010

The following codes publish the worksheets "Estimate" & "Photos" to a PDF file, it all works great accept that the sheets remain selected in the WB after the sheets have been published. How do I unselect the estimate and photos sheets?

View 6 Replies View Related

Scoring Conversion

Nov 4, 2008

If I have a scoring grade for different categories (8 in total) & the grades looks something like that: 1a=500, 1b=400, 1c=300, 2a= 250, 2b=210...& so on till 4c, but with different numbers for each category.

I need to come up with a total score of points if a person is given a certain grade from the above. ex. if they scored 2a on a certain category, 1c on
another & with all the rest of 8 categories scored. The number i need to come up with is the total points.

View 9 Replies View Related

Currency Conversion

Jun 23, 2008

I am working on a sheet that logs sales enquiries and quotations. The quotations may be made in either Dollars, Euros or Pounds. However, I want the 'reporting' column to be Pounds. I would appreciate any advice on the simplest way of achieving this.

Imagine column A is dollars, column B is Euros and column C is pounds. Most of the time the quotations are done in pounds and the other two columns will be blank. Also, there will only ever be one figure quoted per row. Would it be easier to create a fourth column (D) to consolidate the three separate figures together? We are using fixed exchange rates for the year, so to convert to pounds we will multiply any dollar quotations by 0.5 and any euro quotations will be multiplied by 0.69.

View 9 Replies View Related

Number Conversion

Aug 26, 2009

I have two sets of data that I need which is obtained from one source.

Basically, the stats I am working with in excel are Processing Time (minutes/seconds) and Volume Per Hour. I desperately need a formula that will allow me to convert the processing time into Volume per hour.

Example: Average Handle Time, 7min 7 seconds = x per hour. If it was just 7 minutes flat I could simply divide that into 60. I also can't make it 7.7 and divide that because 7.7 doesn't equal 7m7s.

Does anyone have any thoughts on a way to do this? I found a conversion chart online that allowed me to do this work manually 'Conversion Chart: Fraction of an Hour to Minutes', but I haven't determined a way to make a formula out of this.

View 9 Replies View Related

Date Conversion

Apr 3, 2007

I am trying to convert numbers from three cells into a date in one cell. I tried using the =DATE function, but it did not work. In A1, B1, C1, I have 1, 15, 2002. I would like cell D1 to take the info from the preceeding three cells and display "January 15, 2002"

Presently, I have A1...C1 formatted for "General." D1 is formatted for "Date." Yet I get the answer "August 23, 1907" (or 2792 as 'General').

View 3 Replies View Related

Data Conversion From One Form To Another?

Aug 30, 2012

How can I make my data in "input" tab to look like in the "output" tab the easiest way?

View 1 Replies View Related

Text To Date Conversion

May 20, 2014

I would like to convert date written like this "April 24, 2014" in Excel Date format.

Is it possible to do it with a formula or data import?

View 6 Replies View Related

Plus Sign Barcode Conversion

Mar 6, 2008

Why when I convert the following data, why the plus sign "+" converts to a /K?

I'm trying to convert values in groups of cells to a 3 of 9 barcode.

The value would be something:

+R4235

But when the font is changed to a 3 of 9 barcode and then I test the barcode in Notepad I notice that the plus sign is replaced with a /K.

View 5 Replies View Related

Amount To Words Conversion

Nov 8, 2009

I am using excel for invoice making...In the end i have a total amount. I need to type it in words for every invoice at present.
How can i convert it to words automatically? Is there any formula to it?
Or is there anything else? Please suggest me friends.

View 9 Replies View Related

Numerous If Conditions? GPA Conversion

Dec 25, 2009

I am trying to create a spreadsheet that will take all my grades from the semester (I'm a college student) and compute my GPA. I managed to get a weighted average for each class, but the grade is on a scale of 1-100. I need to convert that to a letter grade, and then a 4.0 scale. How can I set it up so that it will return "A" if 90<Grade<100, "B" if 80<Grade<90, etc.? I'm apologize if this is something simple, but I've been trying to find the right function for a long time.

View 5 Replies View Related

Proper Conversion To Numbers?

Jun 24, 2014

So I record a macro but it see only following bit

Range("A2").Select
Range(Selection, Selection.End(xlDown)).Select

I want this selection to be converted to numbers but in proper way (There is a green thing in corner in every cell and on top of column a yellow field with exclamation mark. When whole column is selected and you apply appropirate convert function from this exclamation mark menu it will convert it properly.

While if you just click on excel tab and choose numbers it just does not change it to numbers

View 2 Replies View Related

CInt() Conversion & Inputbox

Jul 2, 2009

as i understand CInt() converts STRING variables to INTEGER variables. I am trying to create an inputbox, with input validation. So, if the user types in an integer, it will continue to a msgbox; if they type a number in string format, as in 'two', it will convert this into an integer and again display it in a msgbox; if they press nothing a msgbox will appear telling them there is no input; and if they press cancel the programme closes.

View 4 Replies View Related

UDF For Floating Point Conversion Of 32 Bit Hex

Sep 18, 2009

See here:
http://www6.uniovi.es/~antonio/uned/...-754hex32.html

This site allows me to enter a 32-bit Hexadecimal Representation and get Decimal Floating-Point result.

For instance, 4224A012 gives me 41.2.

Is there a UDF available to do this inside of Excel?

View 3 Replies View Related

Fractions To Decimal Conversion

Dec 14, 2009

I have received help on this topic in the past and I though I had solved the issue, however I realized recently that my formula will not work on any fractions larger than 1 inch. I am converting machine threads in fraction form to a decimal equivalent. here is an example of the what the entry looks like before it is converted.

ex,
1/2-20 3A (becomes .5000)or
3/4-13 2A (becomes .7500)or
1-14 3A this one will not work with my current formula (should be 1.0000);

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved