Number Of Cells In Named Range
Dec 9, 2007
I would like to know how many entries/ cells a particular named worksheet range has.
(This named range is not a global name range, but a local one only for one worksheet!)
However, my code results in 0 always, althought the worksheet in question is defined (not nothing),
I see that the name range is defined properly (Edit -> Define) and refers to serval non-empty cells.
I would like to know how many cells in general a particular named worksheet range refers to. What do I do wrong?
Const strRngNmeCllShRawIntBlPre = "preBlRng" 'name of the named range
If Not wksTarget Is Nothing Then
intPreBl = Application.WorksheetFunction.Count(wksTarget.name & "!" & strRngNmeCllShRawIntBlPre)
MsgBox intPreBl
End If
View 6 Replies
ADVERTISEMENT
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
Apr 3, 2008
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
View 9 Replies
View Related
Apr 10, 2013
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
View 1 Replies
View Related
Feb 6, 2008
I’m having some difficulty getting my code to work. On a worksheet there are pairs of columns containing data; the leftmost column’s range is named. I have a userform with several optionbuttons that are named with the corresponding range names. I can successfully populate the userform's combox with unique items from a named range that is selected with the optionbutton.
When user selects item with combobox, I want to parse that named range with the combobox value, selects the value in the corresponding row (to the right) and then populate the userform's listbox with that value. The nonworking code is given below:
Private Sub cbxFiltList_Change()
Dim fCntrl As Control
Dim TempRange As Range
Dim TestRange As Range
Dim cLoop As Range
Content_lbx.Clear
For Each fCntrl In UserForm1.Frame1.Controls
If TypeName(fCntrl) = "OptionButton" Then
'If the optionbutton = True then the make the range to be tested the same name as that of the optionbutton'..............
View 2 Replies
View Related
Oct 2, 2008
I want to run a macro when a cell is changed and populate Cell A12 With
the value in a named range.
The Name of that range is in cell A3
so i assumed i could do the following:
View 7 Replies
View Related
Nov 30, 2008
here is the snippet of code I'm using
View 11 Replies
View Related
Sep 25, 2011
I have a sheet containing 2 lists of categories for income and expenses. These lists are named inc and exp, respectively, and are contained in a sheet called "Lists." They are dynamic ranges, meaning every time a value is added, the named range adjusts itself to include the new value(s). [=OFFSET(Lists!$A$1,0,0,COUNTA(Lists!$A:$A),1)]
I have 2 tables summarizing 12 months of data. The tables use sumif to find all occurrences of each category and sum them. There's 1 table for income, 1 for expenses. Each is a 2 column table, with all the categories for income in column A and their total for 12 months in column B. Same for Expenses in D & E.
To populate the categories in column A & D, I am currently using the simple =Lists!A1 =Lists!A2 (inc range), =Lists!B1 =Lists!B2 (exp range) and so on... the problem is when a value is added to either list, while the named range adjusts, I have to manually drag the formulas in Column A & B down 1 more cell to include the new value.
How can I use VBA to look for the inc and exp ranges (which will change in size), then populate each table with the most recent categories?
View 9 Replies
View Related
Dec 22, 2006
I'm having a 'mental block' day. I have a Named Ranges in a spreadsheet (Office XP). The range is defined as =OFFSET( ' Stock List'!$K$1,0,0, COUNTA('Stock List'!$F:$F),4)
i.e. starts at K1, is 4 cols wide and as deep as there are occupied cells in col F. (as I understand it). I want to treat this as an array in VBA and use 'x' and 'y' as indexes into the array. I want to either get the value from a single cell, or set the value in a single cell, which contain a string. I know its not correct but I have the formulae as follows, and for the life of me I cant figure out what the correct formula is -duhh!!
Dim x As Integer, y As Integer, z As String
x=3 'dummy test code
y=2
Range("MakerExtractArea").Offset(x, y).Value = "dummy"
z= Range("MakerExtractArea").Offset(1, 0).Value
View 7 Replies
View Related
Aug 16, 2014
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
View 5 Replies
View Related
Jun 21, 2014
using excel 2010
I created named range selection called "Contractors".....how do I put the drop down lists in a column of cells now?
View 2 Replies
View Related
Jul 21, 2006
Is anyone aware of some way to use the " dynamic named range approach" to only select the cells with numerical values in a column and name this range?
I've looked at the examples on this site but can't find any solution to this particular problem although I have a feeling that this should be possible.
View 9 Replies
View Related
Jun 2, 2006
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies
View Related
Jul 19, 2013
I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
View 2 Replies
View Related
May 27, 2009
I have a column of cells with formulas that either return "" or some number. I want to create a named range that includes all values that have some number and not "". The problem is that the formulas in the cells are being included in my named range.
Dynamic Named Range: =OFFSET('!'!$B$7,0,0,COUNTA('!'!$B$7:$B$100000),1)
Problem: includes the cells that have been set as ""
I tried COUNTIF in the OFFSET where ">0" but it would get messed up when my first cells were set to "".
View 4 Replies
View Related
Nov 11, 2012
I am running Excel 2003 on a Win7 system.
Here is my situation:
Each of my data sets spans roughly 75 columns by 250 rows at present, but this could expand. The first 7 rows contain metadata. Columns 2-25 or so contain the raw data, from which everything to the right is calculated. The data sets have most columns in common, but not necessarily all.
In order to tease out the most meaningful information from my data, I frequently sort all or part of it based on varying criteria. When I find a useful sorting criterion, I create a new column with a header that describes the criterion and populate it with a formula that returns a 1 if the condition of interest is met for that row, or a 0 if it is not. For example, if I am doing this in column AA, I might enter
=--(AND($AX8>$AA$4,$Y8>0))
and copy it down to the end of the data. The resulting vector of 1s and 0s quickly re-identify data that meets that criterion even after subsequent resorting. It also makes locating data that meets multiple sorting criteria extremely simple. Essentially, I create a truth table.
Cell $AA$4 in the above example contains a "comparator" value I might wish to change at some point, which would change the subset of data the condition selects for.
Here's the first hard part:
For each data set, I need the ability to generate meaningful plots that includes separate series based on the criteria I have described. However, I also need to retain the ability to resort the data or change the comparator value without disrupting these plots. In other words, the plots must NOT change when the order of the data is changed, but MUST change to display the appropriate data when the comparator changes.
Here's the 2nd hard part:
Once I have this working for one data set, I need to be able to port it to other data sets (which are contained in other workbooks), so that I can compare equivalent plots from each. I also need to minimize the number of manual steps involved in doing so, to avoid human errors and excessive time consumption.
The only other possible complication I can think of at the moment is that, to this point, I have been inserting blank rows to isolate subsets that I do not wish to perform further sorting on from each other.
Right now I am angling toward VBA code that loops through the entire data set to generate base dynamic ranges using the column header row (row 1) as the names, and the entire column of data for the rangeloops through the truth table columns to generate "branch" row ranges for each of the sorting conditions,loops through the entire data set one more time to create "branch" ranges for each of the base ranges.
I could generate some code to accomplish a one-off solution for a given configuration of a single data set (provided there is not a list length limit in a chart series that I'd be violating)...but without a dynamic named range, I don't know how to get to something that would update appropriately. So in essence, I am still stuck at the dynamic range part of this.
View 1 Replies
View Related
Oct 25, 2009
if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
View 9 Replies
View Related
Mar 14, 2013
Merge two columns into one list in excel
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
Here's the formula from the example:
Code:
=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))
I've played around with it, but could not come with any that worked.
View 3 Replies
View Related
Jan 13, 2014
Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
View 4 Replies
View Related
Jun 23, 2009
How do I count the number of cells that have a value greater than 0 in a range of cells?
View 2 Replies
View Related
May 13, 2013
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
View 5 Replies
View Related
Sep 4, 2007
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
View 8 Replies
View Related
Jul 1, 2008
I receive spreadsheets which tell me where samples are located in 96 well plates. The plates' rows are lettered A-H, and the columns are numbered 1-12. So, for example, the first well is labeled A1, the 12th is A12, the 13th is B1, and the 96th is labeled H12.
When I receive the spreadsheets, there are cells that tell me which wells are occupied. For example a cell will contain "A2 - B7" or "D3-F12" (sometimes with the spaces before and after the "-", and sometimes not." I need a program that will tell me that "A2-B7" (or "A2 - B7") means there are 18 wells occupied.
I've tried a few things, but a lot of problems arise when I try to do anything with names like "A1" because excel already defines "A1" as cell A1. Do you guys have any ideas? Am I being clear?
View 12 Replies
View Related
Nov 30, 2007
I am trying to find number of cells in a range.
I tried:
=COUNTIF(U97:U103,AND(">"&5,"<"&8))
and assumed it will count the 6 and 7's.
It always results with 0.
View 10 Replies
View Related
Jul 15, 2014
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies
View Related
Aug 10, 2008
I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A
Row2 56
Row3 44
Row4 65
AllData is a named range that refers to the range A2:A65536
AllData_UsedRange refers to A2:A4 by way of this formula.
=OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work...
ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address
Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
View 9 Replies
View Related
Sep 8, 2006
I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.
When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.
View 4 Replies
View Related
Aug 30, 2009
I am using a number of lists that act as filters for a range of cells. For the filters, I have a few selections for each and I also would like to have an all filter (no filter) but without the formula being too lengthy (or code). Is there an easy way to be able to not use a specific filter if a certain selection is made ("All" for example)?
View 5 Replies
View Related
Nov 3, 2009
So this is something that I'm not sure is possible in Excel. I would like to use an "if,then" statement to see if a number is in multiple cells. I know this is usually very simple except there's a catch here. In each cell there's a number range using a "-". So in a single cell a range would be 301-305. I am open to having the range done a different way like 301,302...etc. I just decided this would be an easy way to look at it and was hoping to find a way to solve this problem with leaving in the dash. Whatever is practical is fine with me.
Using Example A in the attached file I want to use this statement, =IF(308 is in any of the ranges in A3:A6, TRUE, FALSE).
So, for me, the alternative I want to avoid is Example B where I would have to list every single number and then check the whole range. I would like to avoid this because these examples, as you can imagine, are on a much smaller scale then what I will actually be dealing with.
View 11 Replies
View Related
Aug 26, 2009
I'm looking for a formula to enter within a particular cell which will return the largest number that appears within a range of cells, for example the range H:133 through L:136. If it's any easier, only one number will appear within the range, though it could appear in any cell within that range.
View 3 Replies
View Related
