Create A Named Range That Includes All Values That Have Some Number And Not ""
May 27, 2009
I have a column of cells with formulas that either return "" or some number. I want to create a named range that includes all values that have some number and not "". The problem is that the formulas in the cells are being included in my named range.
Dynamic Named Range: =OFFSET('!'!$B$7,0,0,COUNTA('!'!$B$7:$B$100000),1)
Problem: includes the cells that have been set as ""
I tried COUNTIF in the OFFSET where ">0" but it would get messed up when my first cells were set to "".
how to create a barcode in an excel spreadsheet? I am trying to print out a sheet that includes a code 128 barcode of a specific number that I type in.
why I'm getting an error with this code. I have a data set that becomes larger each time I run the report, so by selecting all the cells and naming the range, I don't have to hard-code the cells involved. Then, I want to be able to create a table from that named range. The error comes on the last line of code.
I would like to create a named range in VBA for column A, which is a sum of B and C. The problem is that A can have 0 as a value. What I would really like to do is define the named range in column A as A2 to the last column with a value in column B(B10) which would make the named range in column a A2:A10.
I have a named range within a sheet. It was pulled across when i performed a move/copy - create copy from another workbook. The name contains characters that cannot be displayed or recognised and so they are displayed as square symbols. This causes me an issue as i cannot delete the name. Even if i paste the list names, i cannot copy/paste the name as the characters are not recognised. I also tried using a macro to delete all names, which did delete all names, with the exception of this one. The VB code used was :
I have a worksheet where a number of the cells have been assigned names. I want to copy these cell names & create a list on another part of the worksheet. Does anyone have some code I could use to achieve this?
I would like a dynamic range to be multiplied with 2. The Range is always start in cell H14 to P?
I have multi checkbox in column F,
So here is an eksampel: If checkbox in F4 is true then Range H4:P4, should by multiplied with 2 else if the chekbox is FALSE, then only multiply with 1.
I want to entry data in the Range H14:P? by this code
Private Sub Worksheet_Change(ByVal Target As Range) 'Do nothing if more than one cell is changed or content deleted If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub
Macro that could look at a row and take the values of two cells, combine them and then create a range name for a third cell in the row.
For example; for row 5420, in column C there is the word Florida, in column D there is the number 6235, and in column F there is a sentence or two. Is there a way to automatically create a named range for the cell of column F that would be named FLORIDA6235? And if so, can the macro do this for every row even if the word and/or the number changes.
I have roughly 28,000 rows and nine columns that I am working with. That's why I was wondering if there was a way to automate this. There are 10 states and I don't know how many different numbers attached to the states, however there are many state and number combinations that repeat, so there would be several rows with Florida in column C, 6235 in column D but a different description in column F.
I have two sheets. Sheet A has a list of folders. This list is updates dynamically every time the sheet is opened. I have another sheet (sheet B) which has a list of all the files in the sub-folders, listed with the folder name at the top of the column and the files within in the column underneath with hyperlinks to them. The goal is to be able to navigate to the folders on sheet A and to click there to go to the column where all the files in that folder are linked to. What I need is a macro that will search a column and for every cell that has text in it and create in the column directly to the right a hyperlink to the appropriate cell in the top row in sheet B that has the same name as the text in the cell on sheet A that it finds. I already have the macros for listing the folders on sheet A and the macro for listing all the files in the sub folders in sheet B and they work fine. The goal is a link list which is dynamic and that recreates itself no matter what I add to the folders.
For instance, let’s say there is a folder timesheets. If I add a sub-folder called accounting to the folder Sheet A scans then timesheets would be bumped down one spot on the list, so the macro has to look dynamically for the text in the column on sheet A.
Also the addition of the new folder would move the order of the columns on sheet B, since both lists are alphabetical. So the link generation macro would need to search row 1 of Sheet B to find the match for the text in the cell to the left of where the link would be generated and create a link to the top of that column. I’ve looked all through the site and not found something that I can even modify to do what I need.
I'm looking for a function similar to =WORKDAY but with a slight variation.
I want the formula to return the date that is the closest non-weekend, non-holiday day that is a specific number of CALENDAR days from the start date. So the formula does not return weekend or holiday days, but does include them when counting the days away from the start date.
For example if the start date was Dec 1st, and I specified 14 days after this date, I would want Dec 15th returned (as the 14th is a weekend).
I would like to know how many entries/ cells a particular named worksheet range has. (This named range is not a global name range, but a local one only for one worksheet!)
However, my code results in 0 always, althought the worksheet in question is defined (not nothing), I see that the name range is defined properly (Edit -> Define) and refers to serval non-empty cells.
I would like to know how many cells in general a particular named worksheet range refers to. What do I do wrong?
Const strRngNmeCllShRawIntBlPre = "preBlRng" 'name of the named range
If Not wksTarget Is Nothing Then intPreBl = Application.WorksheetFunction.Count(wksTarget.name & "!" & strRngNmeCllShRawIntBlPre) MsgBox intPreBl End If
I am trying to set the value of a cell with the value of another cell, but using rangesNames. This syntax is failing: ActiveSheet.Range("starting_mileage") = "=ActiveSheet.Range("lot_mileage")". how do I structure this to allow it as flexibly as possible?
how can you custom a cell format in which you may in type in information that is displayed as ###-##-####-@# I searched everywhere and cannot find this.
For example, a medicare number.
I would need to type in 581566223b6, and it should be displayed as 581-56-2236-B6.
I am working with a worksheet that has hundreds of named ranges already in-place. When the creator defined these ranges, they defined them all statically. I would like to update each named range to be a variable named range.
I was thinking about doing a massive find / replace in the VB Editor, but I can't seem to find the named ranges. I assume they were defined from within Excel by the Insert > Name > Define method, and not through VBA and that is why I can't find them. Is there any way to simplify this process instead of manually trying to update each and every range?
I am trying to find a way to create a list of unique items from a named range. I have found a few solutions using filters for ranges that are contained in the one column but not named ranges that contain multiple rows and multiple columns.
Is there any way to copy all of the unique items from the named range to another location? Lets call the named range Table1 and it spans from B2 to J100.
Have a query that pulls general ledger data. Named Range SALES defined for Sales Account numbers. What is the best way to always have SALES (which pulls as negative number) converted to absolute values?
I have in my mind that it would be some sort of worksheet change event . . . but I don't really grasp the byval/byref TARGET concept by itself, let alone whether it can work on a named range.
I have four named ranges (Segment, Keyword, Impressions and Dropdown) and I would like to create a formula-based ranking of keywords by impressions and clicks. Using the following array formula, I am able to return the correct values for impressions or clicks:
{=LARGE(IF(Segment=DropDown,Impressions),$H7)} where $H7 is the number ranking 1, 2, 3 etc.
My question is what array formula could be used to find which row in the array returned that number and then pulls the data from the same row in the other named ranges?
Essentially find row of {=LARGE(IF(Segment=DropDown,Impressions),$H7)} but return Keyword and Clicks on that row.
Other Notes: I cannot use pivot tables and some values might be the same which would make Vlookups not accurate for duplicate values.
Link to an example document to clarify this. [URL] .......
Is anyone aware of some way to use the " dynamic named range approach" to only select the cells with numerical values in a column and name this range?
I've looked at the examples on this site but can't find any solution to this particular problem although I have a feeling that this should be possible.
This is a floowup to the issue that was originally posted as "Returning MAX/MIN values from multiple rows in a named range ". I marked that post as solved since I have worked through part of the issue and since have a different one.
I am successfully opening a .csv file using a variable value stored in a named range in my Main file (the variable includes the directory and path). I copy data from the .csv file to the Main file then I need to close the .csv file without saving but I want to do that by using the
Windows("xxxx").Activate
command where "xxxx" is the namedrange in my Main file which stores the .csv filename (without the directory and path prefix).
I can use the
ActiveWindow.ActivatePrevious
command but if I have another workbook open, this one closes instead of the .csv file I opened from the macro.
I realise this is probably very basic and I've searched the forums but can't find any identical postings.
I want to create a formula that converts data covering three months (i.e. Jan, Feb, Mar) into fiscal quarters (=Q4), how can I do that?
In Column A, I have the project name, in Column B, I have the month (in date format) by which it needs to be completed, and I want Column C to automatically calculate the fiscal quarter for each project using the data in Column B.
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
