I have multiple pivot tables with different data source. I wish to have one slicer which control all the pivot tables. I would have one common colum for all the pivot tables which is the one i wish to control for instance the person in charge. Note that all my pivot tables are from different data source. how to do it?
View 1 RepliesI have a single workbook with multiple worksheets. Each worksheet has a different pivot table displaying a different view of the data. Each pivot table uses the same source data at worksheet1.
Each week i add new data to the end of the source data, which means that I need change the source data reference separately in each pivot table to update each pivot table view to include the new data. This is laborious as there are quite a few pivot tables.
Was wondering if there is some way of changing the pivot table source data reference on all pivot tables at the same time.
The spreadsheet is comprised of 4 sales data sheets, one for each store. Each of these sales data sheets runs several pivot tables (One for dept sales, one for waste, one for sales on Selected UPCs etc) and I used to have 1 copy of each pivot table for each store (ie 24 pivot tables). Now I have found a way to have only 1 copy of each PivotTable which changes based on which store is selected using the following code:
Code:
Sheet13.PivotTables ("Top10LW").PivotTableWizard SourceType:=xlDatabase, SourceData:= _
.List(.Value)
This works great however I was repeating it for every pivot table I had in the spreadsheet, causing messy code and file corruptions.
Is there any code which I can use for updating all pivot tables, using as minimal code as possible, all in one hit?
I am trying to generate several pivot tables from one data source table. I have successfully created my first pivot table (A date field, and a water storage facility level reading) and subsequently a graph from this. I have worked out that I need to group my dates as I am supplied a daily reading, but only need monthly average. All worked great.
Now i need to create more pivot tables and graphs. The next one I want is to create one grouped by years. But when I create this new pivot table and change the grouping of the date field to yearly, it also changes the grouping on my first pivot table, which is undoing my work.How to tell excel that these pivots are independent, and I don't want them changing in unison? See screen grab of my source data and where I am up to...
Microsoft Excel - 401027_0100.00_0221.00.csv_2014-03-10_11-41-35.jpg
I've been trying to create pivot table in excel 2010. Unfortunately I've been getting this message "Data source reference is not valid"?
View 2 Replies View Relatedwhy is pivot table changing numbers to dates. It was fine all along, numbers retained the fromat of source data and now, all numbers in field columns are turning into dates. is there a setting I can change to prevent excel from reformatting numbers to dates?
View 1 Replies View RelatedI am trying to combine sorted data from 2 worksheets to a new work sheet to process further. I have one worksheet with order number, part number, order qty but with different delivery dates. On another worksheet, I have the order number too, part number, the qty delivered. The qty delivered is not always the same each delivery.
My aim is to find out how many are already delivered under a certain purchase order and the balance of undelivered parts.
I used pivot tables to sort out the data but I am stuck here not knowing how to extra the sorted data from the pivot tables to the 3rd worksheet. I will need to match the order number and the part number.
I have a report that was created for 2005 that contains two worksheets: a "source data" worksheet and a " pivot table" worksheet. I cleared out the 2005 data in the "source data" worksheet and replaced it with 2006 data...after this I refreshed the Pivot Table and everything seemed fine. When looking at the file size I noticed that it was almost twice its original size....upon further investigation I found that the Pivot Table was internally holding onto the old source data (the "Show" functionality of the rows/columns in the table lists the 2005 row/column headers as well as the 2006 headers....even though no data from 2005 is shown in the Pivot Table).
Does anyone know how to purge the old data from the internal Pivot Table memory?
I hope this is enough information....let me know if you need more.
Thanks in advance for any help,
Jon
I have a pivot table in the first sheet which includes the field "Date" as a column label.
In the remaining sheets, except for one, there are pivot tables based on the same underlying dataset which also include the field "Date" as a column label.
I would like to adjust the selection (i.e., exclude some dates) from the column label in the first sheet and see if it is possible to make the same adjustments automatically to the pivot tables in the remaining sheets as well.
note that the field "Date" is used as a Column label, i.e., it is not a Report filter.
I have this problem which I have simplified below:
Sheet 2 contains a Pivot table. One of the report filters is "Month-Year" (Eg, May-14 - in date format 'mmm-yy') which is selected by a Slicer on sheet 1.
Cell D1 on Sheet 2 contains a formula which calculated/displays the mmm-yy of the same period last year (eg May-13).
I want a code so that when I select the 'Month-Year' Slicer to filter the pivot table on Sheet 1 (eg to May-14), another Pivot on Sheet 3 is filtered with the previous year mmm-yy (May-13).
Is it possible to create pivot table from another multiple pivot table.
Example: I have two diff pivot table "Income" and "Expense" as well
and I need to preapare new pivot table using with those two pivot table
I have a list box contains of customer name and I used that to set up formula based on your selection in the list box. However, I wonder if there is a way that can select multiple customers in the list box and it will add up all that customers from your multiple selection like in the pivot slicer. I don't know if we have any formula that can do that complicated thing.
View 2 Replies View Relatedwith this macro?
I have a lot of pivot tables on multiple sheets in one workbook.
I want to deselect all "(blank)" from rows, and sort both rows and columns in ascending order.
I recorded a macro but it only refers to specific pivot tables, I would like it to do the same sorting for all pivot tables in the workbook.
Sub PivotBlankSort()
'
' PivotBlankSort Macro
'
'
Windows("Alt Assessment Y10 13-14.xlsx").Activate
Sheets("L&C Prog Sum2").Select
With ActiveSheet.PivotTables("PivotTable10").PivotFields("English")
.PivotItems("(blank)").Visible = False
[Code]...
etc as I move to each separate pivot table.
I am having a lot of trouble with pivot tables in Excel 2007 VBA. I am trying to create pivot tables using macros (connected to buttons the user can press to create the pivot table) - please don't ask why, but i need to do this!!!
I used the record fuction in excel 2007 to produce macro code which will produce the required pivot tables when the user presses a button.
Unfortuanately the coding seems to work fine when i have one pivot table in a file but breaks down if i record code to produce another pivot table.
I have attached some code below (which was produced by the record function) and is intended to produce 2 seperate pivot tables (the macro submacro2 produces the 1st pivot table and the macro submacro4 lower down the page produces the 2nd pivot table). I have also indicated the point in sub 4 where the code breaks down - basically submacro4 just doesnt run!
Background: I know ZERO about VBA and I am a Vlookup & Pivot Table noob, but experimenting everyday.
Every week, since August 29, 2009, I get a sales report from my customer in raw form showing point of sales data for the previous 7 days. After manipulating the data I end up with 11 columns.
Now, if I am only concerned with that one week then I can drop the whole sheet into a Pivot Table and all is well.
However, I have 12 sheets now (with more to come), one for each week, and the row count ranges from 3,328 to 16,414.
I do not want to consolidate the data.
I can copy everything to one sheet, and hope not to max out at the million row mark, but would prefer to keep it tabbed by week.
This is my data:
This is the Pivot Table I created:
The Pivot Table is exactly what I want and I like that I can also sort by school or district. The problem: Cells B6 through E6 show up with correct information but the totals below that are all wrong. They seem to pull the same data from question 4.
I am currently working with a pivot table someone else created. The data set has dates only, in the correct format. The slicer has the dates categorized by month and excludes the dates in which there was no data.
Here is my problem: I added a few new months of data. Everything is calculating just fine in the Pivot table. However, my slicer where I should be able to pick the month now has these months listed as all their individual dates. I want to put the December dates under "December" and so on. The data that was present before I loaded anything additional still has this feature.
How do I group these dates, to be able to them as months? By the way, the grouping function is grayed out.
For data I am using 1 pivot table. I have 4 tabs which use this pivot table to present different data on each tab.
For the first question, I have the same pivot table in the sheet twice in order to have multiple pivot charts with similar data but setup differently. I found this to be the simplest solution to presenting the data in the manner I want to see it. Otherwise I wish to set the tables up so that if I change a filter in one of the tables that the data is automatically updated to both tables.
The second question, this relates to the first question somewhat. I wish to change filters in 1 pivot table from tab one, and once that tab is updated I wish for all of the other tabs with this same pivot table to automatically update with the filter changes from the first time.
I have 3 different pivot tables (with 3 different data sources) on 3 seperate sheets (sheet2, sheet3 & sheet4). Each pivot table has a report filter which contains employees names. On sheet 1 I have a sort of 'dashboard' set up feeding from the data in the pivot tables, and a combo box form control from which I can select the employees names.
Currently, if I want to see John's data, I need to go to Sheet1 and select 'John' from the report filter, then goto Sheet2 and select 'John' from the report filter & the same for Sheet 3. I was wondering if it is possible to somehow link the pivot tables to the combo box - so that when I select 'John' from the combo box on Sheet1, it automatically selects 'John' in the report filters on sheets 2,3, & 4.
I have to track how well location managers are keeping track of skill competencies.
We rate skills as...
0 – know nothing ,
1 – read training manual,
2 – check off by manager.
I need the managers to provide these ratings then I have to report what locations need more training. When an new employee is entered into the system, the manager should give them a target of 2 for each skill the employee needs to gain. If the target skill is 2 rating higher than the current skill level, I have a column named Delta that records a 2.
I have learned how to use the pivot table feature. I can make separate pivot tables using filters that show…
a) how many 2s each employee has for a target,
b) how many 2s each employee has for deltas,
a) how many 2s each employee has for a current level and I can show the date the 2s where achieved
What I need is to learn how to combine all of this information on one pivot table (or report), but the filters really seem to make a mess of it all when it is all together. adding multiple sheets to one Pivot table.
Screenshots...
Count of Targets
Count of Deltas=2
Count of Current Skills
!What I need to produce!
[Code].....
I am trying to find a way to set up a macro that will allow me to pull in data - create the Pivot table - delete the table - then pull in fresh data (of a different row length - same number of columns) and create another Pivot table. I have tried to manipulate recorded code to no avail. Here is what I am starting with:
Const lngLastPossRow As Long = 65536
Range(Cells(1, 1), Cells(Cells(lngLastPossRow, 1).End(xlUp).Row, 24)).Name = "Data"
ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:="Data"). _
CreatePivotTable TableDestination:="", TableName:="PivotTable2", _
DefaultVersion:=xlPivotTableVersion10
ActiveSheet.PivotTableWizard TableDestination:=ActiveSheet.Cells(3, 1)
ActiveSheet.Cells(3, 1).Select
ActiveSheet.PivotTables("PivotTable2").AddFields RowFields:=Array(" ", _
"Channel", "Sales/Exchange", "Mode of transp.", "Sold-to Party", "Material", "Data")
While it creates the first pivot table fine, after deleting it and starting again it wants to create the next sequence (PivotTable3) which crashes the macro. I must close the file and reopen to run it again.
I created a macro to create the beginning of a pivot table- just the rows and slicers, because when I tried making a longer macro to create the entire pivot table (formatting, etc) I couldn't get the macro to work.
So I do get all the vertical rows I want, and I do get all the slicers I want. But I get blank space. I think this is because the pivot table is created from another tab, and the length of data in that tab will vary from file to file (I'm doing another 30 or so of these, all with varying amounts of data, but the same data categories).
Anyway, I get slicers, but in addition to getting the categories I want, I also get "(blank)" below the names in the slicers. Is there a way to add some code to the macro to remove the blanks so I don't get this field?
I have copied and pasted the macro below, with identifying data changed.
I have two pivot tables, both of which source the same sheet of data. Each record in the data has two fields, Region ID of person and Region ID of facility, that reference the same list of Region IDs via vlookup (it's just numbers 1-12). Either one or both can be blank. One pivot outputs counts by person Region ID, and the other, by facility Region ID.
Using a combination of nested IF statements and vlookups, I tried making a third Region ID field that could be used as a slicer to control both tables, but what I end up with is an undercount in one of the tables. The only thing that works so far to output the correct counts is having two separate slicers, the facility Region ID being the slicer for one and the person Region ID being the slicer for the other. If the end user wants to see counts for one Region ID, they have to manually set one slicer equal to the other. But what we want is just for the end user to be able to control both tables just by pushing a single number, Region IDs 1-12.
I can make one of the slicers hidden but then how do I get the hidden slicer to automatically select Region ID values equal to the nonhidden slicer? Alternatively, I could somehow program a combo box or list to control the two different slicers, then the slicers would be hidden and the user would see only the combo box/list. (I guess in either of these alternatives, I could just use a report filter instead of a slicer; either way, I still have to get items in one to automatically select based on the user's selected items in another).
FYI, some of the options I looked up involved PowerPivot, which I do not have access to. VBAs/macros are ok.
I' have two slicers that each control two pivot tables. The slicers both are for the same field ("Department") but I guess the pivot table structure differences don't allow me to simply have one control all four tables.
Since both slicers contain the exact same options from the same field on the same origin table, I would like to problematically ensure that when department "A" is selected on slicer1, it is also selected on slicer2. When departments "A, B, & C" are selected on slicer1, the same are selected on slicer2. When filters are cleared... you get the picture.
I am trying to update multiple pivot tables from different OLAP cubes based on the same cell value that an user defines,
namely one country for which he/she wants the create the report for. The code I recorded goes like this:
VB:
Sub TUR()
Sheets("Pivot").Select
ActiveSheet.PivotTables("PivotTable1").PivotFields("[Geography].[Geography]"). _
ClearAllFilters
ActiveSheet.PivotTables("PivotTable1").PivotFields("[Geography].[Geography]"). _
CurrentPageName = "[Geography].&[TUR]"
End Sub
In this example, TUR stands for Turkey.
Basically, I have over 20 countries and at least 3 different OLAP cube-based pivot tables in my report, I can do it with 3 x 20 different macros but that seems like taking the long way.
I have ~ 300 pivots (one on each tab) all linking to one data set in the same workbook. I realized that I neglected to select the year 2006 in my column label for every pivot table and hoping that there is some way to
simultaneously update all pivots to include 2006 data instead of manually checking the box off one by one.
I have two pivot tables on one sheet and I want the page fields on the second to change when I change the first pivot table. I found the below code and have applied it to one of the three page fields I have, but can't seem to duplicate it for the other page fields:
View 7 Replies View RelatedI have a huge data set with survey data (sample attached: sample.xlsx). Column headings: survey questions Row headings: respondent identifiers (names) Row data: answers to questions (numeric values, only five answer options 1,2,3,4 or 5, no blanks)
I need to build that kind of pivot table:
Rows - list of particular questions (i.e. questions no. 3, 7 and 12) Columns - list of all diffrent answer entries (eventually, it will be 1,2,3,4 and 5) - it could also be questions in columns and answers in row (no difference) Values - count answer entries (i.e. how many answers "5" are on quesiton 3)
------
UPDATE: explanation added.
The reason I need pivot tables: i'll have to cross analyze multiple sets of questions. I'll have to do such cross-analysis 100+ times, so, writing a formula for each time does not quite work...
I am trying to create a "dashboard" style report using a pivot table and pivot chart with slicers. All of these objects (table, chart and slicers) are in the same worksheet. However, the users of the report (read executive management) are not very Excel savvy and I want to protect the format of the report. So, I want to protect the sheet and only allow access to the Pivot table options. However, in order to make the slicers usable, it appears that I have to allow them to edit objects. This unfortunately means that they can then move those objects (the Slicers and Chart).
I am looking for a way to lock the slicers and pivot chart in position. I have already accounted for column width changes created by modification of the pivot table parameters by selecting the "Don't move or size with cells" option under PivotChart Tools > Size > Format Chart Area > Properties > Object positioning. This is the default/locked-out setting for the slicers.
I have a Reporting workbook I designed. There is a "Parent" workbook with the following design.
It has 6 Pivot Tables on a Sheet called "Data"
It has 6 Pivot Charts that were created from these tables on a page called "Summary"
These 6 Pivot Charts are all linked through a pair of slicers.
There is a "control" page which has instructions and buttons that trigger "Refresh All" and "Create Child Workbok".
This design is so that someone unfamiliar with excel could conceivably create the final product.
Essentially I have written/put together VBA to Create a new workbook "child" which has should be a funcitoning copy of the "parent".
The problem is the copiedmoved (I have tried both) Pivot Charts no longer update/refresh when the pivot tables change. I have script that reconnects the Pivot Tables to the Slicers. Slicers are fully funcitonal. Links in cells are fully functional.
Some of this code might look familiar.
Code:
Sub createWB()
' Copies VBA modules, Calls
Dim wbNew As Workbook, wbT As Workbook
Set wbT = ActiveWorkbook
On Error Resume Next
Kill ("PATHmod1.bas")
Kill ("PATHmod2.bas")
[code].....