I have to track how well location managers are keeping track of skill competencies.
We rate skills as...
0 – know nothing ,
1 – read training manual,
2 – check off by manager.
I need the managers to provide these ratings then I have to report what locations need more training. When an new employee is entered into the system, the manager should give them a target of 2 for each skill the employee needs to gain. If the target skill is 2 rating higher than the current skill level, I have a column named Delta that records a 2.
I have learned how to use the pivot table feature. I can make separate pivot tables using filters that show…
a) how many 2s each employee has for a target,
b) how many 2s each employee has for deltas,
a) how many 2s each employee has for a current level and I can show the date the 2s where achieved
What I need is to learn how to combine all of this information on one pivot table (or report), but the filters really seem to make a mess of it all when it is all together. adding multiple sheets to one Pivot table.
Count of Targets
Count of Deltas=2
Count of Current Skills
!What I need to produce!
I am trying to combine sorted data from 2 worksheets to a new work sheet to process further. I have one worksheet with order number, part number, order qty but with different delivery dates. On another worksheet, I have the order number too, part number, the qty delivered. The qty delivered is not always the same each delivery.
My aim is to find out how many are already delivered under a certain purchase order and the balance of undelivered parts.
I used pivot tables to sort out the data but I am stuck here not knowing how to extra the sorted data from the pivot tables to the 3rd worksheet. I will need to match the order number and the part number.
I have a pivot table in the first sheet which includes the field "Date" as a column label.
In the remaining sheets, except for one, there are pivot tables based on the same underlying dataset which also include the field "Date" as a column label.
I would like to adjust the selection (i.e., exclude some dates) from the column label in the first sheet and see if it is possible to make the same adjustments automatically to the pivot tables in the remaining sheets as well.
note that the field "Date" is used as a Column label, i.e., it is not a Report filter.
I have a single workbook with multiple worksheets. Each worksheet has a different pivot table displaying a different view of the data. Each pivot table uses the same source data at worksheet1.
Each week i add new data to the end of the source data, which means that I need change the source data reference separately in each pivot table to update each pivot table view to include the new data. This is laborious as there are quite a few pivot tables.
Was wondering if there is some way of changing the pivot table source data reference on all pivot tables at the same time.
I have created a pivot table and I'm using report filters for both Client and Asset (obviously there are a lot more data points). When I filter on Client 1 I would expect to only see Port 1 - Port 7 available in the Asset filter however, I see every asset in the data set. I need to pick and choose using the Select Multiple Items check box without having to scroll through every single asset. Is there a way to easily do this?
I am having a lot of trouble with pivot tables in Excel 2007 VBA. I am trying to create pivot tables using macros (connected to buttons the user can press to create the pivot table) - please don't ask why, but i need to do this!!!
I used the record fuction in excel 2007 to produce macro code which will produce the required pivot tables when the user presses a button.
Unfortuanately the coding seems to work fine when i have one pivot table in a file but breaks down if i record code to produce another pivot table.
I have attached some code below (which was produced by the record function) and is intended to produce 2 seperate pivot tables (the macro submacro2 produces the 1st pivot table and the macro submacro4 lower down the page produces the 2nd pivot table). I have also indicated the point in sub 4 where the code breaks down - basically submacro4 just doesnt run!
The Pivot Table is exactly what I want and I like that I can also sort by school or district. The problem: Cells B6 through E6 show up with correct information but the totals below that are all wrong. They seem to pull the same data from question 4.
For data I am using 1 pivot table. I have 4 tabs which use this pivot table to present different data on each tab.
For the first question, I have the same pivot table in the sheet twice in order to have multiple pivot charts with similar data but setup differently. I found this to be the simplest solution to presenting the data in the manner I want to see it. Otherwise I wish to set the tables up so that if I change a filter in one of the tables that the data is automatically updated to both tables.
The second question, this relates to the first question somewhat. I wish to change filters in 1 pivot table from tab one, and once that tab is updated I wish for all of the other tabs with this same pivot table to automatically update with the filter changes from the first time.
I have 3 different pivot tables (with 3 different data sources) on 3 seperate sheets (sheet2, sheet3 & sheet4). Each pivot table has a report filter which contains employees names. On sheet 1 I have a sort of 'dashboard' set up feeding from the data in the pivot tables, and a combo box form control from which I can select the employees names.
Currently, if I want to see John's data, I need to go to Sheet1 and select 'John' from the report filter, then goto Sheet2 and select 'John' from the report filter & the same for Sheet 3. I was wondering if it is possible to somehow link the pivot tables to the combo box - so that when I select 'John' from the combo box on Sheet1, it automatically selects 'John' in the report filters on sheets 2,3, & 4.
I am trying to find a way to set up a macro that will allow me to pull in data - create the Pivot table - delete the table - then pull in fresh data (of a different row length - same number of columns) and create another Pivot table. I have tried to manipulate recorded code to no avail. Here is what I am starting with:
Const lngLastPossRow As Long = 65536 Range(Cells(1, 1), Cells(Cells(lngLastPossRow, 1).End(xlUp).Row, 24)).Name = "Data"
While it creates the first pivot table fine, after deleting it and starting again it wants to create the next sequence (PivotTable3) which crashes the macro. I must close the file and reopen to run it again.
I am trying to update multiple pivot tables from different OLAP cubes based on the same cell value that an user defines, namely one country for which he/she wants the create the report for. The code I recorded goes like this:
VB: Sub TUR()
Sheets("Pivot").Select ActiveSheet.PivotTables("PivotTable1").PivotFields("[Geography].[Geography]"). _ ClearAllFilters ActiveSheet.PivotTables("PivotTable1").PivotFields("[Geography].[Geography]"). _ CurrentPageName = "[Geography].&[TUR]" End Sub
In this example, TUR stands for Turkey.
Basically, I have over 20 countries and at least 3 different OLAP cube-based pivot tables in my report, I can do it with 3 x 20 different macros but that seems like taking the long way.
I have ~ 300 pivots (one on each tab) all linking to one data set in the same workbook. I realized that I neglected to select the year 2006 in my column label for every pivot table and hoping that there is some way to
simultaneously update all pivots to include 2006 data instead of manually checking the box off one by one.
I have two pivot tables on one sheet and I want the page fields on the second to change when I change the first pivot table. I found the below code and have applied it to one of the three page fields I have, but can't seem to duplicate it for the other page fields:
I have multiple pivot tables with different data source. I wish to have one slicer which control all the pivot tables. I would have one common colum for all the pivot tables which is the one i wish to control for instance the person in charge. Note that all my pivot tables are from different data source. how to do it?
The spreadsheet is comprised of 4 sales data sheets, one for each store. Each of these sales data sheets runs several pivot tables (One for dept sales, one for waste, one for sales on Selected UPCs etc) and I used to have 1 copy of each pivot table for each store (ie 24 pivot tables). Now I have found a way to have only 1 copy of each PivotTable which changes based on which store is selected using the following code:
I'm trying to use a List Box to select multiple items on my Pivot Table but I can't seem to get it to work. Its the Report Filter part of the pivot table.
When the list Box is set to fmMultiSelectSingle it work and selects the indivdual items, but I need it set as fmMultiSelectMulti for if i'm also needed to select multiple items. (which doesn't seem to work!)
I am trying to generate several pivot tables from one data source table. I have successfully created my first pivot table (A date field, and a water storage facility level reading) and subsequently a graph from this. I have worked out that I need to group my dates as I am supplied a daily reading, but only need monthly average. All worked great.
Now i need to create more pivot tables and graphs. The next one I want is to create one grouped by years. But when I create this new pivot table and change the grouping of the date field to yearly, it also changes the grouping on my first pivot table, which is undoing my work.How to tell excel that these pivots are independent, and I don't want them changing in unison? See screen grab of my source data and where I am up to...
Microsoft Excel - 401027_0100.00_0221.00.csv_2014-03-10_11-41-35.jpg
I have a perfectly working pivot table and I would like to make some graphs based on the report filter. My report filter has 4 categories, with each more than 10 sublevels.
When I make one pivot graph/chart, this goes fine, the data is ok, and I am happy. But one I make a second, and thus adjust the report filter, the first graphs changes according to the filter. I dont want that to happen
Ultimately I would like a powerpoint presentation with multiple charts, based on one table, with different report filter filters. Updated ONLY on the values, not the filter.
- Table 1 has ~1,600 records (name of game, meta score, user score) - Table 2 has ~3,000 records (name of game, genre, publisher)
- Table X has ~1,600 records (name of game, meta score, user score, genre, publisher)
Basically, I want to take the genre and publish columns from Table 2, and add it to Table 1. However, I want to ignore the extra ~1,400 games that Table 2 has.
I'm nearly a complete noob when it comes to excel. Noob to the point where I don't even know what this thing is called, so I don't even know how to search for it properly! I know something can be done since there is a common column between the two (name of game).
Edit: Also, I think it'd be easier if I were able to attach my excel spreadsheets but I don't even know how to do that
Is there a way to have separate Report Filters for each column in a pivot table?
I am trying to create a pivot table with 3 columns - 1: account code 2.current year (2011) 3. prior year (2010)
My Row Label is an account code field - each row is a different account code that sums up dollar amounts for the two financial years. The problem is that I need Columns 2 and 3 to have separate Report Filter criteria. So in Column 2 - I need the filter to weed out anything that is not 'Financial Year 2011'. In Column 3, I need the filter to weed out anything that is not 'Financial Year 2010'. Setting up a filter for one screws up the second, and vice versa.
Alternatively, how can I make two side-side-pivot tables that each have their own Report Filters?
I have an excel workbook with 11 different worksheets. Each worksheet represents a project my company is working on. And in each worksheet there is exactly the same table, just with different data).
Now we would like to get an overview of all these different data put together in one 'summarizing' table on a new worksheet (number 12).
-Is it possible make such a table without having to copy past all the time? -The data in the tables may change over time, so it would be good if that 'summarizing' table automatically adapts to the other ones.
I currently have several pivot table that's linked to a single pivot table(let's call it X) in the same workbook. I'm doing this to limit the file size because the data in X comes from a text file that has millions of lines. However, it's such a pain every time I need to update the tables because simply clicking "refresh" does not update those tables that are linked to X with new data. I would have to instruct the wizard in every linked table to point to X every time. I'm trying to write a small program to re-point to X for each of those other pivot tables whenever i refresh data. However, after trying to record the steps to do this I'm still unable to run these
Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code: Sub Auto_Open() ' Dim sht As Worksheet If Range("A1") = 1 Then