I have been searching through these forums for 2 days. And there are several threads that address this issue, however I can't seem to figure out how to put it all together correctly.
I have all of my code written (it may not be good, but it works). The ONLY thing I need now is to be able to paste the autofiltered result to the first blank row in the "General" Worksheet. It works fine if I specify a row...
Here is what I have so far:
Private Sub CommandButton3_Click()
Dim strPick As String
Dim LastRow As Long
i am working on a simple workbook but my problem is not that simple(at least it is not simple for me). there are two worksheets "Transactions" and "Account Statement". what i would like is a macro that will process the date, debits or credits enterded into "Transactions" and paste them below each other in "Account Statement" See example attached.
I need to paste these cells to the empty cells below.
The problem is that the first empty cell below could be any given row number (it will be dynamic) and the last row will also be any given row number (also dynamic).
How can I paste these 9 formula's to all rows below?
Right now I use Range() to define where I want something pasted. How do I use get away from that to just use the next empty row, so I don't have to keep changing the code everytime the data sheet expands?
Here is an example of what I'm using: Sheets("Sheet1").Select Range(Range("F4"), Range("F4").End(xlDown)).Select Selection.Copy Range("BX4").Select ActiveSheet.Paste Range("BX3").Select ActiveCell.FormulaR1C1 = "Header"
The following code is intended to copy and paste the value from cell I2 to the first unused cell in column K. There is is header in cell K1. It works fine if there is a value in K2 or K3, etc., however, if K2 is blank (all cells beyond K1 are blank) I get an error 400 when I run the sub.
I'm have never learnt VB before and would like to try to write one to perform the following: If the next cell isempty, go to the last cell, copy it and paste into the empty cell; Else if the cell is not empty, go to next line and repeat the procedures until reach row =10000
.(BEFORE) Row 1:Product A Row 2: Row 3: Row 4: Row 5:Product B Row 7: Row 8: Row 9:......
I want to copy a value in "A1" and i would like to paste it in Column "J" but the problem is that there are some values in column 'J' so i want a code that finds the first empty cell in column "J" and paste in there the value from "A1"
Have a small VBA code that simply copy a row and then paste it on first empty row in another sheet. Its working if i use a regular macro, but i have some problems to get it to work with some code. I want it as VBA since the copying is alot smoother. The problem i have in the code is the PasteSpecial.value, Since i dont want the formula to get pasted. Attachiing the worksheet. Its the macro PasteSpecial that i need alittle guiding on if possible.
I need the code to paste my selection in worksheet SORT, into the first available cell in column A. Intention is not to overwrite existing values in column A.
I have a column of data in a range with some empty cells, I am trying to copy this data and then paste it into another column immediately after the existing data but without the empty cells, I am currently using the record button on the macro and copying to another column and then sort up a-z then copy again and paste. Long winded and sometimes still gives me a empty cell.
A B C D
COPIED TO ANOTHER COLUMN EXISTING DATA EXISTING DATA A B C DRange("E3:E51").Select Selection.Copy Range("O3:O51").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
My spreadsheet is sorted in numerical order in column A. Column B through AA only sporadically has data, although the data is present in full throughout each row. How can I add to my macro to copy the first full row of data (B#-AA#) and paste until it reaches the next row of full data and then repeat the same process. The biggest issue is once it reaches the last row, I would like it to paste the data in 29 additional rows.
Need code to copy a column from a worksheet, and paste it in the first empty column in a second worksheet? I can do this easily when I want to copy/paste to the first empty row using the
Sheet3.Select Range("A1:A10").Select Application.CutCopyMode = False Selection.Copy Sheet2.Select Dim LastCell As Range With ActiveSheet Set LastCell = .Cells(.Rows.Count, "A").End(xlUp) If IsEmpty(LastCell) Then 'do nothing Else Set LastCell = LastCell.Offset(1, 0) LastCell.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End If End With
but I cannot find a way to change this to columns!
I want to create a macro to paste some data into the next empty cell. Below is sort of what I need but this show it going to a particular cell, I need it to got to next open cell in the range from say BY3. So next macro run it would copy and paste the data from T3:T9 (always this range) to BZ3 then CA3, CB3 and so on.
[[Sub CopyData()] ' ' CopyData Macro ' Copy The Data To Build Graph '
I have 2 worksheets, one called "Consolidated" and one called "Converted".
I would like to have a spreadsheet where I press the update button and a macro runs that searches for the word "Converted" in column E on the Consolidated spreadsheet (the original). When it finds it, I would like the entire row to be cut and pasted onto the "Converted" worksheet.
I have managed to do this with my current code:
[Code] .....
However when this macro runs, the row left behind on the original sheet is a blank row and I don't want this. I would like it to be continuous spreadsheet, not dotted with random blank rows!
I have the following macro that imports a copy of data into a worksheet. I would like it to paste the data below in first empty row (where column A is empty) instead of A1. I am using Excel 2010.
I am using MS Excel 2000. Sheet1 is my working sheet. Cell A17 displays the current date (dd/mm/yyyy). Cells B17:K17 display my summary figures for that day. What I would like is a macro button that would look at the date in Cell A17, and if it is the first of the month …. eg 01/03/2005 it should insert a new sheet into the workbook and put the name Mar05in this case or what ever month it is on the tab. It then copies Cell A17:K17 and pastes the data in to the corresponding monthly sheet starting in A3 to K3. Because my working sheet (Sheet1) is updated with different data daily the new summary data (always in A17:K17) needs to be copied and pasted under the previous days entry in the corresponding monthly sheet. For the month of March I should end up with 31 entries giving me a summary for that month.
I need my macro to copy and paste from one worksheet to another, which is fine. However I need the copied value to be pasted into the last empty cell in a specific column. It is currently pasting each copied value into the last empty cell in column 'A' regardless of which column I specify it to copy to in my code.
Is it possible to have a macro copy a range of cells (A1:K1) and place it in the next empty row? My first row has formulas in it to grab information from a separate sheet within the same workbook with special formatting so I can import it to another program. What I want to be able to do is take that first row, use my macro button to copy and paste (only text, not the formulas) the information into row 2, then when the information changes in row 1 with new information (from the other sheet) it will copy and paste the new information into row 3 and so on.
I have 2 worksheets, one called "Consolidated" and one called "Converted".
I have a spreadsheet where I press the update button and a macro runs that searches for the word "Converted" in column E on the Consolidated spreadsheet (the original). When it finds it, the entire row will be cut and pasted onto the "Converted" worksheet.
I have managed to do this with my current code. However when you press the update button again, all the newly pasted rows on the Converted worksheet are deleted. (I would like when i press the update button it to NOT affect the Converted worksheet, just add any new data found on the Consolidated sheet to the Converted sheet.) I assume this is because my current code her below is NOT telling the spreadsheet to paste to the NEXT AVAILABLE EMPTY ROW. Current code:
[Code].....
So the problem is this line:
[Code] .....
I have attempted to replace this line with:
[Code] .....
But there is something wrong as the code keeps breaking on that line!
I have this macro and at the present time, can only compare two worksheets. One of my worksheets contains column headers with data, the other worksheet just contains column headers. The macro will match the data against the column header and paste below. I'm doing it this way because I have several tables I export from a MySQL database, but some of them have more fields than others so I was trying to get all of the data to line up in under the correct column header from each table. I need editing the macro to allow for
1) More than one worksheet to be analyzed at a time 2) If the first request is not possible, I would like for the macro to paste results at the next empty cell. As of now, it will only copy one at a time (which requires me to house the data in another worksheet everytime I run the macro).
Below is the code:
Dim ws1 As Worksheet, ws2 As Worksheet Dim HeaderCells As Range, Hdr As Range, hdrFIND As Range
Application.ScreenUpdating = False 'speed things up Set ws1 = ThisWorkbook.Worksheets("HEADERS") 'Define name of worksheets Set ws2 = ThisWorkbook.Worksheets("B")
I am trying to find a macro that will filter on Column F (non-blanks - just cells with dates) cut just the filtered data (A:G inclusive)without the Header Rows and then paste/move this data to the first empty row on another sheet called "Complete"
So that I get the cells in columns A:G with dates in moved to the "Complete" tab and they are no longer in the sheet "Deliverables"
I have the following code to transfer data to another sheet, but there are 2 issues with it:
1. I want to just paste the values, but every code I have tried has had object or syntax errors that can't seem to be fixed
2. If I run the macro a second time, it overwrites what was pasted the last time the macro ran. My code looks like it should look for the next empty row in the range, but it doesn't seem to do that.
What is the correct syntax to do the above. Here is the code:
Sub Update()
Dim c As Object Dim rngA As Range Dim cc As Object Dim rngAA As Object
'Check every cell in the range for matching criteria. For Each c In Sheets("OpenGen").Range("F9:F208")
I am trying to write a macro to do the following: Loop through a range of cells on a worksheet Sheet1 M17:M46 and if there is text in the cell then Copy all the data to the left Of Coumun M in the same row and paste the values to the next open row of a range A17:L46 on another worksheet (sheet2.) Basically the text in column M is an idicator to add the data to an order sheet. If there is no text don't add the data , look in the next row etc. I'm not sure if this is the way to go
Sub CopyRows() Worksheets("sheet1").Select FinalRow = Range("M65536").End(xlUp).Row ' Find the last row of data ' Loop through each row For x = 2 To FinalRow ' Decide if to copy based on column M ThisValue = Range("M" & x).Value ' could be any value If ThisValue = "yes" Then Worksheets("sheet2").Range("A" & x & ":L" & x).Copy Worksheets("sheet1").Select NextRow = Range("A65536").End(xlUp).Row + 1 Range("A" & NextRow).Select ActiveSheet.PasteSpecial = xlValues Worksheets("sheet1").Select End If Next x End Sub
I am looking to create a macro to be assigned to a button that copies the last row of data entered and then pastes it to the last empty row on a different worksheet. This is a dummy spreadsheet to work with (I have more data, but the concept is one in the same). Sheet1 ("Branch1"), Sheet2 ("Branch2"), and Sheet3 ("All"), the names in brackets are names of the sheets, but for ease I'll refer to them as Sheet1, Sheet2, and Sheet3. I have columns beginning in B as follows: Date, Branch, Currency, Coin, and Total (the branch and Total are tied to formulas, however I just need to the text values and formats to come over to the other worksheet). have the portion regarding the copy of the last row in Sheet1, however it won't PasteSpecial.Selection in Sheet3 as it says the cells are not sized or formatted correctly.
VB: Sub CopyB2() lr2 = Sheets("Branch2").Range("B" & Rows.Count).End(xlUp).Row lr3 = Sheets("All").Range("B" & Rows.Count).End(xlUp).Row + 1 Sheets("Branch2").Range("B" & lr2).EntireRow.Copy Sheets("All").Range("B" & lr3) End Sub
