I am trying to find a macro that will filter on Column F (non-blanks - just cells with dates) cut just the filtered data (A:G inclusive)without the Header Rows and then paste/move this data to the first empty row on another sheet called "Complete"
So that I get the cells in columns A:G with dates in moved to the "Complete" tab and they are no longer in the sheet "Deliverables"
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
I am looking to create a macro to be assigned to a button that copies the last row of data entered and then pastes it to the last empty row on a different worksheet. This is a dummy spreadsheet to work with (I have more data, but the concept is one in the same). Sheet1 ("Branch1"), Sheet2 ("Branch2"), and Sheet3 ("All"), the names in brackets are names of the sheets, but for ease I'll refer to them as Sheet1, Sheet2, and Sheet3. I have columns beginning in B as follows: Date, Branch, Currency, Coin, and Total (the branch and Total are tied to formulas, however I just need to the text values and formats to come over to the other worksheet). have the portion regarding the copy of the last row in Sheet1, however it won't PasteSpecial.Selection in Sheet3 as it says the cells are not sized or formatted correctly.
VB:
Sub CopyB2()
lr2 = Sheets("Branch2").Range("B" & Rows.Count).End(xlUp).Row
lr3 = Sheets("All").Range("B" & Rows.Count).End(xlUp).Row + 1
Sheets("Branch2").Range("B" & lr2).EntireRow.Copy Sheets("All").Range("B" & lr3)
End Sub
i need to have 6 or so cells copied and pasted into another sheet. (when a button is pressed) However before the data is pasted it checks if there is anything in the cell(s) that are being pasted into, if there is something then move down a line and paste. Here is the code i have already:
Sub Order2Invoice()
Sheets("OrderDatabase").Select
Range("B65536").End(xlUp).Offset(1, 0).Select
With ActiveCell
.Value = Orderform!G5.Value
.Offset(0, 1) = Orderform!E10.Value
.Offset(0, 2) = Orderform!E11.Value
.Offset(0, 3) = Orderform!E12.Value
.Offset(0, 4) = Orderform!E13.Value
.Offset(0, 5) = Orderform!E15.Value
.Offset(0, 8) = Orderform!E15.Value
End With
Sheets("Invoice").Select
End Sub
I have copied Row no. 2,4,6 fro this GREEN table and want to paste same date in J and K column (in same row numbers)then how can I do this ?
It should Show like this if I
1 First I filter only Yellow cells
2 then I copy that Filtered cells
3 after that copying that filter cells I did Paste in same rows in J and K column
i could do with:
move data up a row if row above is empty
move data left if column before data is empty
tia
add your top 10 if you like
I am trying to copy and paste values from one column to another on the same sheet
E.g Column A
A1-Red
A2-Blue
A3-Green
A4-Red
If i filter to red and copy cells A1 and A4 and paste into column B, instead of pasting it into cells B1 and B4 it pastes it into B1 and B2...
How do i get it to paste on the same row?
My sheet im working with has thousands of rows, some need to be pasted, others need to be left as they are
I want a macro which will copy all the data from sheet 1 in columns A:C ignoring any blanks
then paste it into the first free cell in column B of sheet 2
I am importing a 20 character text string (from a barcode scanner) to H2. I need to send that data to the next unused row in Column A (after insuring that no matching text currently exists in Column A-no action taken if matching data is found). I can provide a copy of the sheet, along with a description of the project.
View 2 Replies View Relatedformula to make data on same line.On converting data2 is above data 1. I insert a column on left . Need to use mouse right click shortcut delete manually shift cells left and then delete shift cells upto have both data on same line but should be in different cells and same sequence per attached ALSO TO REMOVE "/ -DASH HYPENS.
What I need is formula to move the data2 on same alignment and to delete the two empty rows between both data.
See annexed file for expected results.I have preference to have a formula much more.
In Worksheet A I have hundreds of Rows... Column 2 has a Type in it and not all rows will have a type and then there are various data elements in column 3, 4, 5 and 6
What I would like to do is in a worksheet B have a formula on each of the cells on a row that would look to worksheet A and would find the first row to match the type value in column 2. I would then want to lookup the value of column 3, and 4, and 5 and 6. Then in worksheet B, the next row the formulas in the cells that would also match type and would continue with the NEXT row in worksheet A that matched the type and again retrieve the appropriate cells. It would continue stepping through the rows of worksheet A until I had all of the now displayed in worksheet B
Basically I want to built a subset of worksheet A into worksheet B using the value of the Type column in worksheet A.
I suspect I am going to need to use multiple forumulas nested together in some way to achieve this.
I have a filtered worksheet -WB1 (filtered by Column "B"). I want to count the number of cells or rows in column "B"(Only the filtered ones) of WB1. Copy out that exact number of cells from another workbook(WB2) from the bottom moving up(Column "A") and paste it into WB1 column "I".
WB1 - Count Filtered Cell/Row with reference to Column "B"
WB2 - copy Cell count bottom to top of Column "A"
WB1 - Paste into Column "I"
I am trying to copy one worksheet using the "move/copy" function that is available when you right click a tab name and want to copy the worksheet in the same workbook
The steps I'm using are:
1. Right click the tab name
2. Select Move or Copy,
3. Select Create a Copy
4. Click OK
Doing all of the above does not work. When the new worksheet opens, all columns are the same width. It seems to be stuck on "autofit column width" setting of 8.5. The original worksheet is several columns wide all with different width settings.
I've also used Copy, Paste Special and selected column widths and that does not work either.
my requirement is as follows. I have a school data sheet(data sheet) and i have to filter data based on each school id.I need to pass school id in a different excel sheet(input sheet). So if the school id matches then i have to copy the entire data for tht school and move to to a new sheet.
Input sheet
schoolid
211
321
Data Sheet
Emp No Surname last name schoolid
1 marian chin 211
3 luke mar 211
5 uyure tgt d 321
7 fdsfd fdsfsd 333
so whn the macro is run it should filter for 211 and 321 and move these three rows from data sheet to new output sheet.
I have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
I have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
I want to create a macro to paste some data into the next empty cell. Below is sort of what I need but this show it going to a particular cell, I need it to got to next open cell in the range from say BY3. So next macro run it would copy and paste the data from T3:T9 (always this range) to BZ3 then CA3, CB3 and so on.
[[Sub CopyData()]
'
' CopyData Macro
' Copy The Data To Build Graph
'
[Code]....
Copy and paste data if row in Column N is empty.
Here is my current code
I have the following macro that imports a copy of data into a worksheet. I would like it to paste the data below in first empty row (where column A is empty) instead of A1. I am using Excel 2010.
Sub Update ()
' Import_New_data
'
Range("A1").Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
[Code]....
I am trying to write a macro to do the following: Loop through a range of cells on a worksheet Sheet1 M17:M46 and if there is text in the cell then Copy all the data to the left Of Coumun M in the same row and paste the values to the next open row of a range A17:L46 on another worksheet (sheet2.) Basically the text in column M is an idicator to add the data to an order sheet. If there is no text don't add the data , look in the next row etc.
I'm not sure if this is the way to go
Sub CopyRows()
Worksheets("sheet1").Select
FinalRow = Range("M65536").End(xlUp).Row
' Find the last row of data
' Loop through each row
For x = 2 To FinalRow
' Decide if to copy based on column M
ThisValue = Range("M" & x).Value
' could be any value
If ThisValue = "yes" Then
Worksheets("sheet2").Range("A" & x & ":L" & x).Copy
Worksheets("sheet1").Select
NextRow = Range("A65536").End(xlUp).Row + 1
Range("A" & NextRow).Select
ActiveSheet.PasteSpecial = xlValues
Worksheets("sheet1").Select
End If
Next x
End Sub
I'm never done a macro before and of course I'm very new to excel. I have a worksheet for lessons learned that have multiple sheets for each state. I want to create a macro that every time I enter a new data into a row and hit "Add to summary sheet" and it copy and paste the the next available row in summary sheet.
See the attached file for my workbook : Book1.xlsx
I have a macro that automatically takes data from one sheet, copies it and pastes it on another sheet, but I want it to select the empty column that is to the right of the last column to contain data (so basically the next empty column). What code would I enter into editting my macro to be able to do this please?
Also, one thing I've tried to do with my macro is that when I select the data, it's suppose to select from the first name to the last. When doing the actions for the macro, I use "Ctrl + Shift + Down Arrow Key" to make the selection select the bottom of the list. However, when running the macro, if the list is longer (or shorter), the macro selects that number of cells instead of the action of just going to the bottom of the list. For example, if during the actions of the macro, I recorded using the Ctrl + Shift + Down Arrow Key that 50 cells were selected...next time if I have 60 cells, only 50 are selected, even though I used an action command which should select all the cells in that group (in this case being 60). Is there some code I can add to that so this would work correctly?
In case its required, here is the code from the macro:
i need a method to find the end value in a row (right side) and select the empty cell to its right to paste data in.
problem is the row where this data is may change so using
limit = (row, col).end(XlRight).Col
How can I move data from one worksheet and place in another worksheet in the appropriate column? I exported data from Access to Excel in order but I need to group the data in excel.
View 3 Replies View RelatedI would like to move the current row of data to another sheet when I change a value in the row from an x to an s. I think I could use an If statement, but if you can move data from one worksheet to another, I don't know the syntax to use.
View 9 Replies View RelatedI need a code that will allow me to move data from a worksheet to a worksheet from which I came from. e.g. worksheet "Sheet 6" opens "Sheet 10", then after filling data in "Sheet 10" I need to move this data back to "Sheet 6" in the cells in range "F12 to F56". Please note that the data in "Sheet 10" is in the same range as in "Sheet 6"
View 1 Replies View RelatedI'm looking to automatically move data from my working worksheet, when a particular column states "Won" or "Lost". I'm hoping the entire row of data can be cut, and added to the appropriate sheet, determined by "Won" or "Lost".
View 5 Replies View RelatedI need to do is move a list of data in an excel worksheet to Notepad. The data is 16 numbers long, but the Notepad needs to be left justified to 19 characters. I can't figure out a way to move spaces over to notepad.
View 6 Replies View RelatedError in the code, where I'm trying to copy the data (based on criteria) from one worksheet to another, then delete the data from the first worksheet. In the code (I have complied from this message board) I get an 1004 error "Application-defined or Object-defined error".
Code:
Option Explicit
Sub CopyALColKYes()
Dim NR As Long, c As Range, firstaddress As String
Application.ScreenUpdating = False
NR = Sheets("Completed-Expired").Cells(Rows.Count, 13).End(xlUp).Row + 1
[Code] .........
Is it possible to have a macro compare two wokrsheets and move the totals from one sheet to the other worksheet.
Here are the worksheets: ....
