Converting Two Tables In Different Sheets Into (Pivot?) Table In Another Sheet
May 27, 2014
I have a portfolio of 23 funds and I need to calculate IRR for each one every month.
The problem is that I have dispersed information for each fund.
For instance in sheet CashCallsBD I have a table with the funds cash calls. This table has a first column with the Fund Name then other column with the cash call date, another column with the cash call value. This table may have other columns. One fund may have several cash calls.
In sheet DividendosBD there is a table with some columns that refer to cash distribution movements. The main columns relevant for this case are Fund Name, Date and finally Cash Distribution (signed in red in the attached document)
And then my problem: In order to calculate IRR for each fund I need to create a table (for each fund) that merges and sorts the information of CashCallsBD, Dividendos BD and present market value for each fund and then apply the XIRR function. For each fund this sorted table would have at least 2 columns (date and values).
View 3 Replies
ADVERTISEMENT
Aug 16, 2013
I have a pivot table in the first sheet which includes the field "Date" as a column label.
In the remaining sheets, except for one, there are pivot tables based on the same underlying dataset which also include the field "Date" as a column label.
I would like to adjust the selection (i.e., exclude some dates) from the column label in the first sheet and see if it is possible to make the same adjustments automatically to the pivot tables in the remaining sheets as well.
note that the field "Date" is used as a Column label, i.e., it is not a Report filter.
View 3 Replies
View Related
Jul 25, 2006
I currently have several pivot table that's linked to a single pivot table(let's call it X) in the same workbook. I'm doing this to limit the file size because the data in X comes from a text file that has millions of lines. However, it's such a pain every time I need to update the tables because simply clicking "refresh" does not update those tables that are linked to X with new data. I would have to instruct the wizard in every linked table to point to X every time. I'm trying to write a small program to re-point to X for each of those other pivot tables whenever i refresh data. However, after trying to record the steps to do this I'm still unable to run these
Sub Macro1()
ActiveSheet.PivotTableWizard SourceType:=xlPivotTable, SourceData:= _
"PivotTable1"
End Sub
View 6 Replies
View Related
Sep 5, 2006
Is it possible to create pivot table from another multiple pivot table.
Example: I have two diff pivot table "Income" and "Expense" as well
and I need to preapare new pivot table using with those two pivot table
View 3 Replies
View Related
Mar 5, 2014
I have 12 months worth of data in twelve separate workbooks each with a pivot table, I have copy/moved the pivot table tab from each into one workbook so now I have a workbook that consists of 12 tabs each with a pivot table. What I would like to be able to do is create a summary table with the full years data; where I am running into problems is that each months table has slightly different row and column counts and labels making any formula like =sum([sheet 1 cell a1]+[sheet 2 cell a1]) problematic.
View 3 Replies
View Related
Oct 14, 2003
if there is a way to display a table as column percentages but have the totals as raw numbers.
View 9 Replies
View Related
Jul 11, 2006
I've just set up a workbook full of pivot tables linked to an access database. The book will be used by several individuals interested in both the statistics presented in the tables and in the details underlying them. My concern is the accumulation of the extraneous sheets generated by drilling down to details. Is there any code I could use that would delete these sheets as soon as the user leaves them?
View 4 Replies
View Related
Dec 21, 2011
a query as i'm not too good with vba codes but can record macros but not for what i need.
I have got a pivot table which has about 200 rows. In Column A is the provider and in column B is the total number of people.
I now need to create a sheet per provider and the manual way to do is to double-click on the numbers.
Is there a code that would this automatically?
View 9 Replies
View Related
Oct 29, 2013
I am trying to solve in VBA how to create pivot tables in new sheets using objects instead of relying on the sheetcounter, which errors out.
I found an old Tip on Mr. Excel: Excel Create and name a new worksheet with VBA
But I can't figure out how to apply the object to the rest of the script. Here is what I have so far:
Sub Macro2()
'
' Macro2 Macro
'
Dim WS As Worksheet
Set WS = Sheets.Add
'
[Code]....
View 1 Replies
View Related
Mar 9, 2014
I am trying to generate several pivot tables from one data source table. I have successfully created my first pivot table (A date field, and a water storage facility level reading) and subsequently a graph from this. I have worked out that I need to group my dates as I am supplied a daily reading, but only need monthly average. All worked great.
Now i need to create more pivot tables and graphs. The next one I want is to create one grouped by years. But when I create this new pivot table and change the grouping of the date field to yearly, it also changes the grouping on my first pivot table, which is undoing my work.How to tell excel that these pivots are independent, and I don't want them changing in unison? See screen grab of my source data and where I am up to...
Microsoft Excel - 401027_0100.00_0221.00.csv_2014-03-10_11-41-35.jpg
View 1 Replies
View Related
Jun 9, 2014
I have an excel file that contains around 8 sheets, each have a table that contains data. I want 2 master sheets that can automatically update itself if i enter data in any 1 of the 8 sheets.
master sheet 1 = summarized sheet that contains lesser columns with only major details.
master sheet 2 = contains all columns of all the 8 sheets.
the 8 sheets have unique names and i want those names to be in a drop down list in master sheet (summarized ) so i can select which ever sheet i want summary from.
Also i used tables for filtering data as i find it easier to track records from filter.
View 2 Replies
View Related
Apr 26, 2012
Recently, the boss showed me a Pivot table & chart, which consists of a list of about 30 user names in the first column. The row headings were the different items they purchased from a vending machine. & when he clicked on any name in the first column, this created a new sheet, renamed with users name, with a small table of results showing what that person purchased.
Problem is, none of us can figure out how to do this. I have created a new Pivot table & chart exactly like the original, but I cannot get the smaller sheet to generate. (Excel 2010)
View 3 Replies
View Related
Jan 15, 2014
I am trying to create a single pivot table using data from multiple sheets (one per month). I am trying to summarise the headcounts (count of assignment number) by month in a single table and then be able to select single months/areas or combination of months/areas in the same way as a single sheet pivot table. I have managed to get the table part way there but it’s not counting the assignment number and my Jan data is not appearing (see attached). How do I fix this? (I have only used 5 months of year in example due to the large file size) Alternatively is there a different or better way to this other than pivot table?
View 2 Replies
View Related
Apr 23, 2008
I am trying to create a pivot table using multiple sheets. I looking for some code that will replace the "consolidated ranges" in the Pivot Table Wizard. I am looking for code because I am writing a macro that will create a different number of worksheets in the Workfile, depending on which dataset I use. i.e File 1 may have 75 worksheets, whereas File 2 may have 120 worksheets. '
The ranges on each of the worksheets will be the same. Range("A2:Av48")
View 9 Replies
View Related
Feb 25, 2009
I have a workbook that reports data on a daily basis within a month. I receive data daily from a different workbook and import the data for the day in its correct worksheet which has functions that automatically calculate everything I need, which then gets collected from a central worksheet which accumulates the "Total".
However, I have recently added 2 new pivot tables to my analysis, and apparently when i copy/paste the pivot tables to each new sheet, the data source is references the original sheet where the pivot tables come from.
I tried doing a dynamic name range, and that states the worksheet name in its reference as well.
How can I make a Pivot Table, gather the information from the same range $A$1:$J$5000, but only for the sheet in which the Pivot Table lies.
The sheets are labeled by the day of the month.
So, data for February 1, 2009 is worksheet "1"
February 14, 2009 is "14"
without the ""
View 9 Replies
View Related
May 9, 2009
I got a brilliant bit of code (which works perfectly) from Bill Jelens "Excel Gurus gone Wild" which loops through all worksheets in the activeworkbook and consolidates these worksheets into one pivot table, this example creates the pivot in a new workbook, what I would really like to do is add a new sheet and create the pivot in the active workbook where I am pulling the data from can anybody help me to modify the code?
I have not added the code yet to generate the pivot
Code below:
Option Explicit
Sub bob()
Dim i As Long
Dim arSQL() As String
Dim objPivotCache As PivotCache
Dim objRS As Object
Dim wbkNew As Workbook
Dim wks As Worksheet
With ActiveWorkbook
ReDim arSQL(1 To .Worksheets.Count)
For Each wks In .Worksheets
Do Until wks.Name = ""..............
View 9 Replies
View Related
Aug 28, 2008
I have pivot tables in diff pages
im trying to make a button to reset all the fields in all the pivot tables..
i tried recording a macro to do this but it only works for page fields..
it wont work for the column fields.. act, adopt and check are page fields at the top... region is a column field ... goto_AQcheck is a macro to switch to that sheet which is assigned to another button....
this isthe code it gave:
View 13 Replies
View Related
Jan 30, 2014
Excel 2007.
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday
Dig
Drive
Dave
4
5
Bill
2
7
Tuesday
Dig
Drive
Dave
2
7
Bill
8
1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig
Drive
Dave
6
12
Bill
10
8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row
Column
Value
Bill
Dig
2
Bill
Dig
8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
View 1 Replies
View Related
May 24, 2008
My goal is to macro the creation of pivot tables into seperate worksheets based on each particular record in the "Office" (location). Ultimately, I will apply an email macro to send out each pivot table (and source data if necessary) to various recipients. I need to make sure that each recipient of a pivot table is limited to only drill into the detail for their particular "Office" and not able to view other location's information in the Source Data worksheet--is this possible, or do I need to create separate source data worksheets for each Office's pivot table in order to limit the viewing?
Items I need guidance on:
Creating a macro to breakout pivot tables into seperate worksheets based on "Office" locationPlease advise on how I can secure Pivot Tables so that the user can only drill into the information originally presented in the pivot table they receive and will not be allowed to view all of the source data.
Please find attached a file with my source data and an example of a pivot table for one of the Office locations (Chicago).
View 9 Replies
View Related
Dec 14, 2013
for my school project, I am right now doing time tracking for all of my activities throughout the day with excel. Here is basically what I am doing: For everything I do, I record and put in start time and end time for the activity.(I use simple formula to subtract these twos) If my day goes on like study, break, study, meal, study, break and each activity takes one hour for each, I have total of 3 hours studying, 2 hours taking break and one hour for meal. I am using pivot table to show all totals for each activity.
Pivot table is working best as far as my knowledge goes as I can choose and look up total of multiple activity combined. The problem here is I am making one sheet per a day and I need to continue this for three months. (So that seems like 90 worksheet). What I was thinking is I make Sheet 1 as master sheet. Then, copy and paste the entire sheet for 90 sheets assuming all formulas including pivot table go along with them. then, when I put in new data to other sheet,magic happens and values in pivot tables will change relatively after refresh. You might be probably laughing hard at me right now. I know..I tried it for like 3 sheets. Simple formula to subtract endtime and start time still work accordingly with new data. But, Pivotal table is playing dead at all.
I researched and found that that might be problem with reference and absolute cell reference thingy. ( to make pivotal table work for different worksheet). All the cells used ( including column and row ) will be entirely the same for all worksheets. The only difference aka problem is different sheet. I want to use sheet 1 as a template and copy it down to next 90 sheets taking all contents except data. Is there anyway I can copy and paste the whole template to another 90 sheets while making pivot table work and calculate and update itself according to relative data from each own worksheet? I use excel 2007 btw
View 5 Replies
View Related
Jan 21, 2013
I have a single workbook with multiple worksheets. Each worksheet has a different pivot table displaying a different view of the data. Each pivot table uses the same source data at worksheet1.
Each week i add new data to the end of the source data, which means that I need change the source data reference separately in each pivot table to update each pivot table view to include the new data. This is laborious as there are quite a few pivot tables.
Was wondering if there is some way of changing the pivot table source data reference on all pivot tables at the same time.
View 4 Replies
View Related
Aug 9, 2012
I have 29 excel files with some number of worksheets from 1 to 4. The name of the worksheets are the same in all the spreadsheets. Then I've a got a pivot table. I have to compare some data (3 columns) from the pivot table to the numbers from all these sheets from 29 excel files.
How to do it in a most efficient way?
View 4 Replies
View Related
Jun 19, 2008
I've got 4 pivot tables (all derived from the same base data) on 4 separate worksheets. I've been able to (with this help of this site) to use VBA to hide pivot items on all of these sheets using a list on a user form. Hide/Show Pivot Table Field Items. Hide Pivot Table Fields Pivot Items by Criteria
I now need to be able to show all the pivot items on only 3 of the 4 pivot tables, with the 4th pivot table being left untouched. For ease assume that my sheets are sheet1, sheet2, sheet3, and sheet4. The tables I wish to update are on sheet2, sheet3 and sheet4. The pivot table on each sheet is called "PivotTable4" and the pivot item is called "Business". The pivot item contains 12 business names (Business1, Business2 etc etc)
Is there an easy way of doing this? I've spent the day looking through the internet and various "Dummies" books but with little success, I fear that I'm obviously below even Dummy level
View 5 Replies
View Related
Mar 19, 2013
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
View 3 Replies
View Related
Aug 8, 2009
When I creating a Pivot Table Report on a different sheet. I have attached the Stock Report, where I have created a Button at the top to create the report, but the worksheet name is the default Excel name rather than the one that I want (in my case the name of the new sheet should be "Admin".
View 3 Replies
View Related
Mar 18, 2009
I'm getting a 1004 run-time error when creating a pivot table.
I believe this happens because I'm creating it in a hidden sheet. When I unhide it no errors occur.
View 2 Replies
View Related
Dec 19, 2011
I am looking to hide or delete the extra worksheet that is created when creating a Pivot table Macro. When I create a Pivot Table, it creates Sheet1 with it blank.
Is there a code that I can add to hide or delete the blank worksheet (sheet1)? Each workbook that the macro is distubuted in has a different workbook name, ex South_Report.XLSM, West_Report.XLSM.
View 4 Replies
View Related
Aug 29, 2012
I would like to know if it's possible to copy a pivot table from one sheet and paste it into in another sheet such that two pivot tables are not linked i.e. if I create a calculated item in pivot table it doesn't show as an item in another. If yes, how could I do that?
View 1 Replies
View Related
Jul 29, 2014
I'm trying to copy a certain cell range from a particular row of a pivot table to another sheet, in a loop but I do not successfully do the paste. There's no error, just no data gets pasted.
In my code currently i have:
Code:
Set Report = ActiveWorkbook.Sheets("Report")
Set Pivot = ActiveWorkbook.Sheets("Pivot").PivotTables(1)
dim size = Pivot.TableRange2.Rows.Count
for i =2 to size -1
Set currentRow = Pivot.TableRange2.Rows(i)
currentRow.Range(currentRow.Cells(1, 2), currentRow.Cells(1, 7)).Copy
Sheets("Report").Activate
ActiveSheet.Range("C" & 4 + i & ":H" & 4+ i).Select
Selection.Paste
next
Now, what does work if i select and paste the whole pivot row, but i don't want this. I've tried also with just referencing the Pivot table cells but also pasted nothing.
View 1 Replies
View Related
Dec 8, 2011
I am trying to create a pivot table on a worksheet that already exists using VBA, but I am getting an error (Invalid procedure call or argument).
Code:
' Create the pivot table on a new tab
ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:= _
source_data).CreatePivotTable _
TableDestination:="DJG Clients with Multiple Fee E", TableName:="PT_ClientsMultipleFeeEarners", DefaultVersion:= _
xlPivotTableVersion10
ActiveSheet.PivotTableWizard TableDestination:=ActiveSheet.Cells(3, 1)
But if I just send the pivot table to a new sheet it works fine -
Code:
TableDestination:=""
View 2 Replies
View Related
