Prevent Cell Format Replicating Itself
Mar 7, 2008
see the attached "sample.xls". In cell "D1", after I typed in some text and pressed enter, the cell format changed. It only happened for texts not for numbers. There's no macro or conditional format that I could find.
View 2 Replies
ADVERTISEMENT
Jul 19, 2014
I'm using Excel 2010. Is there any solution which cover requirements given below.
1) I've converted a range in to table format (using Format as Table)
2) Need to Prevent pasting on data validation cell.
3) Need to Prevent change in cell format after pasting data (other than data validation cells as mentioned above) from same workbook or other workbook
4) Need to insert row in the table as per requirement.
View 3 Replies
View Related
Aug 1, 2008
I have been struggling with my Excel 07 Date format. Nearly every time I perform a calculation, enter in a value etc in a spreadsheet my answer is returned as a date. So for example if I enter in a cell: = 5 - 4. I get the answer "1-Jan-1900" instead of 1. I have to manually set the formats to general or number if I want the correct format. The setting seems to be the default one and occurs for all workbooks I open. What can I do to change this.
View 5 Replies
View Related
Aug 7, 2006
I have some data which I need to replicate, the data is as follows:-
Club : Name : Competition : Division : labels per round : number of rounds
this is in the six columns as above and, perhaps, 900 rows.
What I need to do is to read each record in turn and replicate it by
a: the number of "labels per round" then
b: the number of rounds, incrementing the round number from 1 to 10 in the process.
This would be written to another worksheet.
I have tried to come up with some VBA to do this, but even this simple task would appear to be beyond me in the timescale I have to get it sorted. how to code this or point me to where I can find this out?
View 8 Replies
View Related
Dec 17, 2008
I got a workbook containing a worksheet called APheb1.
I would like to create a macro that would replicate this worksheet and rename it APheb2, APheb3 etc... till a number i specify. For example if i specify 90, then it would replicate APheb1 90 times till APheb90.
I have recorded a macro that replicates the file but i cannot find a solution for the renaming part.
View 4 Replies
View Related
Mar 20, 2014
I have this excel template which i am working on and its a bit kind of complex linking several sheets together.
My problem now is in the Junior STUDENTS INPUT.xls
the 2nd term report has to be replicated 150 times following the patter of the one already done linking all necessary cells as the first one,
View 5 Replies
View Related
Nov 15, 2011
Is it possible to use a formula to replicate primary and secondary lookup in SQL and is it possible to retrieve data from Excel spreadsheets using SQL.
View 1 Replies
View Related
Mar 27, 2013
Is there a way to disable the Convert button on the File menu and also to limit the Save As file types? I have a workbook that I maintain in Office 2003 that gets filled out by customers and returned. When a user with a newer version of Excel converts the file, it doesn't function properly when I go open it. I believe the conversion issue has to do with Active X Controls, but I'm using them to do some things that won't work with Forms Controls, so replacing them would be a last resort. Also, upgrading Office isn't an option at this point.
View 1 Replies
View Related
Aug 5, 2007
The following block of code is evaluating the term in the array, if it exists and the value in col. M is a non integer, (which what I am testing for are fractions) then format the cell to a fraction number format.
That is ok, except it is changing the numberformat on text terms. I want it only to change the numberformat on numeric values.
I added the function Isnumeric to this line:
Isnumeric(cells(i, "M").value) Int(cells(i, "M").value)
which I thought would only evaluate numeric cells only, but this was unsuccessful.
Original Code: Unedited.
For i = 4 To LRowf
For Each Item In Array("HAT", "FTWR", "BOOT", "BOOTG", "BOOTY", "HWRISR", "HWBLTS")
On Error Resume Next
If (Cells(i, "F").Value = Item Or Cells(i, "G").Value = Item) And _
Cells(i, "M").Value Int(Cells(i, "M").Value) Then
Cells(i, "M").NumberFormat = "# ?/?"
On Error GoTo 0
Exit For
'End If
End If
Next Item
Next i
View 9 Replies
View Related
Mar 18, 2014
i have a challenge i need to prevent the value is more than A1 cell value in B1.
Example: if A1 value is 10 then unable to enter morethan 10 in B1 cell.
View 3 Replies
View Related
Jun 15, 2009
I want to allow users to select a cell in a column, but not allow them to change the contents of the cell. Also, don't want to allow them to select all the cells on the sheet.
I'm guessing that I need to use the Change event, and restore the contents back to what they were before the change.
Is there a better way to do this?
View 10 Replies
View Related
Sep 3, 2008
Am trying to create a simple spreadsheet with some multiplication functions on it. Using this example:
Cell A1 = 5 (multiplicand) x
Cell A2 = 10 (multiplier) =
Cell A3 = 50 (product)
All is well providing I have a number value in cells A1 and A2. When I don't, I would like them to remain blank, as well as A3, the product. The problem I face is when I remove the values in either A1 or A2, what's displayed in A3 turns to the word - #VALUE!. Which also shows up on the printed page.
My question is, like removing the checkmark for "zero values" under tools and options to prevent the "0"'s from being displayed, is there a way of preventing the word "#VALUE!" from being displayed when the values for the multiplicand and/or multiplier have been removed?
View 9 Replies
View Related
Dec 18, 2008
How can you prevent a cell which contains a validation list from being dragged?
View 9 Replies
View Related
Oct 29, 2008
I have a worksheet with multiple entry boxes in a row. Depending on the value in one row, another row will either yield the result from a formula, or remain blank, and this cell needs to be locked. I was able to do this by first putting the formula into the destination cell, and then using custom data validation that says the cell value = "". So this prevents anyone from typing in that cell, no matter if it yields the formula result or must stay blank. What it doesn't protect against is someone deleting the contents of the cell. The reason I don't want to protect the cell is because I want people to be able to highlight the whole row past that cell and delete it all at once. So either using Data Validation, a formula, or VB programming I need to not allow someone to do ANYTHING to that cell, even delete the contents, without locking the cell. Hopefully it can be done, thanks!
For example, if E17 = "X", then K17 = INPUT!$M$28*J17. If E17 <> "X" then K17 is blank. Either way, I don't want any typing or deleting of K17. This applies for range K17:K91, and corresponding E17:E91.
View 14 Replies
View Related
Oct 22, 2013
If A1 = "Yes"
Then don't allow input into cells B1 and C1. Or delete anything in B1 and C1 perhaps?
Cell A1 would be the result of a formula
How would I go about creating something like the above?
View 2 Replies
View Related
Jan 16, 2014
how can I prevent an entry in a cell even without formula lets say cells B1 , C1 , D 1 , E1
I want to prevent an entry in these cell and if you try an error message will display
View 1 Replies
View Related
Jun 25, 2013
How can I stop the overlapping cells?
View 2 Replies
View Related
Oct 15, 2007
Is there any neat little way of preventing a character say '=' from been entered in a cell, kinda similar to the validation but for a 'dont allow' function.
View 14 Replies
View Related
May 7, 2009
I have one main tab which I pull data from other various tabs. To match data the data, I create a "common unique ID", in other words I create a column on each tab and connect various cells with the ampersand.
So in each of the various tabs (and the main tab), I'll have a column with something like =A2&B2&C3
If the "unique ID" matches between the tabs it will pull back the desired phrase, or it will be left blank. (Just using an =IF(ISNA) formula)
If you have followed so far, on my main tab, I have a column for each of the various tabs. The information I am trying to match could be on any of the tabs, so I need a column using an =IF(ISNA) formula to attempt to match each tab. So, on the main tab, there are several columns which might have the phrase I am looking for. I use another ampersand function to add those columns. My problem is that occaisionally, what I am looking for is on multiple tabs. So, if I am normally pulling the phrase "Pending Loans Report" when a match is made, if it is on two tabs, the cell will add it twice "Pending Loans ReportPending Loans Report"
I realize this is confusing, so I attached a spreadsheet. The "main" tab I was referring to is sheet1. I really simplified it down to post here, but I think the main idea of my problem is still evident. The problem is line 15. Note how column M has "Pending Loans ReportPending Loans Report" - I'd like it to only say this phrase once. The macro pastes special values at the end, but I've highlighted some cells in red which show the formulas I used for that column. Columns N, O, P, Q, etc. all have virtually the same formula.
View 6 Replies
View Related
Jan 11, 2007
I would like to write a macro that performs the following function:
I have a value in cell A1
In cell A2, I have the formula "=A1"
I want to make it so that cell A2 can never be directly changed; the only way to change the value in A2 is by changing A1. A2 should always equal A1.
I want a message box to pop up and alert the user whenever they attempt to modify A2, instructing them that if they wish to change A2, they have to change A1.
I had written this macro, and it kinda does the trick:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("a2") Range("a1") Then
MsgBox "text goes here"
Range("a2").Value = Range("a1")
End If
End Sub
When I attempt to change cell A2, I get the MsgBox popup and it works how I want it to. However, when I alter cell A1, I get the same popup before cell A2 updates (to be precise, the popup occurs after I click another cell). I would like this to be immediate and without a MsgBox.
View 9 Replies
View Related
Apr 29, 2008
I have a macro that is run by clicking on a macro button. The macro copies the data from Sheet1 and pastes it in another sheet, Sheet2. I added some conditional formatting that colors certain cells red if others are blank on Sheet1. I would like to add some code to my macro that will not allow it to copy and paste from sheet1 to sheet2 if there are any red cells in the range.
View 9 Replies
View Related
Feb 4, 2010
i have data in a cell that i must view in the sheet and in the print area
but do not want it to print
View 9 Replies
View Related
May 18, 2007
I'm creating a maths workbook in Excel. I want the user to workout the answer in his/her head and enter the answer into Excel. The only problem is, of course, that there is nothing stopping a user from simply typing a formula to obtain the answer! I have tried all data validation, apart from Custom which I can't figure out. Is there a way to prevent a user entering a formula on a worksheet?
View 5 Replies
View Related
Sep 10, 2007
I would like a macro which disables the close function of a worksheet if a particular cell or has not being filled out?
View 3 Replies
View Related
Mar 23, 2014
I tried to solve above problem using Data Validation formula. Data validation does not work if somebody copy paste the duplicate values,it works when somebody types duplicate values in next column. So if I want to enter lot of urls to a column then it is completely impossible to type so must have to copy paste from the browser. I have attached a sample sheet, howl to solve this problem either using formula or using Data validation in sample 1 and sample 2 respectively.
View 1 Replies
View Related
Jun 22, 2009
Using 2003 - Is it possible to prevent cell data entry automatically creating a hyperlink for email/web url's. Using
View 4 Replies
View Related
Jul 11, 2009
I have one issue with my protected worksheet. Some locked cell contents are linked to cell contents located in another sheet. When I double clicked on these cells, a warning window poped up but also opened the sheet in which the corresponding cell is located. This is quite annoying to have to go back to the former sheet. How can I prevent it ?
View 3 Replies
View Related
Jul 30, 2009
I've got an issue where Formulas Referencing Cells on another sheet are getting changed automatically to refer the the moved cell data. The formulas on a sheet (2) refer to specific cells on sheet (1) within my workbook. I update Sheet(1) data with a macro. When sheet (1) updates, the present data gets shifted to the right.
In other words, I need to prevent the formulas from changing to reference the moved data values and keep referencing the initial cell with the new values. xample of change that occurs with update:
Correct:
View 3 Replies
View Related
Jan 18, 2010
On the uploaded workbook, Daily Nutrition Worksheet. How do I clear all the data to start fresh without deleting all the formula?
View 2 Replies
View Related
Apr 27, 2007
I am in need of 2 validation macros (formulas) to enter into the validation criteria formula box when creating a custom validation.
1. A formula that will generate an error if there is a space in the text entry. Example:060107_Halo3CG prev.mpg would be an invalid entry due to the space after CG.
2. The same formula as above but this one also needs a 50 character limit added to the criteria.
View 5 Replies
View Related