1.- I have in any cell the name of the month ( example :A1 )
2.- In other cell I have to put this words . . " YES" , ( example B02).
3.- I need the cell "A1" fill with a color
a) if in the cell "B2" dont have any word... then FILL the cell "A1" with Yellow color
b) bu if in the cell "B2" I put the word "YES" then do nothing with the cell "A1"
Im working on a large workbook with multiple worksheets. Each of these
worksheets has a large amount of data relating to training records. In
particular, the date that an employees certification is due to expire
(eg: 01/02/2007 or 31/09/2009 etc)...(im also in Australia so my date formats may be different).
I need to color code these records with the below logic, eg:
If Cell Date is <Today() = Red Text or Cell
If Cell Date is <18months from Today()+1 = Yellow Text or Cell
If Cell Date is >18months from Today() = No change - leave white
I have basic VBA knowledge, but will be able to work my way through
some of the code that is posted.
It's also key to note that there are multiple 'Blank' and 'Text' Cells
in these worksheets. I only want to apply this code to a cell if it is
populated with a date, is this possible ?? (eg: i only want to change
the color of the dates listed, not the other cells with text and single
numbers).
I have played around with the Conditional Formatting but i will need
more than 3 conditions in the future. I've also attached a small
screenshot of the data for your convenience.
How would I make cells in column A to C be highlighted yellow, of which is 0.02 in value be higher than in compared with the adjacent cell in column D ? It is easy to use condition format function to setup the conditions in 1 row. The problem is there are thousands rows in the sheet(of which represents an individual file by each row), and need to have the conditioning format applied on each row independently. How can it be done w/o the need to have format painter applied line by line, of which is a very time consuming.
View 6 Replies View RelatedI wish to perform different actions depending on whether certain errors are present in a cell and I can't figure out how to do it.
Attempt (within some For loop):
othCell = ActiveCell.Offset(-95 - counter, 0)
If othCell = CVErr(xlErrNum) Then conditioncount = 0
This generates a "type mismatch" error. I also tried othCell.value in place of othCell on the second line; I don't really follow the distinction in usage for "value". I've also attempted this with Error 2036 in place of CVErr(xlErrNum). I don't know much at all about VBA!
I wish to set 2 different cases (good and normal sales) for a list of data.
During good sales
- fruits can be sold within 4 hours
- Fruits sold off during peak season (Definition of peak season: 2 calendar days before or on public holiday or 10 days before 31st May)
- < 2 fruits per type
Date of public holiday for example: 1 Jan 2014, 18 Apr 2014, 1 May 2014
For normal sales
- fruits only able to sell of the next day
- Sell of on non-peak season
- > 2 fruits per type
Sample file attached.
I am trying to build conditioning formats for a Financial template.. This is my formula
'=IF(c21<0.1,"RED",IF(c21<-0.01,"BLACK",IF(c21<1,"YELLOW","GREEN")))
It should display the following. I would like to use the icon sets that are color coded. I seem to have some error or overlaps.
GREEN = On track
³1.0
YELLOW = Slightly behind schedule/budget
³0.85 but <1.0
RED = Needs immediate attention
³0.65 but <0.85
BLACK = Needs to be killed or restored
<0.65
I have a column in a spreadsheet that tells me when we ask for a check. I would like to take another column which has the date of when we receive the check to change colors based on whether it is within 30 days of the "ask for check" column and then another color if it is over 30 days. Let me try to do an example below:
ask for check Date Received
1-10-12 1-30-12 would be blue because it before 30 days
1-1-12 3-1-12 Would be red becaue its over
I have , for example, 3 values (1, 2 and 3) in column D which is 10,000 rows long.
Is there a formula that will colour part of each row (say C1 - F1) in a different colour each time where there is a match to value 1, 2 or 3?
Is there any way I can use conditioning formatting on datapoints in a graph, so that if certain points meet the criteria they will appear with another symbol?
Suppose I would like to change symbol on the datapoints exceeding the value 200 in this graph: Graph.jpg
Can I do that?
Summary of performance of various products against target is as follows,
Product vs Target
Color Code
Result
CH4OH
Green
1.0
[Code] ........
I need the final result automated as follows,
If 2 green of the 4 products, then final result Gree
If 2 Amber of the 4 products, then final result amber
If 2 Red of the 4 products, final result Red
Is there a way to automate this?
I am trying to use VBA in Excel 2007 to change bar chart series colors. I have found a few posts that link it to a cell background, but I'm struggling to find one that does the font color.
It would be great if I could change the bar chart series to match the color of the text in the A column, so that if I highlighted the value in A1 and changed the text color to orange for whatever reason, the chart updates the value of 1.2 to an orange bar (see below).
T. A1 B1
Sample 1 1.2
Sample 2 2.1
Sample 3 1.7
Sample 4 5.6
I have a range of cells that change colors with conditional formats based on the cell value from high to low. I would like to link the cell color to an object such as a circle or rectangle. When the cell value changes along with the conditional format, the color of the object will also change.
View 3 Replies View RelatedI have got a userform with lots of controls,
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
I'm trying to add a textbox at the current position (selected cell) with a set size, fill color, and border color. I found this: http://msdn.microsoft.com/en-us/libr...8(VS.80).aspx:
View 2 Replies View RelatedThis is probably elementary, but I'm struggling and would appreciate any help as I have very little excel VBA experience to draw from.
I have assembled code which changes the cell color based on a value change in Column A. Column A will contain many different groups of repeating values. This code works well and and I have been able to figure out how to limit the number of colors to only 2. The end result is each set of similar values in column A is visually grouped by one of two alternating colors.
The number rows in the data set is variable as the data set is extracted from SAP. The number of columns is fixed.
What I want to do now is set the cell color in columns B through F the same color that was assigned to the row in column A. So if cell A3 is set to colorindex = 6, then I want to set the range of cells B3 to E3 to the same color.
Here is the code I am using to set the color of the cells in Column A:
I would like to be able to change the color of a cell in V4:AB31 and have the formula in AM10:AM13 automatically calculate the new result. As it is now the user has to press Ctrl ALT f9 for the formula to recalculate.
View 7 Replies View RelatedI have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
View 3 Replies View RelatedI have font color white in blank cells in column E and I (from row 5 to row 245) so the visitors will not see the text. If any of these cells become yellow (color code is 6), the font color will become black so visitors can see the text alot far better than white. I've tried this code myself after this post but nothing happen
View 4 Replies View RelatedI have various row cells in column (F) filled with the color Green. And corresponding text in Column G. How can I change the text of that particular row to white.
i.e.: if any cell in column F is Green, change the text color of that row in Column G to white?
if it actually possible to colour data points depending on the colour of the cell of the data it refers to? if not is it possible to colour it any other way
i have uneven amounts of data for weach month but still want the months to be displayed, this is the best way i can think of of doing this
I am looking for a very simple script that will achieve the following:
On the clicking of a button, Select and shade in a cell yellow, delete the yellow shading of the previous cell. The shading & selection should move up a column of cells, 1 at a time, in the following order:
From B10 to B9, then B9 to B8, B8 to B7 etc until the selection and shading is at B2. Once it is at B2 subsequent clicks will simply keep it at B2 (the top). Thus after 8 clicks the shading & selection should travel from B10 to B2, with only 1 cell being shaded yellow and selected at any one time.
I've reached a problem with colors in Excel: need to convert cell color (get from .Interior.ColorIndex property) into RGB value (to set ForeColor of the button). How can I make it?
View 8 Replies View RelatedI have set up a timetable for a dyslexic student and subjects need to be colour coded i have a full page and a mini timetable to filled in.
An example... I want to have excel automaticly change cell A1 to the background colour of e1 e1's cell color is defined by using vlookup and getting the colour of the cell that is to the right of it
a1 = cell colour of e1
e1 = the cell colour of
VLOOKUP(c1,a10:a20,2,TRUE)
I would like to add a date to one cell (say A6) and have this do two things:
#1) this would add "Closed" to a given cell such a A5.
#2) and this would add a color to a group of cells like A1 through A8.
I have an Excel 2010 spreadsheet consisting of many worksheets (20 or so). Each of these worksheets contain detail level data regarding different projects. One of the columns in these worksheets is the 'Status' column (column F). There is conditional formatting on this column where if the text is 'G' then change background to a green color, 'Y'=yellow, 'R'=Red and 'U'=Grey.
The first worksheet is a summary sheet that I would like to pull information from each of the detail worksheet's columns B, D, E, G and H if the status column (Column F) is 'R' or 'Y'.
The number of rows in the detail worksheet can change each week (as few as 0 and as many as 100)
I'm a business/application consultant for ERP software, and generally pretty solid when it comes to excel. However, I've come across a question for a personal sheet that I can't seem to solve.
In my personal budget worksheet, I'd like to set a budget on a cell-by-cell basis. When the budget is hit, I'd like the text color (or cell color) to change.
I.E. Cell D14 has a budget of $200. When I enter $200 in the cell, the text turns from black to red. I've searched through google with no luck. I have mildly searched this forum, but haven't found my direct answer - I have come pretty close though, in other languages
I have a spread sheet and I want to conditionally format rows to be a certain color. That part I'm fine with. But I don't want them to be a set color. I have a "key" of different colored cells that I want to be the fill colors of the formatting. The ultimate goal is that for example the key looked like this
red
blue
yellow
green
then the rows I had would be formatted as red, blue, yellow, and green. But if you were to go into the key and change the first cell from red to purple, then the rows would become formatted as purple, blue, yellow, and green. Obviously I can copy formating by hand using the format painter, but I want it to update automatically.
I have two columns. In column B is the date of "last check". I column A is the date of "next check". I would like to have cell A2 in yellow color 334 days after the date entered in cell A3 and than in red color 365 days after the date entered in cell A3. Same thing for cell B2 related to date entered in cell B3. Yellow color in cells announces that check will expire within 30 days and red color that check has been expired.
View 1 Replies View RelatedI am currently using this Formula to Search a table on sheet 2 (Tabelle2) and copy the date in the relevent cell (Cells) into the correct cell on Sheet 1 (Master Sheet).
[Code] ..........
Used in cells E10:AZ30 and E33:AZ46
This works perfectly and is the formula behind all relevent cells in Sheet 1.
I would like to keep this but to add that it also copies the background color of the cell in Sheet 2 to the cell in sheet 1.
If i can Bring this Formula into VBA and add the color changing part, It must only work on the cells listed above..
I would like to accomplish 2 things in my Excel 2010 spreadsheet by click a cell which already has a number and formatting in it.
1. How do I change the color of the cell, the color of the number in it, and the border around it. (Make it look like I just pressed a button by clicking it.)
2. At the same time have the text in different cell and the number in the selected cell appear in another different cell. (Text in a different cell = A , and the number in the selected cell = 23, the value in the resulting cell be "A 23") Everything I would like to happen at the same time by clicking the selected cell. I would also like this to be done several times by clicking different cells and not changing the previously selected cells.