I'm trying to get a random sequence of numbers e.g. 1-20 so that no number is the same i.e. no number appears twice.
I used Int(20 * Rnd + 1) + 1 but this gives me same numbers. Any ideas how i can do that?
I have list of dollar amounts given to me and a general ledger sum which some of those in the list must equal. How can I determine which of these amounts will equal a given ledger total?
View 12 Replies View RelatedI have three workers for which I am counting the data from using a countas formula. The cells are A1,B1,C1 and I want to highlight in another formula to the right if these three values do not equal each other, I have tried and if formula referencing each of the combinations of the compares however it does not work in the desired fashion.
View 3 Replies View RelatedIf I have A1 = 1, A2 = 3, A3 = 5, A4 = 7, and A5 = 9 in column A, Would someone know how to get the combination of numbers in column A that equal 13, or 24 for example?
View 9 Replies View RelatedI have a range of values in a1:f500 the values are all numbers between 1-25. I then have a value in cell h1. what i need to do is find all numbers that equal to 9 in the range a1:f500 and replace all these 9's with the formula =$h$1 so that i can simply change the values in the range a1:f500 by changing the value to say 12 in cell h1. could someone please text me the vba code that needs to be entered for sheet 1?
View 9 Replies View RelatedI have done is created an Officer Evaluation Form in Word for my Police Chief and the Scores for the different observations are: N/A, 1, 2, 3, 4 and 5. If for example there are 4 observations and one of the observations is "N/A" for not applicable or not observed and the rest are all 5's I want the formula to ignore the field(s) with the N/A and still come up with an average of 5. The way I have it set up now which is: =AVERAGE(KOW1,KOW2,KOW3,KOW4) it comes up with an average of 3 when I put a N/A in field KOW1 and all 5's in KOW2-KOW4.
View 3 Replies View RelatedI have a list of 600 figures (this may vary) but i need a formula that will look a one particular figure in this list and return if it is one of 5 equal groups. e.g in this example the lowest 125 figures in numeric order would be in group 1 up to the highest 125 figures would be in group 5.
I realise if I limit it to 4 groups then i could use the 'quartile' functions but i am stuck with 5 groups.
I would like to create a formula that will sort the numbers in column B, there are also equal numbers in this column
The difficult part is that there is text in column A, and is linked to the numbers
So if numbers are sorted the names should be sorted in the same way as well.
Is there anyway to use Excel to determine which of a set of numbers equals a total? I encounter this issue when dealing with accounts receivable. We receive payments with no details on what is being paid. I have a list of open items and a total being paid. I would like to have Excel determine which combination of invoices can be added together to match the payment.
View 4 Replies View RelatedHow do I randomize rows in Excel?
View 5 Replies View RelatedThis is a follow-on to a great solution provided by Shg and Rylo. Here is the link. http://www.excelforum.com/excel-prog...new-sheet.html
My users have run in to an interesting issue with the file. Each time the files opens it has the same 5 questions selected. What I need the code to do is randomize the questions each time the sheet is opened. Basically, the users seem to have a problem using the "make quiz" button, so they have requested that I make sure that the quiz randomizes each time it is opened.
I need to randomize cell ranges A2:F51 across the rows. I don't want data to be randomized in any other way then across rows. Is this possible to do. I have found many apps that make this possible, however I don't know how to incorporate this function into my macro.
View 8 Replies View RelatedHow I can create randomize number sets?
Number range 1-80
in each set: 10 random numbers
How many number sets: 5 sets
I'm running a Secret Santa DJ competition this year and today now wish to make the draw.
Basically all entrants send in their mixes (in this case - upload to a webserver) and I then wish to try and use Excel to make the draw.
What I'd like to do is have a list of all the entrants in column a, use RAND() in column b to assign them each a number, and in column c use the list of entrants in column a to assign each person a mix to receive.
Through my browsing and searching on here, I came across the following (entered as an array); it's brilliant but unfortunately gives me duplications.
=INDEX($A$1:$A$10,COUNTA(A:A)-SUM((B1>$B$1:$B$10)+0))
I play in a rock band and i'm trying to create a randomly generated set list based on categories.
Rock, Blues, Slow, & Original are the categories
My sheet of songs is sorted perfectly by these categories already and I have dynamic ranges already named to their respective categories.
the module i am using to randomize these categories does not dynamically expand....
I have an Excel table with 7 columns. I have used a formula to randomize the data in each column, and it works fine, accept that it resorts/re-randomizes the contents of the table every time data is entered anywhere in the workbook. I would like the data to be sorted/randomized only once, and then only again upon pressing F9, since I have other spreadsheet which reference the data in the table.
This is the formula I use to sort/randomize the data, and I am using Excel 2010 on a PC.
=VLOOKUP(SMALL($C$2:$C$20,B2),($C$2:D20),2,FALSE)
Column B = numbered 1 - 20
Column C = =RAND()
Column D = last of names
Column E = sorted/randomized list of names.
Suppose in a work book I have a list for data in 5 rows.
1
2
3
4
5
Is there a way to randomize the data with one created button click (like hyperlink button used for linking) so that it may show any random output like 2,1,4,3,5 etc. Next time another click on randomize button creates another set of totaly random order of the 5 data sets.
I have a table like the one below, only it has a few hundreds of rows and columns and I need a solution in order to fill in the blank spaces with 0 and 1 in order to get the total by row and by column. Is there any way to do this with a formula/macro ?
1 May
2 May
3 May
4 May
a
2
b
[code]....
I'm having trouble with a small vba macro. At the end of the macro I test to see if two variables are equal and then print out true or false. However, for some reason even though the variables are equal vba is not treating them that way. I have put the values that represent the variables on a spreadsheet and used the if(x1=x2) formula and it says it is true, also, when I debug the macro and watch the values when it comes to test the logical expression the numbers are the same. I don't understand why vba does not say that the two variables are equal. I have attached a screenshot of the breakpoint where I double check the values are equal.
View 2 Replies View RelatedHow to correct my formula because it does not work?
Here the formula: =COUNTIFS(Data!C2:C24005,A17,Data!M2:M11149,"<=0")
I need to insert the formula in column C (Findings tab) which counts the rows in Column M (tab named "Data") that equal A17 (Column A in "Findings" tab) and which are less or equal zero. In addition if I drag the formula down I want to only the values be entered in highlighted in blue cells in column C (SKUs With Zero Sales in "Findings" tab) and empty cells in not highlighted cells. I attached images of these two tabs: Data and Findings.
I'm trying to count if there are situations where column a is equal to a specific number and column b is equal to another number.
both columns are numbers. Does anybody have a good idea how to do this, maybe countif, but i am not sure how to do more than one item with that.
I have a quite complex list of variables to put into a formula to come up with the correct number and I need some help to figure this one out. I don't know if it would be easier to set up a chart and then index the chart to do a lookup or how I need to go about doing this to achieve the most efficent solution.
I need the following to go into one formula:
1. =< 24 needs to show the number 24
2. =< 30 but > 24 needs to show 30
3. =< 32 but > 30 needs to show 32
4. =< 36 but > 32 needs to show 36
5. =< 40 but > 36 needs to show 40
6. =< 48 but > 40 needs to show 48
7. =< 50 but > 48 needs to show 50
8. =< 60 but > 50 needs to show 60
9. => 60 needs to show 60
I am trying to set up a spread sheet to figure square footage of plastic laminate countertops, but the plastic laminate only comes in several stock sizes : 3x8, 4x8, 5x8
3x10, 4x10, 5x10
3x12, 4x12, 5x12
So if I have a countertop that is 25 sq ft., I cant use a 3x8 (24 sq. ft), so I need to go up to the next size which would be a 4 x 8.
I might need to use a ROUNDUP function with this formula too? I already have cells set up to figure the depth, backsplash height, and front edge height and then give me the squage footage of that.
Example If Selection.Value *Does not equal* ActiveCell.Offset (0,1) Then .....
View 1 Replies View RelatedI am trying to set a scorecard up where it will give points depending on the % actual. For example:
if less than 60%, then 0,
if equal to or greater than 60% but less than 75%, then 1
if equal to greater than 75% but less than 80%, then 2 and so on.
I have been playing around with the example below, but can't seem to get it working.
[php]=IF(A1<60%,0,IF(A1>A1<75%,1,))[php]
Maybe it 's because I pickled my brains last night.
revised this code to reflect the "not equal to". I want the user to only enter "In" or "Out." Therefore, If cells b19:B26 does not have either word, then the message box will prompt the user to enter the correct word again. I think my code needs to be revised into some kind of loop.
View 9 Replies View RelatedI've created the following function that chooses the maximum value from a set of cells then inserts theappropriate row number (within a table) into a new cell.
=IF(J27=0,"?",IF(J27=J19,1,IF(J27=J20,2,IF(J27=J21,3,IF(J27=J22,4,IF(J27=J23,5,IF(J27=J24,6,IF(J27=J 25,7,IF(J27=J26,8)))))))))
It's working fine until I have 2 cells with the highest value. The above statement is entering the first cell that meets the criteria in the new cell but ignores the fact there maybe 2 (or more) of the same value.
How can I get both (or all) to be entered in the same cell? Is there a better way, maybe highlighting all the rows in the table that equal the max figure?
If/then statement:
Trying to say if C2 is equal to Fee, Fixed, then C2 should be equal to S2.
Was trying to use
=IF(c2=Fee, Fixed,c2=S2,C2)
but, don't think I have it quite.
I am confusing of using the equal function in vba, I need to have some cells between sheet1 and sheet to be equal but i cannot just put = sign in the sheet as it may be deleted. Can I have it as VBA code? how to do that and where to put this code, in what event?
View 3 Replies View RelatedI have 31 cells in a row (one for each day of the month. we collect data in these cells by typing "y" or "N". based on these input, cell 32 calculates the percentages based on total of Y's. Cell 33 has goal percentage. So, if the goal percentage is 30, Is there a way when a "y" or "n" is entered in cell 25, if the data percentage is = or 5% above the goal to get text message saying "good" but if the data percentage is 5% or more below goal, get a "not good" message?
View 3 Replies View RelatedI am having trouble creating a formula that will do what I need it to do. In C4 the I already have a formula that states if B4 is greater than 94.99% then it will equal 5. What I need it to do is if it is equal to or greater than 95% then =5. Also if it is equal to or less than 94.99% - 92% =3 and if less than 91.9% =1. Here is the worksheet I am using....
View 15 Replies View Related