I have a set number in col A for example 100. Col B is variable value. And Col C is where I need the formula.
If for example Col B is within 5% of Col A return value of "G" in Col C.
If Col B is within 20% of Col A return value of "A" in Col C.
If Col B is under or over 20% ( example if Col B is 79 or 121 ) of Col A return value of "R" in Col C.
I have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.
For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.
I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.
I need to be able to work out a percentage based on a value range. ie.
Cell D2 to D5 will define the percentages (so I can adjust it and play)
D2 = 18%
D3 = 15%
D4 = 13%
D5 = 10%
I need to work out:
If the value in cell A10 is between 11 and 200 calculate on D2, if between 201 - 500 calculate on D3, if between 501 - 2000 calculate on D4 ect ect
Cells A10 to A100 will have some figures put in them.I then want to calculate the %value used based on weather the figure in one of the A10 to A100 cells falls in a range. The data being put into the cells in column A will vary from report to report.
I'm trying to automate the calculations :
Cell A1: can contain any number between 1 and 4 (with two decimal places, i.e. 2.36 or 3.99)
Cell A2: based on what number is in A1, this field should return corresponding percentage (%), based on the following criteria:
1: is 100%
2.99: 1%
3 (including) and less (all the way to 4): 0%
Note: percentages between values 1 and 2.99 are equally spread
So let's say, when:
A1 is 1.00, then A2 should return 100%
A1 is 3.26, then A2 should return 0%
A1: is 1.25, then A2 should return 92% (or whatever percentage is correct based on above described criteria)
I'm attempting to do the following:
A1 contains names of projects.
B1 contains variances from budgets, being positive or negative numbers.
C1 will contain results.
I need to know which of the B1 cells contain a number equal to or greater than 20%/-20% and output the names in A1 that match the criteria to C3.
I am trying to create a bar chart that changes color based on a percentage range. Any advice on how to do this? I am using Excel 2007, Windows XP, Sharepoint 2010.
View 1 Replies View RelatedI have a form in work which acts as a tick sheet for tasks complete on a construction site. When a task is complete I copy & paste from a key of dates i.e. week ending 11.05.15, this allows me to see what week a task was complete.
Generally I only marked off tasks which were 100% complete but my manager wants me to enter the % of the task complete also, i.e. 80% in the box.
So my question is how can I have the formula assume that any box with a date & shading is 100% and any cell with a number i.e. 80 is only 80% complete. I need it to monitor around 150 cells and give me the overall % complete based on what i have discussed.
I am trying to get a row of cells to highlight a percentage based on a date range
Below is an example of what my spreadsheet will look like, very simple for managers to read and understand but I am stuck on how i can get this to display the right way.
In the example i would need the Jan column to colour for a certain percent for 21 days and continue to feb for 26 days. Im not sure if this makes sense but this is what they are asking for. Colour bars to simple show the percent of days off each month.
Name Start Date End Date Jan Feb Mar
Dale 11/01/14 26/02/14 21 days 26 days
I have attached the spreadsheet for an example : Book1.xlsx‎
I have a single column of numerical values that may repeat many times within
the column.
I require a flexible Formula:
Use an Input Cell for the specified and changeable Percentage(s) %.
Column may be filtered – so only take into account Visible Filtered Cells.
The Formula will calculate and Return the numerical range of values that fall
between the specified percentage % (using the Input Cell) e.g.; 70%.
The Formula should Return two numeric values: a Start Value and an End Value
– NOT necessarily the minimum and maximum per se BUT the MIN and MAX of the
values that appear 70% of the time in the column; therefore, taking into
account Repeat / Duplicate values.
The calculated Results: the two numeric values will be returned to separate
cells on a new Sheet.
I like to create "templates" for files that I work with on a reoccuring basis, just to make things simpler. The current template I am working on tracks items processed by day and is used for two reporting purposes; 1 totals the pay ending items processed so I have the dates laid out based on the 2 week period with formulas for that. The 2nd way it is reported is by the month. Since this is a template, only the first day of the first pay period for a calendar year needs to be entered and the rest of the dates populate based on that date. What I would now like to do is add columns for January - December monthly totals using a formula that will read something like "if column A (where the date is) contains 1/1/2014 - 1/31/2014, then sum up column L" and than copy that formula for the remaining months.
View 8 Replies View RelatedI want to count a range of percentage how many items fall under the % range below:-
from 0% to +- 10% (equal or +-10%)
from +-11% to +-20%
from +- 21% to +-30%
from more than +- 31%
I ahve compiled a spreadsheet that calculates how many wins an individual has as part of a team. I am entering '1' if they win and '0' if they lose but auto sum obviously doesn't add the 0's up to calculate how many matches have been played in total. I need the total matches played because I have a formula in place to calculate % of matches won.
Is there a formula I can use to add 0's and 1's or YES & No's up to total the amount played?? ( Adding up a vertical column. )Please help. I've spent days trying and I'm getting nowhere fast.
I need a conditioning format formula. If cell A2 is less than 50% of cell A1, then highlight red.
View 2 Replies View Relatedexample 1:
This years sales are $3700, a decrease of 11.6%. What would last years
sales be?
example 2:
This years sales are $4500, an increase of 151%. What would last years
sales be?
I am working on a spreadsheet which has lots of data in it. I have a Column i.e. Checked out and on each cell entered an X Mark indicating that a device has been checked out.
Since this Checked Out Column goes all the way down to > 1000 cells. Is there a way for us to make a formula and calculate percentage based on the number of X's that are entered and tell as that out of 1000 cells, the X's are 65% and so the blank cells would have to be checked to complete the list?
I have a column chart in excel. I would like to fill in part of each bar based on a percentage.
View 1 Replies View RelatedI have events in column 1,in my sheet there are about 800 events.
In col 2. each contestant has a label,blue(b),green(g) or red(r)
In column 3 I want to print the % of blue + green of the total for each event,
e.g first event in attached sheet would show 77.7% down to row 10 in col 3 etc.
I need a formula that looks at the percentage values of 3 cells and the in the next row ranks them 1st,2nd or 3rd. So for example cells A1, A2 and A3 have 30%, 20% and 10% respectively, so in cells B1, B2, and B3 I need to return 1st, 2nd, 3rd. But next week it could be that A1, A2, and A3's values are 20%, 30% and 10% respectively, and so I'd need cells B1, B2 and B3 to return 2, 1, 3, and so on. Be cool if the rows could automatically re-arrange so that whatever is ranked 1 is always on top, 2 in the middle and 3 at the bottom, but not that important. Be also cool if the 1st ranked row, chnaged colour or flashed or something, again not important though.
View 4 Replies View RelatedSpreedsheet on on sales and taxes
Need formula for cells.
3 different cells involved... B1 will have $ amounts, B10 tax code, B25 will have total of tax applied due to code.
Exp; cell B10 will contain the tax code... if you enter..... "1" in the cell the calculation will be 7% in cell B25, enter "2" in cell B10 and the calculation will be 6% in cell B25 , and if you enter "3" in cell B10 the calculation will be 13% in cell B25.
i've been viewing different formuals, and have to admit there is alot more to excel than I originally thought, and totally stumped as to what and how to go about my problem.
I have a problem, and it mainly stems from my employer not paying me correctly (and pretty much the other 1600 odd employees encounter the same issue too on a semi-regular basis).
To give you a run down, this is our complexed pay system
Mon-Fri, if you work up to 7h36m you get 100%, then 150% until 10h36 and then 200% after 10h36m working time
Sat, if you work, its 150% upto 7h36m and then 200% there after
Sun, double time all shift
But to throw in some complicated things, here are some more items that need to be considered.
If you work from one day into the next (say fri into sat, and sat into sun and sun into mon, then after midnight, it then goes to that days rates)
If you work your day off, say a weekday, your then paid the eqivelant of saturdays rates unless you were called in straight away which then is sundays rates
If you work your day off, say its a saturday or sunday, then its 200% for the whole shift.
And then public holidays, its 250% upto 7h36 and 300% thereafter
So as you can see, its pretty complicated, and my employer (a government employer) can't seem to get the right software to pay us correctly, nor can the poor employee sometimes work out if they've been paid correctly or not.
So, this is what I have so far:
columns: Day, Type (normal day or work day off or work day off immediate), On1, Sign Off1, Sign On2, Sign Off2, Sign On3, Sign Off3, Working Time, Paid hours
(for instance its my normal rostered monday, I start at 12pm, lunch at 5, return at 545 then finish at 915pm, which equates to 8h30m working time and 8h57m paid time) - the 3rd sign on and sign off is if we do extra work beyond our shift.
There are other things aswell like allowances, but thats for another day, and not as urgent as what i'm really looking for.
Now if anyone can understand what i've just written above, your doing pretty good (even some of the most experience employees still don't understan our pay system), and anyone able to produce a formula for what i'm looking for, i'd be exceptionally grateful, and probably the 1600 odd other employees too who seem to get shafted occassionally.
Is there a formula that I may use to keep track of the YTD percentage of attendance of volunteer workers over the course of a year? I have approx 200 workers meeting once a week. Their names are listed in column "A" from A-4 to A-204. Starting in column "E" is the date of the weekday for attendance.
For Example: E-1 is dated Jan. 7, 2008. F-1 is dated Jan. 14, 08 etc. I place a one (1) in the corresponding cell to show that they attended. The formula I need would start in cell D-4 and be dragged down to D-204.
There also must be a way to factor in the weeks which we are to meet that must be cancelled due to weather etc. The worker should not be penalized due to our cancellation.
I have a simple spread sheet where i need a formula to work out a percentage. eg total cases 35246 number of errors 3. what percentage is the 3 of the total cases and what is the formula required to reflect the answer.
View 3 Replies View Relatedhow to construct a formula that would give the amount of deposit needed initially that would equal, after an immediate percentage reduction, a certain amount.
For example, if the initial deposit was immediately decreased by 2.9 percent and 30 cents (as in a PayPal transaction), what would that initial deposit have to be to equal exactly 50 dollars after being reduced?
I'm trying to do a forecast of my organization's budget for the next five years and need to create scenarios where certain figures will either be increased or decreased by a specified percentage that varies from 5% to 20%. I have recorded eight macros that can accomplish this task, but I feel like there must be a more effienct method.
In addition, I would like to increase or decrease the figures from either column H or column J. Column R is the results column. This is the macro I recorded that provides for a 10% decrease:
I have a little table:
Columns A:B (separated by commas)
Row 1- Year One, 20
Row 2- Year One, 20
Row 3- Year One, 10
Row 4- Year One, 30
Row 5- Year One, 20
Row 6- Year One, 20
Row 7- Year Two, 10
Row 8- Year Two, 20
Row 9- Year Two, 20
Row 10- Year Two, 10
Row 11- Year Two, 20
Row 12- Year Two, 40
In the adjacent cells in columns C (C1:C12) I need a formula that would turn the value into a percentage of the total of the values for that year (e.g. in C1: 20 is 16.7% of 120, so the value displayed would be 16.7% (or 0.167)).
Pretend their are two Tabs in excel.
Tab 1:
"A1" contains a random number: "20"
Tab 2:
Column "A" has tonnes of random numbers:
6000 - Starting Balance (changeable)
5890
5800
5950
6080
6100
6180
6250
6300
an so on... (1,000 rows)
Based upon the number "20" that I placed in A1 on Tab 1, I want a formula that looks at the first 20 rows in column A within Tab 1, and then calculate the percentage change between the extreme "peak to trough" of the highest number to the lowest number within the 20 rows...
Below should make it really simple:
6000 - Starting Balance (freely changeable)
5890 -1.83%
5800 -3.33% - This was the lowest percentage change from the starting balance of 6,000
5950 -0.83%
6080 +1.33%
6100 +1.67%
6180 +3.00%
6250 +4.17%
6300 +5.00%
I have a number of columns, each containing several thousand points. For each column, I need to know the percentage of points that are within a certain percentage (1%, 3%, and 5%) of a target number.
View 4 Replies View RelatedI have two columns A and B. In each column are a list of numbers. I want to count the number of times the numbers in column A are greater than the numbers in column B and display it in the form of a percentage. An even easier way for me to do what I need is as follows...I have a third column (column C) that subtracts A from B...if it is a negative number, the cells in column C are autoformated to color the cell red. If it's a positive number, the cell is colored green. Is there a way I can count the number of cells that are red and divide them by the number of cells that are green to get a percentage?
View 2 Replies View RelatedI need to calculate the percentage based on self populating score. however I want excel/formula to ignore any cells which has "NA" in it so that it calculates the percentage based only on the cells having Numbers.
Now these Cells which contain Numbers might or might not contain numbers based on the "IF" function which decides wether the cell will have numbers or will remain "blank" or have "NA". To understand better please have a look at the enclosed sample (that would explain my need better)
Using conditional formatting i am trying to write a formula that changes colour on the percentage difference of another cell.
An example would be if cell A1 contained a target of 5% in cell A2 would be an actual. If cell A2 is equal to A1 or better then it would be green. If cell A2 was within 10% less of A1 (i.e 4.5%-4.99%) then amber and red for the target minus 10% (i.e <4.49%)
I want to do this as a conditional formatting formula as the target figure will change but 10% difference will remain the same.
