VBA Code For Using Cell Value To Reference Worksheet Name
Jul 15, 2014
I need a VBA code to reference the cell value to activate a particular worksheet name. In the sheet "Ini", Range ("B4"), there is a text of "Rawdata" This text is used to reference to the specific Sheet name and activate it.
However, I am unable to get my code to work. Thus, I changed it with a ' with green highlights for the following lines:
I've got 3 sheets, A, B, and C. In sheet C, I have a cell named "element". That cell can have either the letter A or the letter B in it. In my VB code, I want to reference the sheet which correlates with the "element" cell. So,
Worksheets("element").Select
when the user clicks my "go" button, it calls this logic, and I want the worksheet that correleates to the letter in the cell in worksheet C - to open.
The reason for my posting - this is not working, and may not even be possible. Perhaps someone has experience in this and knows how to do it - or knows a different way to do this.
how to use VBA to write a formula in one sheet that refers to a fixed cell on the sheet to the right. The referenced sheet may have different names and it may be in a different order (i.e. not Sheet(2)) but it will always be one sheet to the right. I just want to have cell A1=(cell B2 one sheet to the right).
I have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:
Code: =COUNTA(ABC!A:A) What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say
AAB ABC CDE
And have a formula in column B that converts this to
I have a macro which (see below) which will autofilter a spreadsheet to only show cases which are older than a 200 days. I'd like to add the ability for the end user to change the filter criteria as required (say from 200 to 300).
Ideally this would be done by having the macro reference cell G22 which is where I would allow the end user to change the filter criteria.
Faulty example of what I'm trying to do: =COUNTIFS('WORKSHEETNAME'!A7:A1000,">12/31/2010",''WORKSHEETNAME'!A7:A1000,"<1/1/2012",''WORKSHEETNAME'!F7:F1000,"Excluded")
I've tried INDIRECT, but I cant seem to make it work.
Where it is bolded I am trying to replace that with a cell reference such as A1 where I can input a website in that cell rather than edit the VBA code everytime
Here is the code:
Sub URL_Get_Query() With ActiveSheet.QueryTables.Add(Connection:= _ "URL;http://quote.money.cnn.com/quote/quote?symbols=msft", _
I have a formula to extract the worksheet name and add the "!" to it so it can be used in a copied formula... I'm just having trouble writing the formula to reference the text in the cell with the worksheet name. If it's easier, I also have the list of worksheets without the "!" - e.g., Sheet1, Sheet2, Sheet3, etc...
I want the formula to calculate, in my example, the sum of 2 cells on a different worksheet.
Been having some trouble with this using VBA. I can't seem to get the code to run properly.
Actually, if there is a way to get a right footer on one worksheet to be referenced in a cell on another, that would be even better but I haven't been able to find anything like that.
I've done this loads of times before but doing it this morning seems to not be working at all.
Previously I'd be in Sheet 1, I put the equals sign, I click into Sheet 2 in the cell I want, hit enter, and hey presto the external cell is referenced in Sheet 1.
However, what I'm trying to do here is not reference individual sheets within an excel document, but reference a totally separate Excel document. Can I do this or not?
If so how? Because when I select the second worksheet after I've entered the = sign, it just takes me to the second sheet - it doesn't seem to 'remember' that I'm in the middle of a formula.
I have recently learned a little about Excel. Enough to be able to do our payroll for my company on it. My question is: On the 1st page of my workbook, is my quarterly report which shows all taxes, social security, and medicare we hold out each payday for each employee. The rest of the worksheets are for each employee. How do I have each employees withholdings automatically go to my quarterly report page?
When ever I update my external CSV file and hit refresh all data, I get #REF! Errors. The CSV file has a table that changes daily. Thus the "A" Column has a different number of rows depending on the day. The problem is that Monday the CSV file will contain 700 Rows, while on Friday it will have 200 Rows. I end up with a lot of #REF! Errors friday. How do I write the code so that (A561 for example) does not change regardless if it can reference the target cell or not? I even thought of making a macro that just copied the formula into all of the cells after each refresh, but there must be a better way.
Example code =IF(A561>0,IF(Start!$H$2="Monday",'calculations-mon-sat'!O561,calculation!O561),"")
I'm trying to make a vba that would save the file with the end date that will reference to a certain cell that user selects it. Working Sheet is a name of a File, and Current Sheet is a name of the panel where user will select the date.
I have a UDF in Cell Sheet1!A1 that inputs some ranges from Sheet1 and calculates a number. Then I have a sub that calculates the value of this function with Evaluate(Sheet1!A1.formula). However, this only works when I am in Sheet1. Otherwise, I get the wrong calculation. How can I avoid this? I will post the code in the open source forum as it otherwise is quite good and automatically resizes array functions to their proper size.
I am trying to open a stored file on a network drive (with the file location stored in cell E4). When I try to run the macro, I get an error message on Line 3. (Sheets(E4.Value).Activate)
Does anyone know what I can do to fix this, or have a better method to open the closed files?
I've read that it's possible to reference information from a closed sheet, but I don't think that I'm experienced enough in VBA to take on that effort yet.
I've been tasked with redoing a revenue report at work, and in my head I've conjured up what could potentially be a huge time saving way of doing things in the future, although have searched help files and looked around online and can't find the formula/macro (if it exists) to enable me to do this.
The problem is this:
Sheet 1 of the workbook is a large input sheet. Every row contained in that sheet will, in column A, be titled 'red', 'yellow' or 'green'. Columns B onwards contain other data which (at the moment) is irrelevant to the problem.
Now what I want excel to do after I've put the raw data into the input sheet (sheet 1), is to read the text in column A for each row, then automatically copy ALL data in that row over to the next empty row on another worksheet.
ie Sheet 2 will have all rows that have 'Red' in column A on the input sheet, Sheet 3 will have all those titled 'Yellow' and Sheet 4 will have all those titled 'Red'.
I know I can use a filter on the input sheet to just show the data I want, but each colour coded row will contain different data to another, and if there is a formula/macro setup i can use to do the above, then I can set the subsequent worksheets up to hide the superflous columns from the input sheet.
I have the following codes in which I am to refer a file and folder to do some further processes.
myfilename = "C:Documents and settingsacsMy DocumentsEntrymyfile1.xls" folderPath = "C:Documents and settingsacsMy DocumentsEntry"
I want to enter these two paths in a sheet in my excel report file (For example, I am running the report from Report1.xls, in which there is a sheet name "Filepaths". In this,
in B5, I would like to enter the Filepath (B5 named as "FILEPATH") in B6, I would like to enter the Folderpath (B6 named as "FOLDERPATH")
So that, if I am copying the folder to another area, I no need to change the code every time in the VBA editor. I can do changes in these cells and it will be taken as the path to run the code further.
I am trying to use VB to vlookup between to workbooks 1. Make active workbook WBK1 2. Make workbook being open WBK2 3. Copy and Paste between WBK1 and WBK2 4. Have a vlookup in WBK1 and bring in the values from WBK2 5. Close WKB2 6. Copy, Paste, and transpose values in wkb1 within wkb1
The script works fine until it reaches the vlookup step. I have used the vlookup by itself without the copy and paste code successfully but when I combine the two it provides me with the error 9. Subscript out of range.
I am trying to find a way to automatically highlight all the cells specified by the cell references in a column on another worksheet (which will constantly have new values added).
On the attached sample, the 'Data Before' tab shows the base data before any highlighting. As cell references are added to the 'References' tab in 'column A' I want the respective cell to be highlighted on the 'Data Before' tab resulting in the 'Data After' tab and each time a new cell reference is added to the 'References' tab, the respective cell is then highlighted on the 'Data Before' tab.
I would like to have control over the highlight colour so that a different highlight colour can be specified for each date change, i.e. all cell references that are shown on the same date are the same colour but where the date changes a different highlight colour can be specified.
Trying to use INDIRECT to sum the contents of a column on another worksheet upto a certain cell reference which is in another cell on the worksheet.
=SUM(INDIRECT("Sheet1!A4:Sheet1!"&B1))
I have taken it back to simply having sheet1 with numbers in A4 to A23, then sheet2 with A23 in cell B1, and the formula above it C9, but I keep getting #REF!.
The formula works fine if on sheet1 without the worksheet names in it. Formula evaluation gets to =SUM(INDIRECT("Sheet1!A4:Sheet1!A23")) then gives =SUM(#REF!)
I am trying to create a budgeting spreadsheet that contains 26 worksheets that represent 2 week expense cycles. The worksheet will tally all the expenses in its 2 week cycle, compare them to a target budget, and calculate the remaining budget. I would like to roll the remaining budget over to the next 2 week budget cycle by having a cell refer to the remaining budget in the previous worksheet.
I am trying to accomplish this using the following VBA script. I get an error (Run-time error 1004: Application-defined or object-defined error) on the 3rd to last line of the code. I think the issue is with how I am constructing the wsReference variable. I have seen other codes do something similar (VBA - How to refer to a different worksheet cell) but I am not having any luck.
Sub Budget_Rollover() Dim i As Long ' Loop through all the worksheets, starting with the second sheet For i = 2 To Worksheets.Count Dim wsReference As String Dim wsName As String ' Define the name of the previous expense cycle worksheet
I have a macros ( code inserted ) as you can see in my code the macros save the workbook in any file name you chose just by changing the any filename option.
I would like this to be changed so that it saves based on a cell reference, say i has a name in lets say B10 i would like it to save as the name in B10.
Private Sub Workbook_BeforeClose(Cancel As Boolean) Application.DisplayAlerts = False Dim bk1 As Workbook Dim bk As Workbook Dim myfilename As String
This is a continuation of thread 182629 [URL] ....
The End User wanted originally to type characters into cell C1 of a worksheet that the macro searched for in another worksheet, copying across every row containing the input.
The responses gave me the following code which worked perfectly:
VB: With Sheets("PICKLIST") myFind = "*" & .[c1].Value & "*" End With If myFind = "*" & "" & "*" Then Exit Sub
Unfortunately, the user NOW wants a Text Box instead of putting the characters into a cell.
I added a textbox (originally called 'TextBox2' but renamed "Choice") and "Dimed" CHOICE As Range.
Then tried the following code:
VB: With Sheets("PICKLIST") myFind = "*" & CHOICE & "*" End With
But it generates a "RunTime Error 91" - Object variable or With block variable not set.
Sheet 1 contains huge amounts of data - thousands of rows and multiple columns
Sheet 2 - I want to extract the data from sheet 1 column A into sheet 2 column A but only the data from every 21st row.
I want to be able to copy the formula automatically down, otherwise it will take hours to do it manually. So far I can only get the cell reference to increment by 1 each time after copying.
I have the need to email the current worksheet in Excel 2007, which I have been able to do with the following ...
Sub SendTab() 'Declare and initialize your variables, and turn off screen updating. Dim wks As Worksheet Application.ScreenUpdating = False Set wks = ActiveSheet
[Code] .......
Is there a way I can also get it to also rename the sheet from the default "Book1" to the information in a referenced cell.
I need to reference the projected and actual expenses from the total on worksheet 'expenses' So i did so, however, if I change the drop down on the expenses worksheet to only display housing data, then the projected and actual expenses on my budget worksheet changes as well to the new data portrayed on the expenses worksheet.
I need to reference the cell, without it changing when I change the category display, but I need the cell to change accordingly if I enter new data in the overall tablet on the expenses worksheet.
Or do I need to create a seperate worksheet that has the data in and reference my cells on my budget worksheet to that new worksheet?
I have a workbook with daily sales information for each week in a period (4,5 or 6 weeks) depending on the fiscal year calendar. I have a dashboard to select the weekending date in cell D7. I used mscal 7.exe to embed the calendar. I need the date to remain the same, but want the calendar to show the current date. Cell H5 shows the current period;i.e. 1,2,3,4 etc. Cell H7 shows the week number of the period (1,2,3,4,5 and 6 for December).
I need vba code to showthe appropriate week's daily sales worksheet based on the info in cell H7 on the dashboard. The week number on the dashboard page is obtained fromthe calendar worksheet with a vlookup formula. These sheets are named "week 1, week 2, week 3, week 4, week 5 and week 6". I need to assign this code to a shape with the caption Create New Week.
