I would like a loop that would run through the information in column A and if its duplicated delete the entire row… Also it needs to be able to handle 10 records to 10,000, it changes daily
I have a huge worksheet with 26 columns and 1200 rows. This worksheet is updated by 4 people everyday. Column C, H, N & R are updated daily by these 4 people so these are dynamic columns so to speak. I would like to have a VBA that informs that particular individual when he enters a duplicate data, maybe a popup saying duplicate entry.
Is there a macro to delete an entire row if a duplicate entry appears only in a certain column.
1. Look for the column header with the name "File Number" 2. Anytime the same number under the "File Number" column appears more than once in that column, keep the row that contains first occurrence of that number buy delete the entire row anytime that number is repeated in another row in that same column.
This is regardless of what is contained in the other columns. For example..let's say these cells contained this data...
In this case, I would want to keep rows 1, 2, and 3. But, I would want to delete rows 4 & 5 because the number "UTE00225" has already appeared first in B1. I'm using Excel 2003.
I have a table that i use for a customer database. and the end user adds new customers to this table, what i would like is for a message box to pop up whenever cell B2 matches an entry in a column in the customers table. the table starts on row 25, and the column i would like to check for duplicates is column B. I would like the message box to give the user the message "A customer by this name already exists, Would you like to load this customers file?" If the answer is yes, then the row that the match was found on would be copied and pasted onto row 1. if the answer is no, then nothing else happens. I hope this makes sense, i am posting this sheet of my workbook for reference.
I have a form that information is entered in. At the end the user can then save the information in a spreadsheet by pressing a command button. The updating to the spreadsheet works, it is the part where the last entry is tested against the info on the form to prevent a duplicate entry that do not work.
I have tested that the program reads the info from the spreadsheet (see the commented lines).
I can attach the whole spreadsheet, but some of the entries on the form are linked to another spreadsheet that make it a bit cumbersome to attach two files.
VB: Private Sub cmdUpdate_Click() Dim lRow As Long Dim ws As Worksheet Set ws = Worksheets("TonnageInput")
I have a userform with a text box which asks for a Tag number which is then linked to a cell. Is it possible to show a warning dialogue box if a duplicate Tag number is entered?
how to set this up on a single cell also would like to see if code can be written for this?
I have a userform with 8 text boxes and users have to enter different numbers separated by commas like 1,5,6,15,28 and so on.
I want to put a validation that if a number is entered in any of the textboxes than the same shall not be allowed in any other textboxes. Even in the same text box, no duplicate number shall be allowed. ie if in a textbox 1,2,15 is entered , then in the same textbox also, user cannot enter 1 or 2 or 15 again.
i need to identify the first and last duplicat entrys and delete all rows in between. eg keep row 275 and 277 and delete row 276 all duplicates only in column C ..
I have a entry form in which i want to register customers. the first field is the customer number (which is unique(created by me) for every customer). This is TextBox 1 in the document. I would like to search for duplicates in worksheet 2, collumn A, when pressing "enter" to move from TextBox 1 to TextBox 2. A search for duplicates should start and a message should appear " duplicate found" if found, otherwise continue to TextBox 2 for further entry of information.
Please see my attached document for clarification.
I have multiple worksheets of computer equipment, each worksheet is a group/department. Column H is the serial number column and the entries have to be unique. I have managed to create the code below which does find duplicates across worksheets.
When error message pops up about which sheet the duplicate already exists on, the duplicate entry is deleted and the cell is blank but the error checks again and reports the blank existing on another worksheet and then it is stuck in a loop. How can I ignore the blank or null.
Private Sub Worksheet_Change(ByVal Target As Range) Dim I As Integer I = Sheets.Count If Not Intersect(Target, Range("H2:H200")) Is Nothing Then Do Until I = 0 If Application.IsError(Application.Match(Target, Sheets(I).Range("H2:H200"), 0)) Then Else MsgBox "That entry already exists in the " + Sheets(I).Name + " sheet" Target.ClearContents End If I = I - 1 Loop End If End Sub
I have a spreadsheet that uses a Form for Data entry. Each record has ID, Name, State, and about 20 more columns of information for each ID.
The data entry is working well.
What I need now is to add a check for a UNIQUE ID. If they are adding a new record I need my form to return a message if the ID they use is already in the database. So if they enter XXXXX and that is in the file already - they should get a message that XXXXX is already in the database and to please enter a new ID.
And once they fix XXXXX to XXXXY then the record is added.
I attached a file in which column A is dr_cr and E id INST_NO and column G is INST_AMT. This file like a bank statement. in which one instrument(cheque) present and i denote it c(credit) in column A. but if cheque credit then d(debit) means that this cheque present and dishonour. but some time one cheque credit and then debit and then credit. it means that we have to remove previous credit and debit entries. in this attached file you found this type of entries. i want to remove this type of entries. i further explain.
1. if one instrument have one credit and one debit its ok.
2. if one instrument two credit and one debit then remove one credit and one debit where instrument no and amount and drawee bank must be same.
3. if one instrument have two credit and two debit we have two remove one one debit and one credit.
4. if one instrument have three credit and two debit then we have to remove two credit and two debit so one credit left.
Is there any way of Removing the first duplicate in a list only? I am writing some vba to automate a month end process and wonder if there is a way to achieve this? (excels remove duplicates function keeps the first, and removes everything else). The data is in column C.
I have created a userform with 3 text boxes. It also has three buttons - clear, Cancel and Generate record button.
User form takes entries in the three text boxes and on clicking the Generate Record button, the values of the three Text Boxes are inserted in Column A, B and C of sheet1. The columns keep on populating with new data on each submit in the row below the last record.
Now it is required to enter data only if the value entered in TextBox1 is new and has not been entered previously in column A. If textbox entry is already aviailable in column A, a message box of 'Record available' shoud be prompted and the text entry must not be allowed until the data entered in TextBox1 is not unique.
I have a worksheet in which i am asking a user to enter manually a number in cell E3. Suppose the user starts with 100, then the next time he is entering in E3 he shoudnt be able to enter 100 nor any number less than 100. I dont have a range for the numbers that the user is going to enter.Therefore countif function does not work. Is there any way that i an store the number taht the user enters first in cell E3 and then use that database to avoid the user from entering the same or a number lesser than that number.????
making a macro that will scan for duplicates, length & empty cells.
I have the sample file below that does conditional formatting but it doesnt help as much because I want to show the reason for the highlight's on a comment instead.
sample file : [url]
file that might help out: [url]
checks would be: column A - duplicates and/or length should not be over 100 characters column B - duplicates column F - should only contain 2 comma's(or 3 keywords) all columns - check if no entries are found(empty cells)
I have 2 issues i am trying to work through, i have a spreadsheet with 3 data sheet tabs, the first issue i have is in Data sheet 1 I have a lot of duplicate addresses, I was wondering if there is a way to filter out the duplicate addresses so that only one of each address is showing.
Issue 2 that i have is a lot more complicated, In data sheet 1 i have a list of medical providers that reimburst at 110% or more, each address on that list needs to get 1 letter mailed to them, but i have to keep track of how many are going to each region, i.e. Columbus, OH region, Cincinnati, OH Region, Toledo, OH Region, and Cleveland, OH region. So what i want to do is create a 3rd data sheet that keeps track of total letters sent by region, but was wondering if it was possible for this info to be automatically transfered from data sheet 1 to data sheet 3. I don't need all the information in data sheet 1 to tranfer to data sheet 3. All i need is for data sheet 3 to read off the City field in data sheet 1, and calculate 1 letter sent to that region.
I dont even know if this is possible, but it is way beyond my realm of excel knowledge which isn't much.
Any help would be appreciated. I am trying to attach the spreadsheet, however it isn't allowing me to attach it, i keep getting a database error, when i upload it. It is under the max size limit too. Not sure what's going on.
I used to have a macro that did this for me, but the layout of the exported data has changed and now the whole macro has had to be rebuilt.
I've got a list of two pieces of data: Material (Column A) and Order (Column B). I'm putting a spreadsheet together and populating it with VLookUps. This spreadsheet will list the materials and the Orders after each, but then I also want to list the second Order in the next cell if there is a second order.
For instance, in the below, Material 10880873 has two different Orders. The first VLookUp grabs Order 513792568. I need the second VLookUp to grab the next Order 513792569.
I have two columns each of 5000 cells. Some cells of column A are duplicated in column B. The duplicates are not necessarily on the same rows. How do I delete the duplicates?
I've spent hours researching for an answer and I've tried Data>Filter>Advanced Filter many many times and it does not work. The two columns just sit there. Shouldn't this be a very easy thing to do in Excel?
Wihitn a large SS I have a column which has a number of entries that may include an amount of duplicate entries. Till now I have been using Sort and them manually deleting the duplicates is anyway that I can select just the Column and then without sorting go down and if a duplicate is found, then the duplicate would be deleted. Meant to say the dta is numeric.
james - smith - leeds- 01535 - 26/02/1983 - bd21 6ls steven - smith - bradford - 213789 - 28/01/1982 - bd33 5th james - smith - leeds - 01535 - 26/02/1983 - bd21 6ls steven - king - manchester - 213789 - 28/01/1982 andrew - wright - bingley - 36473 - 12/01/1981 - bd23 689
what im trying to do is to check all of the rows for duplicates in such a way that (if any row has the matching colums 1,2,5 and 6 then all but 1 of the rows will be deleted.
i have a few thousand entries and am just trying to get rid of all the duplicate rows. The problem is that the duplicate rows are not IDENTICAL for instance soime of them may have spelling mistakes hence i cannot just do a straight forward if row = row then delete.
I have a userform with several textboxes and 2 comboboxes. The data that I need protected from duplication is based in the comboboxes. If I ignore the other fields and presume the following it may be easier to understand:
The comboboxes are populated by the data stored in sheet1 and when the userform is complete, the OK button populates all the data into sheet2
Combobox1 contains names eg, John, Julie, Bob etc Combobox2 contains colours eg, Red, Blue, Green etc
I want the userform to allow the data to be entered into sheet2 only if it is not an exact duplicate of the choices in BOTH of the comboboxes
For Example John Red Julie Red Bob Blue John Blue
These are all ok, however, to try and enter John Red again would bring up a message box indicating a duplicate entry and prevent the data from being entered.
So for a project I need to put together a list of Portuguese-speaking last names. So I have various sources where I copied from, so I have one column in excel where I put all that data. I sorted the data to be in the correct alphabetical order. But when I try to remove the duplicate values in that column is says it removed them but it didn't and when it does it leaves many behind. I have tried the trim function, and even formatting but nothing works. I attached the non-formatted and non-trimmed list, because it doesn't seem to be making a difference.
I am trying to create a summary sheet that updates when input data is added.
I'm still learning many parts of excel and I'm unsure why the SUMIF function on occasion leaves duplicate data in.
I can live with the fact that I will need to correct the input data and am willing to just paste in corrected data when it has been validated via the data validation tab.
Once this has been done, all I am seeking is for a subsequent process to start which updates a summary sheet with the sums correctly adding via the sumif function.
I have left some instructions on the actual spreadsheet to clarify my intended results.
My spreadsheet has more than 200 columns and 5000 rows of data and blanks. When I select all columns and rows and remove the duplicates, 6 records are removed. I need to only keep and be able to identify those 6 records. I could use something like =IF(COUNTIF($A$2:A2,A2)=1,1,0) if I had only few columns that would identify dups but since there are so many columns it would be prodigious job to create one formula for each column and filter through 200.
I have a listbox which I want to Initialize by listing these values but not duplicating them (so in this case it would contain 1-14). Here is the mindblowingly complicated code I currently have:
[Code].....
This gives me the list as it appears on the sheet but doesn't get rid of the duplicates for me.