Would like to have a formula for removing duplicate row values from the attached sheet.
In simple, in the first row, Name1 and Name2 are repeating. And the requirement is to remove the repeated value "A" from Name2.
I have the regular headers in the first row, followed by rows containing my data. And at x number of rows, a new row containing headers appear again, followed by rows containing data. This goes on for the rest of report. What I need to do is remove the rest of the headers and lines because I only need to have one header in the first row.
Note that the header takes up two rows (one for the actual headers and one for the ====== lines. So removing the repeated headers is removing 2 rows.
For eg, part of the report looks like this:
PRODUCT PRODUCT NAME ==============================================12342EXAMPLE PRODUCT 122525EXAMPLE PRODUCT 2 35476EXAMPLE PRODUCT 3 53467EXAMPLE PRODUCT 4
PRODUCT PRODUCT NAME ==============================================135892EXAMPLE PRODUCT 5
How to remove words that are repeated and adjacent within a cell? I have about 20,000 cells to do this with so the spellcheck is not an option.
View 9 Replies View RelatedI have a collumn with lots of different text values some repeated. how can i count all these values so that it only counts each value once.
e.g
if in cell A1 i have = "apples"
and in cell A2 i have "apples"
and in cell A3 i have "Pear"
In colmn A:A i need returned, which numbers (if any) are repeated and how often each repeated number occured.
Admitedly... I'm lost on this one.
I have two sheets, where I am trying to look up the value from one sheet and post it to the other.
On sheet 1 I have the Names of the Individuals, On sheet 2 I have the Names of the individuals in a different order and then in the next column i have the amount of dollars they spent on a product.
The reason I don't think I can do a simple vlookup here is that sometimes the names are listed Multiple times each because they made seperate purchases.
So for example
Sheet 1 SHeet 2
John Doe Jane Doe $1,000
John Doe Michael Jordan $2,000
Jane Doe John Doe $3,000
Michael Jordan Michael Jackson $4,000
Michael Jackson John Doe $5,000
If I did a vlookup, I assume that John Doe would return $3,000 for both. I would like to return $3,000 for one and $5,000 for another.
I have a table like this. I tried using a formula to get the return code values equal no more have exito.
45
2
43
5
45
89
76
[code].....
How to do VLOOKUP bring the values of the numbers "1".?
I need to hide repeated values in balance column after the last transaction.
View 8 Replies View Relatedwriting values to range - first entry repeated
I'm having trouble with this set of commands
I am finding it very difficult to extract the Project reference data for each employee, I have attached sample working file for reference.
For Example
I have a project names in Rows and Employee names in Columns and each employee fill the working efforts in multiple projects and i would like to extract which all project they have worked for each month. Since the data is very huge i am not able to progress fast in collecting the data
Project NameEmp1Emp2Emp3
A
B 1015
C
D 2012010
Working.xlsx
I have created a simple VLookup to view the data from one sheet to another.
its works fines, but i get the following error message if there isn't a value on the second worksheet, #N/A
how can i remove these, without deleting the formula, so it just be a blank field " ".
I have a excel sheet and inside certin cell are vales of "0". I would like to delete those 0 but keep the other values I have around them. Is there any way to delete only the "0" without going cell by cell by cell?
View 3 Replies View RelatedI have a worksheet with columns A to E which hold the following data:- Week No, Budget Code, Budget Description, Name and Hours. However, as you can see in the attached spreadsheet there is not always a value in the hours field.
What I want to achieve is to automatically exclude any of the rows of data in the Pivot table that includes zero in the hours field (such as the rows highlighted in yellow) and also not to show if/when the pivot table is refreshed.
I have a data set that I add information to weekly. I then add a value at the end of the row, example active or inactive. I've found that, when using the remove duplicate function, it does not always remove the second instance, resulting in a loss of that added data(active or inactive). So I guess my question is, can I somehow specify which instance of duplicated data is removed?
View 6 Replies View Relatedwhat I need for excel to automatically remove the highest and lowest TOTAL POINTS and create an average "Speed Rating" of the remaining 3 scores.
Is it possible to get Excel to do this?
I am working on a form right now for a shipping company in MS Excel. Anyways, I have a few cells formatted as text that have a starting value of "[Insert Comments Here]". What I am trying to do is have it so that IF the cell has the original value "[Insert Comments Here]" upon printing, THEN the cell's value is changed to "" or some other way of not making it print.
I would like to be able to do this both with cells and the "Label" form objects.
I'm working on a big sheet in which I have values like the following:
Testtest 12345
Test 134691241
Testtestest 2385.234
Test test test 235
Testtest test 14.35172'36
T.E.S.T. test test 31246
What I need, is a formula removing anything after the first space (" ") from the right side, but I cannot seem to figure a way to solve the problem. I tried using SUBSTITUDE, REPLACE, FIND, LEFT, RIGHT, IF, COUNT, LEN formulas,
If I update my data, then refresh the pivot table, old values still show as an option. How can I delete these items? If it matters, my pivot table's name is PivotTable2.
View 1 Replies View RelatedSuppose I have some data in a column like below
Blue
Red
Green
green
red
RED
BLUE
I need a macro or excel formula so that it will remove duplicate products- case sensitive(removing all duplicate prod using using excel,that i know.) i.e. it should not consider Blue BLUE as duplicate. only consider Blue Blue as duplicate.
So the macro should work same as data -> remove duplicate function already exists in excel, except it will be case sensitive..
removing duplicate names. Students were allowed to take a quiz as many times as they wanted. I need to remove the duplicate entry by keeping the highest grade.
Here is the setup of my excel file. Column 1 has surnames, Column 2, has first name, and column 3 has grade.
I can't figure out how to filter them based on first and last name because some students have the same name. with the grade as the criteria
I would need an excel formula not macro
I need to remove values from column A that are present in column C without modifying the order in column B. To be more explicit below is an example:
Column A---------Column B-------Column C
5230400----------81,50----------1660000
3275500----------78,00----------6245700
2856300----------47,50----------5230400
1879800----------62,50----------2497900
2124300----------99,00----------1879800
2497900----------65,00
4826900----------77,50
2124200----------34,00
6245700----------61,50
3324400----------86,00
1660000----------53,00
Column A represents 600 materials.
Column B represents 600 prices. (different for each material)
Column C represents 107 materials that are present in column A and have to be removed along with their prices in column B.
Now i want to remove the materials that are in column A and C along with their prices, so i won't damage the order in the file.Meaning if i delete a row in A and shift the other materials up or down, and in the same time column B remains unchanged, the remaining materials will have different prices...and that's not good.
Is there a quick command that I can use to take
math
math
math
math
art
art
art
art
art
music
music
music
music
into
math
art
music
I am trying to solve a column total where rows that have a repeated column A value only have their column B value totaled once.
For example the table:
A B
item1 20
item1 20
item2 50
item3 30
The total I am looking for column B is 100 (20+50+30) and not 120, as item1 should only be added once.
I made a few forum searches I made and did not find my answer, though I suspect this is a repeat question. I am guessing there may be a sumif(frequency solution out there that I'm just not hip to yet.
I have some textboxes named value1 through to value10, and have got consistent, sequential coding in the change event of each box to perform some actions (enable some other textboxes.)
I was wondering if there was a way to tidy my coding so that I do not have 10 change events that are essentiallly the same except for their sequential numbering. This may be impossible, as I think I have to have a macro for each change event, but thought I ask just in case there is a way.
Private Sub value1_change()
If value1 "" Then
markup1.Enabled = True
Quote1.Enabled = True
Else
markup1.Value = ""
Quote1.Value = ""
markup1.Enabled = False
Quote1.Enabled = False
End If.......................
In the attached file column A has ID's. In the attached example i have used 2 ID's 141020061 & 151020062. I need to find the last entry of each ID and sum the value from the column F. that is the last entry for the ID 141020061 is 40500 and for 151020062 is 0 so the total should be 40500.
View 9 Replies View RelatedI have 1 to 30 spread sheet plus a Sheet with TOTAL , each represents one day ,
on each sheet I have one column and 6 lines where I will please random numbers from 1 - 50 but six number on each sheet
The question is on the total sheet I would like to have automatically the number repeats the most on those 31 sheets .
i have one Q??
i have these times
07:00
07:43
04:55
07:43
is it possible to COUNTIF the repeated hours? the result should be 3 "07:??"
how to delete repeated rows and just keep the first one found?
View 13 Replies View RelatedI have a table with some reapeated words in, I wondered if anyone had any methods of counting words and displaying the total in number format. for example if I had in cell A1-Hello and A2-Hello and A3-Bye how can I get Hello = 2 and Bye =1
View 9 Replies View RelatedI have a list of products more than 5000 positions (rows)
Some positions are repeated (It could be 1000 rows with "Pen" position)
Based on this I need to create new short list which will contain the list of ONLY UNIQUE positions.
The same function is: DATA - FILTER - ADVANCED FILTER - UNIQUE RECORD ONLY
It is only filter, but i need the same functionality for new short unique list