I have three columns
"A" is item number: "B" is sales Date: "C" is sales price.
What I would like to do is search column A and when there are two of the same item numbers know what date they sold and for what price. I would prefer to build another table that has only this data.
I have a spread sheet with bunch of rows and columns. Columns goes all the way from A ... BB and rows from 1 to 40,000
The main focus is column Y and AC
If there is a value of FALSE found in column Y then macro should go to previous row and copy the value that contains in column AC and then move down to the next row, , where the value FALSE was found and that's in column Y and paste that value in column AC the NUMERIC VALUE
Below is the data ...
I am using Excel 2008 for Mac. I have a spreadsheet that I am essentially using as a simple cheque ledger so that I can keep track of who I have written cheques to, for what amount, and what has already cleared. I have a the following columns:
Name
Date Written
Cheque Amount
Cleared?
In the 'Cleared?' column I mark an X when it has cleared the bank. I'm trying to find a way to get the SUM of the whole 'Cheque Amount' column that hasn't cleared (ie: has nothing in the 'cleared' column).
In the attached file column A has ID's. In the attached example i have used 2 ID's 141020061 & 151020062. I need to find the last entry of each ID and sum the value from the column F. that is the last entry for the ID 141020061 is 40500 and for 151020062 is 0 so the total should be 40500.
View 9 Replies View RelatedI have a sheet "Pattern" with a series of statements in column A, starting at row 12. These contain a lot of common words like 'a', 'and', 'that' etc which I would like to automatically remove. On a separate sheet 'Library' in column D I have a list of these common words which I would like to look through one by one and remove from the statements on the 'Pattern' sheet.
The code I have at the moment looks like,
Sub CommonWords()
For i = 3 To 65536
Dim w3 As String
w3 = Sheets("Library").Cells(i, 4).Value
Sheets("Pattern").Range("A12:A65536").Select
Selection.Replace What:=w3, Replacement:="", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
Next i
End Sub
But this only achieves to remove the contents of the 'Pattern' sheet, column A..?? Where am I going wrong? Also, with this method if I find and replace 'a' with the 'LookAt:=xlPart' option, is this going to remove all 'a' 's, even if they are in the middle of a word?
In colmn A:A i need returned, which numbers (if any) are repeated and how often each repeated number occured.
Admitedly... I'm lost on this one.
how do i copy one column to another one (with formula) that not repeat any number?
i have a list of prices and i need that list in other column with any price repeated.... and theses prices are imported data, so they change, thats way need to be formula =/
assuming we're comparing column a, i want to eliminate rows in which its column a value matches the column a value of a previous row.
what i have:
abcd
1351
2442
3235
4324
3542
2253
1344
what i want
abcd
1351
2442
3235
4324
i tried the advanced filter - copy unique record to another location but it would only copy the unique column a values to another location and not values on the same row attached to that column a value.
I need to hide repeated values in balance column after the last transaction.
View 8 Replies View RelatedI have data like this
namefoodripeness
bobbanannaA
boborangeA
bobstrawberyA
bobkiwi B
bobyogurtC
bobpear C
[Code]...
Not sure how to do it
I have simplified this spreadsheet from the original to get to the core of what I want it to do. There are three tabs: 1) tab:"query fields" is an area that places data that is retrieved from the web, in this case it retrieves tables from yahoo finance given a ticker input. The ticker input cell is currently on the "score card" tab. 2) tab:"score card" in this tab you can input a ticker symbol in the indicated box and it will populate the "query fields" with corresponding data. This tab also extracts certain fields from the retrieved tables and performs a pass/fail test then produces a score %
This is great if I'm doing one symbol at a time, however I eventually would like to 'loop' this process such that a score field is populated for a list of tickers, hence tab 3) "list". Ideally I'd create a control button to initiate the web retrieval process and it would go down my list, retrieve the table data, perform the pass/fail tests, then populate the corresponding score % in the cell next to the ticker symbols. I know I can keep running separate web queries for specific symbols, but I guess my secondary goal is to have this be as dynamic as possible, since the ticker list will change and the list could be sizable at times.
CSH- web query.xlsx
I have an Excel file in which I want to find the numbers which are repeated in several columns (B to L), but there are too many rows to find them looking one by one cell, is there a function which will allow me to find the common values which appear in these columns?
eg.:
A B C
1 3 4
2 1 7
2 4 7
4 1 1
results: 1 & 4
I have a excel doc with 8000 names I need to delete the people who are listed on 7 rows.
There are no blank rows and Colume A has the names sorted.
I am trying to do is when a user puts in an RMA number into a textbox (txtReviseRMA) on the userform, it will search column B on the spreadsheet to find the matching RMA number. Then I want it to look in column G for the Serial number and populate another textbox (txtSerial1) on the userform with that number.
My problem is that there can be a little as 1 serial number to an RMA or as many as 14, and each serial number has to go into a different textbox (they are named txtSerial1 all the way to txtSerial14).
If there are multiple serial numbers being sent in on one RMA, they are on different lines.
For example:
Column B (RMAs) Column G (Serials)
(B1) R66245 (G1) AA-10-1000
(B2) R66245 (G2) BB-20-2000
(B3) R66300 (G3) CC-30-3000
(B4) R66305 (G4) DD-40-4000
(B5) R66305 (G5) AA-10-1000
(B6) R66305 (G6) FF-60-6000
(B7) R66375 (G7) GG-70-7000..................
I need to look up the name in E2 in the list in column A and if it matches then lookup name in F2 in list column b, if it matches then the corresponding number in column C is displayed in column G. If neither names are in the 2 columns the words"Not on lists" is displayed in cell in column G.
The other problem is one name is spelled two different ways I want it to look for both spelling before moving on to looking up the second name.
I started with this formula but I'm getting #N/A or "not on list" when they are on the list. I'm using ranges prod_sum is columns AthruC, Last_name is range BthruC. =IF(AND(VLOOKUP(F4,prod_sum,3,0),VLOOKUP(I4,last_name,2,0)),"not on list")
I am comfortable with getting a macro to copy & paste where I need it to, however how to get the macro to recognise when a certain value has stopped.
For example in Column B on "DataDrop" are all the divisions that exist in my company i.e East Anglia, Essex, London etc. There is an empty row between each division.
I am trying to move a column of numbers based on the information in another column. I've been looking for about a week and find macros that are close but not quite.
In one column it reads Mobile, Home, or is blank. If the number is a Mobile (column R), the area code (column P) needs to move to column S and the phone (column Q) needs to move to column T and the primary phone (column R) needs to move to column U. Home and blank cells remain as they are.
area (P)
phone (Q)
primary phone (R)
col S
col T
col U
[code]....
I am trying to create a formula for a work report and I am afraid I am a bit of a novice with the more complex formulas. Here is what I am trying to do: Sheet 1 has Sales order numbers that duplicate based on the sales lines. Sheet 2 has single lines of sales order numbers and their assigned PO number. I would like to have Sheet 3 where it combines all data and duplicates and fills in the PO number to match all of the sales order numbers that repeat on the other sheet. I hope this makes sense. I can't seem to figure out if I need a VLookup or If or Match formula (or all of the above).
View 1 Replies View RelatedI am attempting to Organize some data; however, I have run into a problem. I will paste a sample of the data that I have and explain the situation....
View 9 Replies View RelatedI'm copying and pasting data from a PDF and need to eliminate some unnecessary data. The original .pdf has 4 columns: Account, Dollar Amount, Name, Notes
When I copy this to an excel document, it copies the row from all 4 columns into column A. The two columns I need are Account and Dollar Amount. All account numbers are 8 digits so I was able to create a formula to weed that out with this: =left(A1,8)
The problem I'm running into is obtaining the dollar amount within the cell. For example:
A1 contains: 11112222 $1234.56 Sample, Name Sample Note
I pull the 11112222 with =left(A1,8) in column B but not sure how to pull dollar amount to column C.
Further, the dollar amount varies from $1.01 to $10,000+
I need to sort information in a column containing both numbers and words. In the "asending" & "desending" it only gives two options to choose from. (none) & PartNum.
View 14 Replies View RelatedI would like to fill in a a form on page /sheet one and have the same info on every sheet that follows is it possible?
View 3 Replies View RelatedI have attached a spreadsheet and I am trying to capture the info in lines 2,7,12,17 and return the info into column d,e,f,g
The info in these columns at present has been manually entered but I am sure it could be automated.
OOL Roster Final 18-31Aug14.xlsx
The following code sets foundcell.address
View 2 Replies View RelatedI have data that I've converted from a different source, and the formatting doesn't always come out as I'd like it. For example, I have data that has two different values, and I need to split them into different columns. Is there an easy/quick way to do this?
15* 27016* 1324517* 2086518* 24943
I need a formula that will take the value of one cell and put it in another cell other than the one in which I am typing the formula. I can't think of how to do this.
I have two columns, A & B (no headers), of information. The columns are not identical, and column B has empty cells scattered throughout the column. For each empty cell in column B, I want to copy the same row of information into it from column A, as if I'm just scooting the information in column A that's on the same row as the empty cells in column B.
This is simple with a cut/paste, but when there's thirty empty cells, cutting and pasting takes time. (What's really frustrating is that I've figured out a few formulas that will copy the information from column A but all the information gets pasted in the column in which I'm creating the formula (say, column F, for example). THAT doesn't help me because the empty cells in column b are still empty!)
I have a sheet with about 1000 rows of data filling 40 columns. the data is the same in column 1 for a random number of rows between 2 and 40. ie as here...
2
2
2
2
33
33
33
4
4
4
4
4
4
etc.
Is it possible with a macro to divide the sheet into blocks of 50 rows each with just the data before it changes to a different no.
so that it looks like this
2
2
2
2
46empty rows here.......................
I have:
A1: Ph#
A2: Name
A3: Ph#
A4: Name
etc
I would like:
A1: Name B1: Ph#
A2: Name B2: Ph#
etc.
This is a large spreadsheet so I was hoping there was an easy way to make this change.
What I'm having a hard time is trying to get information from column C to pull into a cell, for a specific student (column A), but only when the entry happens between two set of dates (column B).
Column A = Student Name
Column B = Entry Date
Column C = Entry
So in a different worksheet, the names of the students will already be on the report and each column following will have a date range of a week. So for column B I want the entry that only happened between "09/07/09-"09/13/09". No student will have more than one entry a week so I just want it to locate the entry and fill in automatically. This will repeat for each week after as well.
I am trying to convert 14 to 15 digits lengthy Binary value to number.
The formula =BIN2DEC(A2) is giving error #NUM
101111100001010
101111100001010
101111100001010
101111000011100
101111000011100
101111000011100
110001000001010
