I want to set at my textbox,so that if user enter the number with comma instead of dot,the comma will automatically be changed into my default format(dot).for example,if user type in (86,5),the value will be converted to (86.5). I have read through the relevant previous thread regarding this matter and I wrote the function as below.It happens to be that (86,5) will change to (865.00),not as what it suppose to be.So can anyone correct my function below?
Private Sub txtdiameter_Change()
If txtdiameter = vbNullString Then Exit Sub
If Not IsNumeric(txtdiameter) Then
MsgBox "Numbers Only"
txtdiameter = "86" 'default value'
End If
My problem is that I am trying to use REPLACE function but I do not know where my starting point is.
I have last name first that you don't know how many characters will be, then empty space which is 7 characters long. How can I tell REPLACE formula where to start replacing empty spaces with comma?
I have the following code which is save Sheet as a text file. I know there are some options in Excel for saving, but it is not saving as ".txt" file.
I would like to modify this code to replace blank space with comma between Cells.
PHP Private Sub CommandButton1_Click()
Application.DisplayAlerts = False
' Save file name and path into a variable template_file = ActiveWorkbook.FullName
' Default directory would be c:temp. Users however will have the ability to change where to save the file if need be. ' Notice that i'm only allowing the save as option to be of .txt format. ' I'm also attaching the current date to the file name............
I have a string in a cell which is essentially comma separated and want it in the same cell but with enters instead of commas. Cell info to start with would look like this
Bob, The, Builder
And the result I am looking for is
Bob The Builder
All within the same cell so I can create a label which uses this information on a user form. I have attached a small example.
I am having problems applying custom format to numbers that need to be formatted. custom format use is 0",00". When I apply the custom format above to whole numbers, I achieve the results I want:
0.00 20.00 40.00
becomes
0,00 20,00 40,00
However, when I apply to numbers with decimal places
0.20.......
how I can change the custom format so that the period is replaced with a comma but the decimal values are preserved?
I have an UserForm, where I have several text boxes. One of these textboxes should be entered with decimals. I have been able to cope with the declarations, and set the variable as Variant. However, is it possible to prevent the user inserting "," instead of "."? Alternatively, automatically change "," to "."?
I want to select items in a listbox and transfer those items via command button in a textbox. The listbox is already filled. I have no idea how to realize that.
Attached is the form I created so far. I copied everything together and matched it up for me. It's probably not the best way but it works. I marked the section where I need help in yellow.
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
This problem has come up fairly frequently lately, and I'm not sure how to fix it, or if this is by design...but in Excel 2003 I can't seem to do a "Find and Replace" based on the value of a cell. I can do a find, based on cell value, but the moment I change to the replace tab, the "values" and "comments" are missing from the "look in" dropdown.
I've only noticed this when I'm trying to replace on a filtered list, so I'm not sure if that is part of the issue.
Perhaps an alternative way of arriving at the same goal. Basically I have a worksheet with a number of filtered columns. They are filtered just right, using custom filtering, and so I do not want to undo the filters. In some columns I have formulas that are returning #VALUE! errors. I'd like to replace all of these cells with NA.
I recently became owner of a spreadsheet with some issues, and I am trying to make it useful. Each row has a URL of a blog post, and I want to extract the date from it (which is present in each URL) while getting rid of the rest of the URL. I was able to get rid of everything up to the year (which comes first), but then the URL continues, for example, 2013/05/16/the-rest-of-the-url/ and I would like to just have 2013/05/16 remain.
I am trying to use find and replace with the find box reading 2013/??/??/*/ and replacing it with 2013/??/?? which effectively erases everything else in the url, but leaves ?? instead of the numbers. Is there any way to have it so that it keeps whatever was in the original box?
Trying to repeat a 550 or so character statement with a find/replace however I am getting type mismatch errors. When I use a smaller message in the "replace" it works.
I need it to post a message exactly as long as what I have in there. How do I get it to work?
Need assistance with the code for catching errors when using the find / replace function in excel? In particular, I am trying to write code to break to an error message when the value or string searched for isn't found in the find / replace. At the minute I have just copied the standard code using a macro and all this does is return a message box saying X entries replaced.
I have values in row A and I have values in row C. I want to create a loop to look up xxx and replace it with the values consecutively in row C. Look at example for a better Idea. I found a way to find and replace, but I not sure how to use it with qoutes. I was thinking maybe I dont even need row A and just supply a list and excel could have the chunk of data in the code itself.
I am trying to create a macro where it finds a a certain word in a column for example C. What i want it to do is find anything that says FWD_EUR and then replace that cell (e.g C2) with CASH_EUR_FWD and after it has done that it replaces the adjacent cell (e.g. D2) with EUR_FWD. I then want this to do the same with FWD_USD to CASH_USD_FWD and adjacent cell to USD_FWD.
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
I'm wanting to use Excel's built in replace function to replace ANY date with "Call:"
I'm not going to go into details about why, but I cannot use a code, as I only want to change them at specific times.
The dates are currently formatted as 12/09/2009. So I need to change the 12/09/2009 and any other date there may be to "call:" without having to go through every possible date.
Code: Private Sub cmdSearchButton_Click() Dim txtbox As String 'stores lookup value Dim x As Variant 'value for wwid txt box Dim ForeName As String Dim SurName As String Dim wwid As Variant Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
I have a form that has three fields (1. Comments (TEXT), 2. Legacy_Comments (TEXT), 3, Comment date (DATE))
Now my users need to keep adding comments to the comment text box, and when they do it automatically adds the date they entered the comment in the Comment date box. Now my problem is that since they keep adding comments to the comment box, I need to keep track of these comments in the Legacy_Comments (Text box).
For example, the First time a user enters a comment into the (1) comment text box it auto populates the date in the comment date box, and then adds the comment and date to the Legacy_Comment box. the end result is (comment,4/3/2014 now lets say a user needs to add a comment to the comments box tomorrow - I want the legacy_Comment box to then read (comment, 4/3/2014; comment2, 4/4/2014, ...., comment(n),date(n)) OR it can be vice-verse, because I just need to keep track of the comments, I am not worried if the new comments are before or after older (yesterdays / the day before yesterdays comments)
How can I write a VBA code that will always add the new comment to the legacy_comment field, without deleting the comments that were entered previously?
Code: If isnull(me.comment.value) Then Exit Sub ElseIf me.comment.value = true Then me.comment_date.value = date me.legacy_comment.value = me.comment.value & "," & me.comment_date.value & ";" me.legacy_comment.value = me.legacy_comment.value & "," & me.comment_date.value & ";"
It adds the comment only the first time, but it does not concatenate the string from yesterday to the string to today. I do not care which order the comments are, meaning if I added a comment today it can be before OR after the comment from yesterday.
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
I have a two-page multipage form. I have a textbox on page 1 (txtOccupantLoad), and I want to pass the value from that textbox to another textbox (txtOccLoad_L1) on page 2. The code I've tried so far looks like this:
Private Sub cmbChooseLevel_Change() If Me.cmbChooseLevel.Value = "Level 1" Then Me.txtOccLoad_L1.Value = Me.txtOccupantLoad.Value End If End Sub
What I'm trying to do is to use the same form for 10 different levels (floors) of a building. Then on page 2, I'll itemize the values for each floor. So the combobox determines which floor the calculations are for; txtOccupantLoad is the total of all incremental occupant loads on that floor; and txtOccLoad_L1 is the first of a series of textboxes on page 2 where the value for Level 1 should go. If the combo box shows "Level 2" then I'll write new code for the txtOccLoad_L2, and so on. I've also tried including "page1." and "page2." after "me."
I am trying to create a user form that has a series of text boxes that will all have a VLOOKUP function in them based off of input from a the first text box. If I can just get the code for the first one, I think I can figure out the rest. We will say that the file that the user form is contained in is 'Agent Administration' and the file that I want the VLOOKUP to pull from is called ' Roster for Auto Population'.
When the Go button in text box in the 'VSVA-1 Data' tab is pressed, a new tab is created. I would like the tab to be renamed after the text that is entered into the text box. Is this possible? Here is what I have so far.
VB: Sub RenameTab() 'Renames the worksheet tab ActiveWorkbook.Sheets("VSVA-1 Data").Select tabName = TextBox1 ActiveWorkbook.Sheets("VSVA Data").Select Selection.Name = tabName End Sub
