I have a column titled PA that has several cells with numbers, like 141, 151, 161, 242, 251, 382 etc. Is there a way that I can replace all these numbers in the column using a vba code. For example, replacing all the numbers beginning with 1** to 1 and 2** to 2.
View 3 RepliesI have 4 Columns. Column A has a master list of inventory numbers(about 3000 of them). Column B has dollar figures associated with them. Column C has some inventory numbers in it(800 of them), all of which are also in the master list in Column A. Column D has dollar figures that are associated with the inventory numbers in Column C.
My question is how can I make it so that if an inventory number in Column C equals one in Column A that the dollar figure associated with the inventory number in Column C gets put into its own column on the same row as the inventory number it was equal to in Column A.
I've tried basic IF functions and I can't get it to work because the inventory numbers aren't lined up on the same row. So one may be on row 300 but the other maybe located in row 12. Maybe if a double sort was possible or if someone knows how to make the row in the IF statement a variable.
I am doing some data coding using Excel and I am unable to figure out how to replace time ranges with numbers. For example, in my data I have
12:08
12:12
12:15
12:27
12:35
I want to code the data by changing any time within the range
12:00-12:10 into 1
12:20-12:40 into 2 and so on.
I have attached my excel sheet. I have continuous fraction numbers in every attribute value. How can i write vba code for replacing continuous fraction numbers in on row
Attribute name1 Attribute Value1
materials1 1/2 IN ID, 2/3 IN LG, 4/5 IN OD 1/4 IN THK
materials2 1/2 IN ID, 2/3 IN LG, 4/5 IN OD
materials3 1/2 IN ID, 2/3 IN LG
example: 1/2 IN ID, 2/3 IN LG, 4/5 IN OD 1/4 IN THK in a single row
I have TOOL OUT sheet
ModelNumberAttributeValue Replace Value
1materials2/4 IN LG, 3/4 IN ID, 5/9 IN OD,1/15 IN THK
2materials1/2 IN LG, 2/9 IN
3materials4/15 IN
4materials5/18 IN
5materials4/19 IN
6materials2/4 IN
7materials1/2 IN
8materials4/15 IN
9materials5/18 IN
10materials4/19 IN LG, 9/8 IN
11materials2/4 IN LG, 3/4 IN ID, 5/9 IN OD,1/15 IN THK
I want this to converted in (Replace value column)
Example 0.5 IN LG, 0.75 IN ID, 0.55 IN OD,0.06 IB
Tool_to_replace_Fraction_to_decimal_v1_MrShorty.xlsm‎
I have 2 colums like this. And I want whenever there is a reference like this âë. "some word" in column 2, to have the macro look up some word entry in column 1, find the text in the same row in column 2 and replace the âë. "some word" reference with the text found in column 2. (See attached, sheet 1 as it is, sheet 2 as I want it to be).
Sheet 1
another wordâë. "some word"
awordìåôÜöñáóç
bwordâë. "aword"
some wordêÜðïéá ëÝîç
Sheet 2
another wordêÜðïéá ëÝîç
awordìåôÜöñáóç
bwordìåôÜöñáóç
some wordêÜðïéá ëÝîç
I am facing a problem in evaluating a problem. I am referencing from the screenshot of excel file. I want to replace the values of Column-C for which column-A matches with column -G. And, the remaining will remain same.
Capture.jpg
I am also attaching the excel file.
I have unit measures that are converted across four columns (FT, SQFT, SQM and SQY).
THere are three units in rows (BOX, Skid and Roll). I am trying to identify in a column labeled "Duplicate Volume" with a formula stating "YES" if there are duplicate numbers (volumes) in any of the four conversion columns listed above. I tried to attach an excel file here but the system will not accept it. Hopefully the diagram i make below will be enough to understand the concept:
Unit Name FT SQFT SQM SQY Duplicate?
BOX 0 0 15 0
BOX 0 0 20 20 YES
Skid 0 10 10 10 YES
Skid 0 0 0 15
Roll 100 10 2 1.5
Roll 0 0 40 40 YES
I have over 50 thousand rows of this stuff...so looking at the data to decide if there are duplicates will not happen.
Any formula that i can put in the column titled "Duplicate" that can identify the duplicates with a "YES" in the cell where duplicates are found?
I want to sort the list like this:
1) If there is a zero (null) value in all 3 months, these records should be at the bottom sorted by record name (I did not show this field in my file).
2) If there is a non-zero (non-null) value in any of the 3 months, the records will be sorted with each other by total change.
Is there a way to do this without me doing sorts multiple times and manually moving rows of data around (which is what I have done to arrive at the list I have attached)? I am not experienced with VBA or Macros, and would prefer a detailed explanation if a solution is using either method.
I'm currently doing a project which requires me to find and replace a large number of values.
ie. Column A Row 1 = 80099, Column A Row 2 = 554441, Column A Row 3 = Z5478, CAR4 = B89877 etc...
I need to replace these numbers with meaningful values and I have a reference table to tell me what these codes mean ie. 80099 = apple juice, 554441 = orange puree, Z5478 = pumpkin soup, B89877 = banana smoothie. The reference table is in a separate excel spreadsheet and is tabulated in two columns ie. Column A = "the code", Column B = "the value".
There are like 1000+ codes I need to find and replace which I know is going to kill me if I did it manually. How do I find and replace all the values?
I wonder is there a way in excel to replace multiple words at once. To have like script where I had all words that need to be replaced and words replacing those. And just click the button and done? More specifically I'm translating some exports in xls and there are few words repeating over and over again in every document. So for example I need to replace word parfem for perfume like 500 times in one excel document atd. I think there has to be a easier way to replace those words at once.
View 5 Replies View RelatedI have a column of 3 letter codes (Righthand side) all differant ie BHP, CBA, NAB, WBC etc. (2000 of them) On the left I have the formula ie =MisData!VOLUME!BHP.ASX
Each formula should have the relevant code within it such as the BHP in the formula on the 2nd row should be CBA, the third formula should have NAB in it. right down the whole 2000 codes without doing it one by one. Now using the find & replace tool to do it one ny one
=MisData!VOLUME!BHP.ASX BHP
=MisData!VOLUME!BHP.ASX CBA
=MisData!VOLUME!BHP.ASX NAB
=MisData!VOLUME!BHP.ASX WBC
I'm using Excel 2010 and my spreadsheet contains numbers in columns A:E and approx 500+ rows. Here is a 10 row example of my data:
A B C D E
0 1 2 3 4
5 6 7 8 9
0 2 4 6 8
1 3 5 7 9
1 2 4 5 8
3 4 5 6 9
9 8 1 2 3
7 6 1 4 0
0 8 2 1 9
1 0 5 3 2
I would like to count the number of consecutive times each number appears (to a max of 9 consecutive times in a row). So, from my example above:
Number 1 appears:
1 consecutive time = 1 (appears in row 1)
2 consecutive times = 1 (appears in rows 4 & 5)
3 consecutive times = 0
4 consecutive times = 1 (appears in rows 7, 8, 9 & 10)
Number 2 appears:
1 consecutive time = 4 (appears in row 1, row 3, row 5 & row 7)
2 consecutive times = 1 (appears in rows 9 & 10)
3 consecutive times = 0
4 consecutive times = 0
Number 5 appears:
1 consecutive time = 2 (appears in row 2 & row 10)
2 consecutive times = 0
3 consecutive times = 1 (appears in rows 4, 5 & 6)
4 consecutive times = 0
and so on....
I have data in sheet 1 like below
Custid loc city
123 us newyork
124 uk wales
876 in mumbai
Sheet 2
custid newcustomerid
123 756
124 394
Outputsheet:
Custid loc city
756 us newyork
394 uk wales
876 in mumbai
So it will check sheet1 custid with sheet2 custid. If both matches it will replace custid with newcustid.if cust id not exists it will load sheet1 recprds as usual.
I work for a charity and I have to cancel the donations of people whose credit card donations have been declined in three consecutive months.
If in Column A I have a list of donor IDs whose credit cards were declined in Jan 2008, in Column B I have a list of donor IDs whose credit cards were declined in Feb 2008 and in Column C I have a list of donor IDs whose credit cards were declined in Mar 2008, is there a way of showing in a fourth column which donor IDs were common (repeated) in Columns A, B and C? I would have a title for each column in A1, B1 and C1, and also the column where the repeated donor IDs would be displayed.
I need to compare two colums by number decription for example m344 in one column and fsh344-1 in another. All I want to match is 344. In column a I want to indcate the match by placing an X by each match. View my attachment for reference. I don't know if it makes a difference but the columns are centered in my original spreadsheet.
View 8 Replies View RelatedI have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
following issue:
The following table is given:
flower
20
rose
flower
21
rose
[Code] ........
Which needs to be turned into:
flower
20
22
rose
flower
31
32
blossom
tree
1
3
apple
The last column is the one that dictates when a new range of numbers start. There should be one range of numbers for Rose, One range for Blossom etc.
I have a list of part numbers which repeat when there are multple prices they were sold at. For each unique part number I need one median price. The list if of about 500 parts but with the various different prices the file is 3700 rows. How can i do this quickly? For each unique part number I need one median price.
View 3 Replies View RelatedI would like to take the data from worksheet1 and put into worksheet2 but limit the length of a list (the real spread sheet has over 100 rows and i would like them in 4 sets of 25 versus the example I provided). Is there an array or macro that would make this work (keeping the formatting)..
Excel 2007
B
C
3
Name
Company
[Code].....
I have a need to combine multiple columns into a long list of results in 2 final columns. Here is my example...
Current layout with varying number of data points per row...
ColumnA | ColumnB | ColumnC | ColumnD | etc...
example1 | Test1 | Test2 | Test3 | Test4
example2 | Option1 | Option2
example3 | Number1 | Number2 | Number3 | Number4 | Number5
Desired Result
ColumnA | ColumnB
example1 | Test1
example1 | Test2
example1 | Test3
example1 | Test4
example2 | Option1
example2 | Option2
example3 | Number1
example3 | Number2
and so on and on and on until all rows have been filled in down the file...
Is this possible?
I have a spreadsheet with 10 columns which are for tags for products. Some columns are filled in for 10 products and some are not. For instance, product 1 has 7 tags while product 2 has only 2 tags and so on. Now what I am looking to do is combine all the tags for each product with a "," inbetween each one. The problem is if I just use a simple =A2&","&B2&","&C2 etc formula is that if there are only 2 tags then I get 8 ","s. I also tried it with an IF statement but by the time I was done nesting items I became cross eyed and said there has to be an easier way to do this.
I have create a spreadsheet with the data and the result that I typed into the "result" column.
Example:................
The key point is that I have over 400 columns grouped in three, offset by one row down for each (this is due to a different formula I have working). Each column is 60 numbers long (not including empty cells above data). I want to copy all of these columns into a single set of three columns on another sheet (Sheet2). (These will be the fifth, sixth, and seventh columns, E, F, and G. If it would be simpler, I could simply copy the third of each set of columns on Sheet1 (C, F, I) to column G of Sheet2. Then there would be a total of 144 columns being copied (60 numbers per column).) All of this copying has to be values-only as the original columns consist of formulas referencing outside cells. Sheet2 should look like this:.............
I found this code on Ozgrid to sort all columns of a worksheet that were continuous with no gaps or spaces that works well:
Sub CopyToA()
Do While ActiveCell <> ""
Range(ActiveCell, ActiveCell.End(xlDown)).Cut Destination:=Range("a65535").End(xlUp).Offset(1, 0)
ActiveCell.Offset(0, 1).Select
Loop
End Sub
However, I've tried to manipulate the code myself to 1) find all columns that aren't empty then 2) sort each column individually (WITHOUT expanding the sort to other columns) and 3) combining all the numbers into one seperate column. There are many posts concerning sorting but not one that addressed this particular situation.
I am trying to write a macro that will take data from column A and use it as a column header in column C, and then take the corresponding data in column B and list it under the column header in column C. When the value in column A changes it will move on to column D and then list the corresponding data from column B underneath it in column D until all of the data in the 2 columns is spread across the worksheet. Example:..............
View 2 Replies View RelatedI have a column that looks like the following and I need to add the numbers:
27 skids
31 skids
56 skids
13 skids
The unit "skids" is constant. The answer I am looking for is "127" or "127 skids"
I have a large database of research data where the first column contains different categories (labelled as I, II, III, IV, V, and VI). For each row there is a data value in the second column that is numeric. What I need to do is move the data so that the data are displayed in 6 columns with the data values listed each column heading according to the category label. In the example I've shown there are 6 different categories, but the number of categories (and hence the number of columns in the final resulting sheet) will change for different data sets that I'm using. Also note the the number of cases for each different category is different (so that each column will not be even in terms of the number of rows of data under each column heading). I hope I've been able to explain what I'm looking for clearly.
I've attached a sample file showing the sample data input that I have on one sheet, and then the desired re-tablulated outcome on the second. I have done this using the auto-filter function and copy/paste, but this will take far too long for the larger datasets I'm working with.
I have a spreadsheet with thousands of columns. Due to poor planning on my part I need to insert a column between each existing column (e.g. I need to insert a column between the existing columns A and B, B and C, etc...). I would rather not have to do this manually thousands of times.
View 3 Replies View RelatedI have columns A through AKP (A:AKP) with data, and there is a varied number of rows for each column. If possible, I need a macro that will "stack" columns in pairs of two. For example, column "C" directly under column "A" and column "D" directly under column "B" and so on for all columns A:AKP.
This is an example of what my data looks like:
COLUMN A COLUMN B COLUMN C COLUMN D
ROW 1 2598 F800 2599 F800
ROW 2 2598 K1300 2599 K1300
[Code].....
Certification and Training tracking.xlsx
I want to create a certification only list on a separate tab of training that has been completed where a certification has been issued (as indicated by a "Y" in the "Certification?" column on the training tracking tab) and then populate from some of the fields vs. all of the fields.
What I have now, only pulls the first occurence, not all occurences. I saw that I could have identified the multiple columns that needed to be populated, but it didn't work either, so I'm fine putting a separate vlookup in each column.
Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.
In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.
CURRENT SHEET
ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4
89PENS ABC STATIONERY CO LLC [code]....
The attached example file may be a better alternative to view this problem.