Been looking all day in the answered threads for an answer and no luck, so I turn to again: I need to find an address of a cell matching a condition e.g. I have a results output in varying length but having fixed block structure. I want to find the block staring address as in a Match("test", "A:A", 0).Value command but apparently its an illegal command. I’ve been thinking of a Vlookup(test,”A:A”,0,false) structure but got no idea how to make it return the address instead of a value.
Retrieving the address of the last cell before the FIRST blank in a range.
OK, I have searched the web through six different search engines and explored too many dead end solutions to this problem that I am nearly ready to just scrap the whole sheet.
The problem is very simple.
I need to return the address of the last cell that contains data before the FIRST blank cell.
Heck, I don’t even need to have the address, I can just index the position.
Problem is this question has been posted on nearly every excel help forum from here to pokipsy. Unfortunately EVERY solution I have seen fails the “FIRST blank” requirement.
I have a column of data that never has blanks until the end of the data. I need to know what that cell address is in order to identify a range.
This data has a table above it and below it so none of the “dynamic range” or “Dynamic range name” solutions will work.
How do you get that address without the function continuing to the last blank cell?
I have a formula that checks a cell containing an email address, and if the format is not the office standard, displays a message. We now allow 2 variations, and I want to check for the second condition as well.
Basically, the email address is in the format
"Firstname"."Lastname@here.com
and the formula just checks the address against a lookup of names, the only seperator being period.
I now also need to be able to check for an underscore, and I don't know how to combine the conditions.
The existing forumula is
=IF((LEFT(A2,FIND(".",A2)-1))(LEFT(E3,FIND(" ",E3)-1)),"Check Email Recipient Main Database page column BQ:BR","")
and of course the underscore is easy, too
=IF((LEFT(A3,FIND("_",A3)-1))(LEFT(E3,FIND(" ",E3)-1)),"Check Email Recipient Main Database page column BQ:BR","")
but when I try to combine them, I get an error, or at best a VALUE output.
I think I need to nest them, but maybe there is a way to combine the conditions in or use "OR" and still get the "check email" message" ??
I have 2 sheets in an excel folder and in fact I would like to create a macro to tranfer a row of the chart present in Sheet 1 if a cell is matching a condition so that the macro identifies each row of the chart in the Sheet 1 and transfer the row in the other sheet if the value in the column A (Chart Sheet 1) is equal to 1 :
sheets("Global Sheet").Select Range("A1").Select If activecell = 1 Then Transfer A1:J1 in the other excel sheet ( anywhere)
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
I'm using Excel 2010 and I have a copy of an address in Excel. I'm trying to identify all the people who live by themselves- without partners and spouses.
I have a column array like this: A B C D E F G H I J K L M N O P Q R S T PDENOStatusTitleFirst NamesInitialsSurnameSuffixDate of AttainmentFranchise FlagAddress 1Address 2Address 3Address 4Address 5Address 6Address 7Address 8Address 9Postcode
And the relevant columns is usually L. I am trying to figure out the formula that allow me to extract or at least highlight the people who live by themselves- or alternatively the people who live in the same house (which would therefore identify by exclusion the singletons).
I am trying to have an order form auto populate information, however I have run into a small problem when doing so. I am unable to use VBA because it is locked by whoever originally created the spreadsheet so I need a formula solution if possible. I would like for the worksheet "Order Form" to auto populate the type of printer cartridge when there is a 0 in the column "On Hand" on the "List" worksheet. I know a loop could do the trick but I was wondering if maybe a vlookup or if statements could get the job done. Here is a completed sample of what I would like to happen.
Row#2 Gets information from another database depending upon country and product code. In example Country is India and Proudct is brake. From source it will fetch info.
Starting Row#6, all the products are listed down. My requirement is what ever the data gets reflected in Row#2, should get copied and pasted to corresponding product code starting Row#6. In this example I have highlighted Brakes product data.
So when product in B2 is TEE, the corresponding Row#7 should get values only from Row#2..
i have a button that creates a new sheet and names it "GroupX" X being the next number, it automatically adds on the right number by itself and it works fine... i want it my array to be dynamic so that i dont have to manually edit the array and the macro every time i add a new sheet.
On my main worksheet, I have a list of stocks in the "A column", so for example reading down the list would be:
Vodafone Vodafone Ericsson Nokia etc...
I have a seperate worksheet for each different name (about 100), and I wanted to know if there was a way to select all the information relating to the name "vodafone" for example, and to copy and paste that into the worksheet called vodafone. The problem is copying and pasting 100 times would take ages and wanted to know whether there is an easier way using VBA.
I'm having a difficult time returning COUNTIF values for a positive match between 2 columns THAT meet a certain condition. Basically I want to iterate through column A sheet 1 (ONLY for values where column B is paid) and return a count for every instance there is a match of value A sheet 1 in column A sheet 2. In other words, I'm looking to find the number of ids marked as paid from Column A sheet 1 that exist in Column A sheet 2. I don't wish to return the actual ids, just the total count.
I've tried the following but I know there's an error in iterating through Column A the way I have it:
Assume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
I have created a spreadsheet which creates an average of feedback for trainers in a training company. The form adds up the feedback score into column L of the summary sheet and I have created a summary sheet which I want you use to calculate the average for each trainer.
I have cobbled together an array formula which creates the overallaverage for each trainer based on the named ranges entered via the form.
I am trying to get the data out of a cell and put it in a textbox in my userform. What I have is a Worksheet that has autofilter on. After the user clicks certain objectbuttons, there is only one row, that has data in it, displayed. The cell I'm after will always be in column A and be the second visible row.
I have the following in Column A. 01. Artist - Title
I manage to put 01 in Column B and Title in Column D I am struggling to split between the "." and the "-" to show Artist in Column C I am using in Column B
I am currently struggling with a spreadsheet that has been created in Excel 2007. Essentially, it has a number of items (individually identified by "S code" in the first column) that need to be tested at the specific dates over a one year period (i.e. at "2 weeks", "4 weeks", "8 weeks", etc) as shown in the screenshot below.
A user manually enters "Complete" into the corresponding cell in the "In-testing status" section of the spreadsheet when testing has been completed for a certain item at a particular time point.
Screenshot.jpg
I already have set up conditional formatting that highlights cells with dates older than the current date red. What I need to do now is to check for a particular item and date whether or not the corresponding "In-testing Status" cell reads "COMPLETE". If it does, I need to use a conditional formatting rule to return formatting to normal.
What I am unsure of is how exactly to retrieve the value of the corresponding "In-testing Status" cell.
Unfortunately I can't use a macro-enabled workbook in this environment
I have a cell (A1) that contains text. That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26). When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1). The reference cells are manually formatted.
I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.
programming 2 macros in a bank reconciliation sheet I am trying to create.
Basically the data consists of two sets: the ledger side and bank side. Both sides consists of multiple columns that include date, description and amount.
The following two situations can occur and which need to be covered with a macro.
Many to one matching When we make payments to say 100 different suppliers at once, the ledger side will show 100 lines with the different amounts. However on the bank side it will only show one line with a total amount for the transaction. As the description on the ledger side is the same for all transactions done at the same time, it should be possible to have a macro add these lines and compare the total with entries on the bank side. Once a matching amount has been found, the macro should place an ‘x’ next to all entries on the ledger and bank side, in order to show that these transactions have been reconciled.
Partial cell matching In this case we are only dealing with one line on both the ledger and bank side. The issue is that the description does not always perfectly match with one another. The ledger side might say ‘Brown Corp.’ and the bank side might say ‘Brown Corporation’. I want to come up with a macro that can recognize this partial match and still reconcile the lines by placing a ‘x’ to both the ledger and bank entry. The match however should be done with a combination of description, date and amount as several different bookings might be done for the same supplier in the same month.
I am trying to find dates & time within text in a cell & return to a separate cell. The issue I have is that the date format varies frequently. I also can't rely on searching for "Sent:" as this also varies frequently
e.g. From: ######## Sent: 17 November 2011 11:57
I would like to return 17/11/2011 11:57
From: ####### Sent: 01/11/2011 11:50:13
I would like to return 01/11/2011 11:50
From: ######## Date: 05/11/2011 09:45:13
How can i search for various forms of dates and return them into a cell?
I am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.
The Cell formula that I am trying to use is as follows:
i need to find a way to search for numbers in a cell that are attached at the end of a group of letters. ex. (xxxxxxxxx01-01-001). i want to search backwards in the cell going right to left. what i need to do is once i find the numbers i need to go to the last number ex. (......x01-.....) and in front of it place a space ex. (......x 01-.......). right now i havent come up with a formula that can do this.
So I have 2 sheets from a much larger worksheet where I wish for the first sheet to extract a row of values, one at a time from the second sheet using a range of numbers I enter as reference for where to look for the data. Sheet 1 can be thought of as a summary page and Sheet 2 is where data is stored.
I need to first check if any data under Sheet 2 column B fall within a specified range of numbers and if any of those numbers are found I want it to grab the largest and latest number from that range and pull all the data from certain columns in that same row and place it into Sheet 1, one column value at a time.
Sheet 1 A1 = A range of numbers as text. 10-15, 16-20 etc Only one range is entered. This also tells me what results I'm looking at. Sheet 1 B4:B14 = Destination cells for the individual data I'm wanting to pull from Sheet 2 columns H:P. B4 wants H, B5 wants I, B6 wants J etc
Sheet 2 column A = A3:A102 are numbered 1:100. Sheet 2 column B = A series of numbers anywhere from 10-70. Always in sequence and they can repeat. 10,10,11,12,13,14,15,15,15,16 etc. Ranges from B3:B102. Only one number per cell. Sheet 2 columns H:P = Data in H3:P102 I want to extract to Sheet 1 B4:B14.
Now lets say I want a formula for Sheet 1 B4 which wants a value in Sheet 2 H. If Sheet 1 A1 = 10-15, I want to check whether Sheet 2 column B has any values equaling those and then tell me which row that last number appeared in. Example: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5. (B6 is outside range and B4 isn't the last time the 14 appears.)
Then, knowing B5 is the value I want, find which row it is in (row 5 in this example) or use the number in A5 (3) and then find my way to column H (H5) where the value I want to pull is.
Example 2: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5. Sheet 2 H4=10, Sheet 2 H5=32, Sheet 2 H6=42. Place "32" from H5 into Sheet 1 B4.
I'd like to also have some error control so I'm not trying to pull data from blank cells if it's relevant. Maybe check if Sheet 2 X3=0 and if it is, do nothing as no data appears if the cell is 0.
I have put a lot of time into trying to solve this myself but I feel way out of my depth. I've tried going step by step but I can't seem to figure out which functions are relevant and also things like how to return the range that the A1 values appear in or if using MAX, not having it return values outside of A1's range also.
I am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
On a worksheet called "Contact Info" column A starting in row 2 I have a list of names (variable length). In Columns B2-D I need the email address, work phone number, and cell phone number.
I searched and I keep finding something that's not quite what I'm looking to do so I think I'm missing something really simple.
Let's say that I want each cell in col b to be the sum of 5 plus whatever value is in the cell adjacent to it on the left (col).
I know that you can just write a formula in each cell like...
b1 will be =sum(a1+5) b2 will be =sum(a2+5)
... but is there a shortcut so that you don't have to write out the actual cell address for each one?
Meaning - is there a predefined name or something that represents the cell to the left or right so you can just use that instead, allowing you to just copy paste the same formula all the way down the column? Something like...
b1 will be =sum(left+5) b2 will be =sum(left+5)
... where "left" represents whatever value is in the cell to the left of that particular cell?
I have a formula (AL15) to determine the address of the last column with a value greater than 1. =COUNTIF(C16:AC16,">=1")+2. I then use this column value to aquire the Absolute row "15" and the determined column=(ADDRESS(15,AL15,4)). This returns to me a Column value and row value that I need to use as a refference. How can I convert this returned value to a reference.
If a cell changes to true i want it to send an email to the address that is in another cell,
For example if F5 CHANGES to true then send email to address in G5,
From here i can add in the subject line, and body i just cant figure out how to get it to send to a specific email address based on the cell value, and also only do it once, when it changes to TRUE rather than everytime the sheet is active, so i would require a macro to constantly be running, or run of off the cell when it changes
I've a sheet that presents the profitability of sales locations in a geographic layout (similar to Tables in a restaurant), each sales location is a cell, with roughly 1,600 locations presented. Each location is colour coded based on performance / measure, in a basic thermographic way [e.g. dark blue for very poor, solid red for high performance] with users being able to change metrics and re-colour cells accordingly.
The sheet is already information rich, but I'm wanting to detect the cell address directly under the pointer and populate a text box or other cell based on the value in the cell directly below the mouse pointer.
My question is; Is there a simple way of detecting the mouse position on the XL Grid? nb. Want to avoid having to activate cell beneath pointer.
