The hyperlink can be activated from a number of difference sheets. Once the user reaches the instruciton sheet they need to be able to scroll around to read it fully but they will not need to enter any data or activate any cells. How can I get it so once they have read the instrucditons they can return to the sheet they started from?
View 6 RepliesI want to make a "return" button that follows the user from the start sheet to other sheets and acts as a "return to the start sheet" button. I tried just recording a macro and cut/pasting the button from one sheet to the next, but apparently when you do this the button name changes.
View 6 Replies View RelatedI am trying to create a data entry sheet to enter quotes on. When a quote is received, I click on my "Add quote" button and a userform appears. Data is entered into the userform (frmEntryForm) and returned back to the next available row.
I also need to be able to:
Edit a row by double-clicking it. When a row is double-clicked, data from that row is passed back to the userform, edited and returned back to the same row (to prevent duplicates).Validate that all fields are complete within the userform where relevant (i.e. if the work is not complete or in progress then the "Invoice Number" and "Actual Cost" fields are disabled and blanked to prevent entry (I think this is almost sorted judging by my tests)
I have attached my sheet : 2014 Gatwick Quote Log (Macro Enabled).xlsm
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
Create a macro button in 'Spreadsheet 2' that searches 'Spreadsheet 1' for updated information specific to a certain criteria and adds it to a new row in 'Spreadsheet 2.'
There are three sheets
Prospects (where all original data is entered)
Actions -Bob (Bob's new Prospects are added to this sheet)
Actions -Frank (Frank's new Prospects are added to this sheet)
So in this example Row 6 in Prospects (Constituents, Rating, Manager and Solicitor would be added to ACTION - Bob's sheet on Row 5
and
Row 8 in Prospects (Constituents, its Rating, Manager and Solicitor would be added to ACTIONS - Frank sheet on Row 5
Here is the example spreadsheet - Prospects and Actions.xlsx
If I have a cell that has as its contents as sheet name, is there anyway I can use the cell's address to reference that sheet?
As an example, say I have in Sheet1, cell A1, the text Sheet2. And let's say I want to return the value of cell B2 on whichever sheet the text of A1 says. So, on Sheet1, I might have this:
i have two sheets, one to display results (Reults tab) & the other tab containing the data (Data tab)
what i am trying to do is some how create a search function and have a forumula which contains a LIKE function that looks up the data table
RANGE = Data!A2:K255
the search needs to lookup the primary column Data!B2:B255 ... if any results are found .. show them on the results tab.. and if multiple results are found, display those as well.. (in either instance, the whole row of information in respect to the results need to be dislayed and hopefully no duplicates are found .. eg, Data!A:K of a hit)
is there a formula that can achieve this? oh, the search is TEXT based and there should be no empty cells within the dataset
after some MASSIVE googling, i have stumbled accross this
B1 = Search box (txt field)
A6 (which will be a hidden column) contains =MATCH($B$1,Data!A2:A255,0). this formula provides the first instance of the result and provides the row number
A7 contains =MATCH($B$1,OFFSET(Data!$A$1,A6+1,0,8-(A6+1),1),0)+A6.
this is supposed to look for the next row number which contains a match and provide that row number
and througout my other columns, i have
B6=OFFSET(Data!$A$1,A6,1)
B7=OFFSET(Data!$A$1,A6,2)
B8=OFFSET(Data!$A$1,A6,3)
and so on
2 things i cannot recitify..
1, the match has to be EXACT ... unfortunately i cannot use exact .. needs to be LIKE .. eg, i cant use the search word "boat" as the range of data has "boats"
2, it comes up with multile .. irrelevent results.
I have 2 sheets in a work book both contain the customers address if I leave a line not type on on sheet 1 then it will put a 0 on sheet 2 is there a formula to stop this happening.
View 3 Replies View RelatedI've got a User Form that works perfectly. It's activated on Chart Month sheet, you enter data into it and it switches to Comments sheet and copies the data, before returning back to the Chart Month sheet.
I have now added the same functionality to Chart Week sheet. Both Chart sheets use the same comments data, so it doesn't matter if you run the User Form from Chart Month or Chart Week. However, when I run the User Form from Chart Week then it switches to the Chart Month sheet once it copies the data, as I have Chart Month in the code. How do I get it to return to the sheet that it was originally on ie either Chart Week or Chart Month?
Code:
Private Sub CommandButton1_Click()
Dim emptyRow As Long
'Make Sheet30 Active
Sheets("Comments").Activate
'Determine emptyRow
emptyRow = WorksheetFunction.CountA(Range("D:D")) + 1
[Code] .........
I have to match table column name with the column name in the sheets and get the values from column 6 in sheet2 if "# of values" in sheet1 matches with "Counter" of sheets for the same column.
if ("Table Column Name sheet1"="Column Name sheet2" then
if("Counter sheet2"="# of Values sheet1" then
return "Total # of rows Sheet2" from same row.
I am using Excel 2003.
Sheet 1 ....
I have a workbook that uses the following for a list of names (in a specific cell) over multiple sheets:
Burns, Charles; Simpson, Bart; Smithers, Waylon; Wiggum, Ralph
Some names appear on different sheets. I would like to create a TOC sheet that lists what sheet each name shows up on. I can pull the names and have a list of all of them, but how to
a.) determine all of the sheets where each name shows up and, subsequently,
b.) how to programmatically create a hyperlink to whatever sheet(s) each name shows up on.
I've attached a dummy workbook. The column in question is Content Owners. There would be a link to each separate sheet in different cells adjacent to the name.
CRSample.xls
I need a formula to add two (2) cells (one cell in sheet 1 and the second cell in sheet 2) and return a value of the two (2) cells in sheet 3. I would like the formula to return a zero (0) value instead of #VALUE! ERROR displayed in sheet 3 if a cell in sheet 1 has zero (0) value and the second cell in sheet 2 is blank. For example: sheet 1 D2 (0) + sheet 2 D2 (blank cell) = zero (0) instead of #VALUE! ERROR
In addition, if cells B11:B12 are blank in both sheet 1 and 2, I would like the formula to display blank in sheet 3 for cell C11:C15 instead of displaying #VALUE! ERROR.
Here is the formula I have: =IF(OR(ISBLANK(Sheet1!D2),ISBLANK(Sheet2!D2)),"",Sheet1!D2+Sheet2!D2)
Note: I have attached a sample data set for better conceptualization of the problem. Sample_Formula.xls
I have a spreadsheet with 21 columns. What would be the easiest way to search column I for the word 'pending' and when that word is found to return the entire row to another sheet.
Along with that I also need to return only columns b,c,e,f,g,i,j,k. I also don't want to return rows that have certain number data in column C, that number data can range from 2-4 digits long.
I have a spreadsheet that is nearly 100 worksheets. I am new to VBA and would like to put a button on each tab to return me to the last active sheet. I've tried other codes I've found on here but with no luck. I'm not sure if i'm posting them to the right area within VBA.
View 4 Replies View Relatedwhat is the function to return the SHEET name to a cell?
View 3 Replies View RelatedI am working on a project for work and my first tab is titled "Directions". I have over 500 users coming in and edit multiple tabs at the same time. Is there a macro/or option that would after a user saves changes, would return to the first tab "directions" so that my other users wont be in the middle of what the last person edited?
Is there a way to get the data in the last row of a sheet and show it in another workbook? And also maybe the 2nd last row?
I want to develop on the formula I have below to return the value in the same sheet as the formula from Cell AA2 if the result of the formula below returns #N/A
=IF(ISERROR(VLOOKUP(B2,Analyst!$J:$K,2,FALSE)), VLOOKUP(AP2,Analyst!$B:$C,2,0),VLOOKUP('IE STORES AGING 06-05-2014'!B2,Analyst!J:K,2,FALSE))
I have a sheet named formula the column highlighted in orange will be used in searching to the other sheet which is the table, I try to used the formula VLOOKUP but it didnt work.
View 5 Replies View RelatedI have a worksheet that contains a 5 week shift pattern for workers. It is briefly laid out as:
JanFebAB
111330-21300700-1400
221230-20300700-1400
Months Jan to Dec 09 are there and shifts are divided up to ABCDE. I need another sheet to return the value of the shift time i.e. 1330-2130, probably via a lookup?? In my second sheet I have the Day number, the month and the shift letter.
I have one column of about 10 names (each of which is unique). The cell adjacent to these names is empty and I want to insert a value into this cell.
The value I'd like to insert into this cell is located in another sheet attached to the same file. This sheet has the same layout, except the unique name has the value next to it and the order of the names is different.
I'd like the formula to determine where the name from the first sheet matches the name from the second sheet. I'd like it to then display the data associated with that unique name in the first sheet, adjacent to the name in the blank cell.
If I ask in a macro to open sheet containing a fax header, copy it, then how do I tell Vb to return to the original sheet to paste. There many sheets that require this from a button click on the sheet and instead of storing the graphic in all sheets I just want 1 copy so file closes faster. I would normally just name the original sheet, but this will change with every sheet.
View 13 Replies View RelatedI'm working with an excel worksheet that uses a TFS plug-in to retrieve tree-structured data from a TFS database. Each item has a "Title" depending on it's position in the tree, in some cell between "Title 1" and "Title 9" inclusive.
Currently I display the title in a new column on the same sheet as the TFS data using the formla below. Since custom columns do not automatically get applied to new items in the TFS list after refreshing, I have to click in a cell and apply to all rows everytime I refresh.
On a different sheet I have a pivot table which contains the work item "ID". What I'd like to do is just be able to retrieve the title for each work item in a column on the sheet with the pivot table, using index/match to find the row, and then return the title from the first non-blank title cell.
Current formula on the TFS sheet (note that '@' indicates "this row", and I've replaced the long table name with "TFSData")
Code:
=IFERROR(
INDEX(TFSData[@[Title 1]:[Title 9]],
MATCH(TRUE,
INDEX(TFSData[@[Title 1]:[Title 9]]"",
1,
0),
0)),
"")
I need to know how to select the sheet the user was on at the time they ran the macro. The macro has to select (because I'm not yet smart enough to avoid all the selecting...) cells on other sheets, but I want to return to the sheet they started from at the end of the macro.
Unfortunately, they create these sheets themselves, and I have no idea what they will be named, or where they will be, or what their code numbers will be. They could delete them at any time and rearrange.
Sorry if this is a really dumb question. I suspect it is, but I can't find out how to fix it, and most people are smart enough to avoid the selects so I suspect it isn't an issue for them.
Most of the methods used for returning the sheet name are quite cumbersome. "=MID(CELL("filename",A1), FIND("]",CELL("filename",A1))+1,256)" takes up a lot of space in a larger formula.
Is it possible, please, to create a Name which returns the sheet name? For example I could write "=ThisSheet" and it would return the name of the sheet.
Of course I could resort to a UDF, but I wondered if it could be done directly in Excel.
When I try to insert the formula "=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)" into a Name, Excel helpfully converts A1 to "'Sheet1'!A1". So "=ThisSheet" in Sheet2 returns "Sheet1".
If I make the sheet name part of the Name, as in "'Sheet1'!ThisSheet, it works OK, but has to be added for each new sheet (though it works if an old sheet is copied).
I am trying to copy onto sheet1 Colum FH date from sheet2 Colum E by matching Colum I on sheet1 with Colum B on sheet2. I would like to know if its possible.
View 3 Replies View RelatedI have a large data set which is basically just transactions on accounts by date and I want to return the transactions in date order by account number. I've attached an example where sheet 2 is the transaction listing and sheet 1 is what I'd like to return.
View 3 Replies View RelatedI am currently looking at a simple data set spanning a few years of annual average data. I want to create a front sheet to show people in what year the maximum value was reached for each site but am having trouble returning the values......
The summary sheet is headed:......
I want the formula to say - find the summary sheet max value cell in the main data sheet row 2 (for XYZ) and return the corresponding column from row 1 (year). I've got myself in a muddle trying to create array data from the index function and want something simple. There are only about 30 rows so am happy to manually select the rows in question and repeat the formula entry so it doesn't need to be fancy.
I have a workbook with a menu and 122 sheets holding detail for unique item (product model).
On the menu there is an index of the sheet names which was hand typed. However, the sheet names change as models evolve/get replaced.
I've written a small macro to put the sheet name in cell J1 of each sheet.
[Code] ......
On my menu page i was hoping to do something like this:
A B
Index NAME
2 =sheet[A2].$J$1
3 =sheet[A3].$J$1
That way i could just drag this down and my index list would complete itself and would dynamically update as sheet names change....
I am looking for a VBA code which can be used to interpolate between values at a given interval and return these values to an excel sheet. I have a list with X and Y values and need to interpolate (linear) between two X points to return intermediate values for Y (interval between values is defined by the user in a userform). The code is to continue with interpolation between two consecutive X points until it has reached the end of the listing. In the example only several points are given, but the list can be longer or shorter than given in the example. The results need to be returned to a new sheet.
View 4 Replies View Related