I want to make a "return" button that follows the user from the start sheet to other sheets and acts as a "return to the start sheet" button. I tried just recording a macro and cut/pasting the button from one sheet to the next, but apparently when you do this the button name changes.
View 6 RepliesI have a created a form (1st one) and by reading bits from here I have managed to get it to do everything I need bar one thing. Is it possible to have the cursor return to the start of the form (Textbox) after clicking the OK button? The ok button write every thing to the sheet and the i have to tab past my other commann buttons.
View 2 Replies View RelatedI want to assign a macro of start time and end time on one button. I tried but its not working..
View 2 Replies View RelatedHOW TO SET FLOATING COMMAND BUTTONS in sheet which fixed at top or bottom of the screen not fixed at cells
means while scrolling a screen it should look like fix at bottom of the screen
I want to have a small button at the top of the sheet that when pressed, will automatically reset all filtered autofilters back to show all.
View 9 Replies View RelatedI am running excel 2010 with windows 7. I created a macro in sheet 1 and I wish to activate the macro from sheet 2 using a form button. I have entered the code below. I know how to perform this function on a more simple macro like adding names to cells. This code is a bit more complex I just dont know where to start.
Code:
Sub LoanData()
'
' LoanData Macro
[Code].....
If I have a button on Sheet2, what is the correct VBA code to put on the ThisWorkbook code sheet so that it gets run?
View 7 Replies View RelatedI have this code :
[Code] .....
Great Timer. Have this assigned to a button to start, how can I work in a button to stop or pause this code from running?
I currently have a button on a worksheet that loads a userform. I have code written that's not in a in a separate module but in the user form itself. It uses the information entered on the user form screen. When I try to reference data that's on a sheet other than the one that the button is located on, I get a "select method of range class failed" error. I assume that this problem has to do with the button macro being located on a different sheet than the data. Is there an easy fix?
View 4 Replies View Relatedhow I can write code to create a button on a worksheets and then link to another subprocedure.
I tried recording a macro and this is what excel so eloquently gave me:
ActiveSheet.Buttons.Add(384.75, 60.75, 79.5, 39.75).Select
Selection.OnAction = "CreateImport"
ActiveSheet.Shapes("Button 1").Select
Selection.Characters.Text = "Parse Deposits for Import"
With Selection.Characters(Start:=1, Length:=25).Font
. Name = "Arial"
.FontStyle = "Regular"
.Size = 10
.Strikethrough = False
.Superscript = False
.Subscript = False
.OutlineFont = False
.Shadow = False
.Underline = xlUnderlineStyleNone
.ColorIndex = xlAutomatic
.TintAndShade = 0
.ThemeFont = xlThemeFontNone
End With
This works fine, my only problem is if the button that is created is actually named Button2 or 3, etc. Is there a way to assign the new button to a variable, or would it be an object? this way it wouldn't matter what it was named.
I would like to know the easiest way to temporarily keep a worksheet code from running while I am editing, then turn it back on when I am done. I was thinking a button with these commands(?)>
Application.ScreenUpdating = False
Application.EnableEvents = True
but I don't know which button to use, or if I would need a button for each.
A button macro that will move the whole row of the selected cell to another sheet?
View 3 Replies View RelatedCASH BK
CASHIERS
DATE
CASH
TOTAL
DIFF
SALES
GBP
AR
GBP
AR
GBP
[code]....
above is the sheet template we use on a monthly basis. I would to like to use a command button which will run a macro creating a new sheet with the sheet name each month. The idea is to have a text box and a command button,enter the month in the text box and click the button. A sheet for the month to create at end.
let's say I run a macro from a button on sheet 3, macro process on sheet 10. Is there a way that the macro would automatically go back to sheet 3? Like a "Back" button on IE. I can't code Sheets("sheet 3").Select because I want it to do the same thing on sheet 4,5,6...
View 3 Replies View RelatedI am trying to return start and finish date of events depending on when resources are allocated.
View 4 Replies View RelatedThe hyperlink can be activated from a number of difference sheets. Once the user reaches the instruciton sheet they need to be able to scroll around to read it fully but they will not need to enter any data or activate any cells. How can I get it so once they have read the instrucditons they can return to the sheet they started from?
View 6 Replies View Relatedif A1 is a start date and B1 is the end date, I want C1 to return the number of months there are between the start and end dates?
View 9 Replies View RelatedAnyone know why the NETWORKDAYS() function will return a value of 1 if the start and end date are the same? Does the function always assume that the start_date is at 12:00AM and the end_date is at 11:59PM, because it seems to also show that there are 3 days between 11/04/08 and 11/06/08.
View 9 Replies View RelatedI need help in simulating the functionality of the OFFSET function with some of standard Excel functions which are shown at this webpage (I will be using this converter to generate the webpage from the sheet):
Spreadsheet Converter Supported Functions
I ask this because I need to create an interactive online calculator which absolutely needs to have the ability to allow the user to select the RANGE of the data to be analyzed. I included an example sheet with the offset function in the pink cell…Do you think any other standard excel function can be used to simulate its functionality?
I have been trying to search for either a function or VBA that will perform the following:
If I enter I want all months >=1/1/07 and <=3/31/07 it would tell me that the months in between are January, February and March and so on with all dates.
I am trying to return the first occurrence of a variable text string with-in brackets for all data on the spreadsheet using the "RIGHT" excel function, the text to search is in column D.
Example for cells D2 & D3 reads:
D2:Adv Costs (27a) - would return "27a"
D3:Designer Unit (60) (Base) (50abc) - would return "50abc"
Is it possible to change the behaviour of the return button within a textbox? What I would like is, once the return button is pressed, it starts a new line in the textbox rather than it moving to the next textbox within the form.
View 3 Replies View Relatedi want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
View 1 Replies View RelatedI want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
Context: I have a spreadsheet that contains a list of employee names and their certifications. I want to be able to assign a button to each employee in column B with a macro that is able to zip files from a folder that contains that employees name.
The following code assigns buttons to each employee in column B. At the moment the code I have is able to assign the macro "Zip" to each button.
[Code] .....
Now, this Zip macro is able to zip the file for the employee "Anthony Tran". However I need it to be able to recognise which employee's button I've clicked and search the same files as above except with that employees name instead of "Anthony Tran".
If it makes things easier, the code for creating buttons for each employee is able to name that button as the employees name that it represents.
This is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
ActiveSheet.Select
Range("B4:B37").Select
Selection.ClearContents
Range("G4:G37").Select
Selection.ClearContents
Range("B1").Select
Selection.ClearContents
Range("D1").Select
Selection.ClearContents
Range("F1").Select
Selection.ClearContents
Range("J1").Select
Selection.ClearContents
Range("M2:M3").Select
Selection.ClearContents
Range("B4").Select
ActiveWorkbook.Save
Application.Quit
I am trying to create a time sheet where there will be a start time - end time - number of hours (difference between the 2) - pay rate - total pay, but am getting strange results!
View 9 Replies View RelatedContext: I have a spreadsheet that contains a list of employee names and their certifications. I want to be able to assign a button to each employee in column B with a macro that is able to zip files from a folder that contains that employees name.
The following code assigns buttons to each employee in column B. At the moment the code I have is able to assign the macro "Zip" to each button.
VB:
[COLOR=#333333]Dim Btn As Button[/COLOR]
[COLOR=#333333]Dim rng As Range[/COLOR]
[COLOR=#333333]For I = 2 To RowCount + 1[/COLOR]
[COLOR=#333333]With Worksheets("Sheet1")[/COLOR]
[COLOR=#333333]Set rng = .Range("B" & I)[/COLOR]
[COLOR=#333333]Set Btn = .Buttons.Add(rng.Left, rng.Top, rng.Width, rng.Height)[/COLOR]
[Code]....
The following code is my Zip macro:
VB:
[COLOR=#333333]Sub Zip()[/COLOR]
[COLOR=#333333]Dim strDate As String, SavePath As String, sFName As String[/COLOR]
[COLOR=#333333]Dim oApp As Object, iCtr As Long, I As Integer[/COLOR]
[COLOR=#333333]Dim vArr, FileNameZip[/COLOR]
[COLOR=#333333]Dim FName() As Variant[/COLOR]
[Code]...
Now, this Zip macro is able to zip the file for the employee "Anthony Tran". However I need it to be able to recognise which employee's button I've clicked and search the same files as above except with that employees name instead of "Anthony Tran".
If it makes things easier, the code for creating buttons for each employee is able to name that button as the employees name that it represents.
I am trying to create a data entry sheet to enter quotes on. When a quote is received, I click on my "Add quote" button and a userform appears. Data is entered into the userform (frmEntryForm) and returned back to the next available row.
I also need to be able to:
Edit a row by double-clicking it. When a row is double-clicked, data from that row is passed back to the userform, edited and returned back to the same row (to prevent duplicates).Validate that all fields are complete within the userform where relevant (i.e. if the work is not complete or in progress then the "Invoice Number" and "Actual Cost" fields are disabled and blanked to prevent entry (I think this is almost sorted judging by my tests)
I have attached my sheet : 2014 Gatwick Quote Log (Macro Enabled).xlsm‎
I have a user form with textBox1 = start time (entered as "[h]:mm") and text Box2 = finish time (entered as "[h]:mm"). I would like textBox3 to display the difference between the start time and finish time as a general number!
For example
Start time: 21:00
Finish time: 06:30
Hours worked: 9.50
Start time: 12:30
Finish time: 23:00
Hours worked: 10.50