I have an worksheet with a UserForm. On this UserForm is a ComboBox with the RowSource set to a named range called lVender. This ComboBox is setup to post & sort new entries into lVender apon exiting the ComboBox.
If a mistake is made and it is not caught before exiting the ComboBox, then I need a way to remove the bad entry from the lVender list.
I have included a small sample to better show the problem.
I'm trying to take a list of names from a worksheet and create in a userform a combobox that lists the names.
Private Sub Combo_Box_Leadoff_Click()
Dim counter As Integer
Combo_Box_Leadoff.Clear
For counter = 3 To 16
Combo_Box_Leadoff.AddItem Worksheets(5).Cells(counter, 2).Value
Next counter
In the properties window, I set the value equal to the first name in the list. The above code yields a combobox that is blank except for the value set in the properties window. When I do not set an initial value, I get a completely blank combobox. I'm pretty new to VBA, and I've manged to figure out all of the macros I need so far, but setting up the user form has proved surprisingly difficult.
I have in "column A" an accountnumber and in "column D" a lastname.
The lastname can appear more than once and the accountnumber also.
Though I want combobox1 on userform1 to contain the lastnames.
It's possible to contain a double lastname as long as the accountnumber isn't the same.
For instance:
accountnumber: Lastname:
1234 Johnson
7890 Johnson
here Johnson will be insert twice into the combobox.
accountnumber: Lastname:
1234 Johnson
1234 Johnson
I have a combobox that populates a dynamic list, but is it possible to also edit or delete those items from within that same combobox?
View 2 Replies View RelatedI have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
View 5 Replies View RelatedThis is a paricular problem I'm having in the middle of lots of problems, hoping you can help.
I had created a macro to transfer information from a sheet into a seperate sheet, for storage.
I have sinced changed the data entry sheet to use comboboxes instead of normal text, as it was important to ensure the text is entered identically each time. Now, however, my macro transfers the numerical position on the list of data for the combobox instead of it's value
I am populating a ComboBox with entries from a Range. The entries have a different Interior.Color depending on whether the individual project represented by the entry is complete. If the entry is complete is has an Interior.Color of blue; if not, it is red. I want to populate the ComboBox with both, but if the Interior.Color is blue, I want to change the font.color displayed in the ComboBox to blue. Just the color of the completed (blue) entries. The other (red) entries can have a normal (black) font. Is there a way to do this?
Here is the code I have been working with, but nothing I have tried has worked. Maybe another strategy, or whatever.
LastRowTF = Sheets("Shipsets").Range("F65536").End(xlUp).Row
Set myArray1 = Sheets("Shipsets").Range("F2:F" & LastRowTF)
For mA1 = 1 To myArray1.Count
If myArray1(mA1).Interior.Color = 255 Then
[Code]...
this problem is just an follow up question to this thread [Solved] VBA : user input to combobox xla. it supposed to be a follow up question but as per RULES is concerned i have to post a new one "4. Never post a question in the Thread of another member. You MUST ALWAYS start you own New Thread.". my question is how to retain the inputted values upon next opening of the workbook? you see that in this thread everytime the userform initialize the values added are also refresh , but what i want is after i manually input an entry of the combo box on next open the values are saved correctly..
View 5 Replies View RelatedI have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.
View 2 Replies View RelatedI'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
I have a user form with a group of several option buttons. When an optionbutton is selected, programatically, I want a worksheet's named column to be parsed through to find unique entries and then have those entries passed to the form's combobox. I've spent the last hour searching for an answer but to no success
View 3 Replies View RelatedI have a userform created to enter clients information which by submitting goes to sheet1 ..
Now the challenge is i want to make sure that no duplicate entries are entered thru userform.
And if duplicate company name is entered then all the client details of the other fields of the userform shall display the values of previous entry so that i can edit the latest changes to the sheet.
I created a UserForm to populate client billing info and job location info (so it's a two-parter). A clicked button will then populate a spreadsheet with all of the information. That part works fine.
When the client billing info is the same as their job info, I'd like to offer a checkbox that will populate the job info with the billing info rather than having to type everything twice (like you see on online billing and shipping orders).
I have a button on my userform that I would like to clear all entries in column B in a sheet called "6 Entries" when pressed
Is there a code for this ?
I have a userform that I use for data entry with lots of combo boxes, list boxes and text boxes
One thing i haven't cracked yet is to check for duplicates against two matching fields
If a user (for example) enters 'SAB' (which will be stored in column A) and then 'UK' (which will be stored in column B) and there is already an exact match for both, then I need to inform the user that a matching record already exists
The following is OK: (the dots below are meant to illustrate spaces between the columns!!)
Col(A).....Col(B)
SAB........UK
SAB........USA
SAB........Italy
BUT, if a user then tries to enter:
Col(A).....Col(B)
SAB........UK
I need my userform to register a duplicate entry.
My sub routine is detailed below : .....
I've have been building a UserForm for data entry into a stock demands system. One of the data entry items is a text box asking the data-inputter to complete a field containing the items drawing reference from the technical manual. The field can be quite long, and is often repeated for multiple items within the same drawing. Unfortunately, a ComboBox item would be have far to many items to make it useful, and so the TextBox item was preferred for this task.
My problem is that I need the TextBox to be able to recall/remember previous entries that have been saved to the data sheet in the workbook and the UserForm is cleared and closed down.
I need the information that is entered in a userform to be sent to a separate worksheet. Each time a user fills out the form, I would like the information to be documented on the next completely open row (ex. first form goes in row 2 (column headings are in row 1), second form goes in row 3, etc.). I don't know a ton when it comes to VBA, but I believe I have the code figured out to search for the next open row. Column A will always have data in it.:
Code:
dim currentrow as range
set currentrow=Range("A1").end(xldown).offset(1,0).entirerow)
What I can't figure out is how to insert the information to the correct columns. Each column has a header to it, and I would like the data from the userform to be put in the relevant column each time it is filled out.
For example, if column A's header was "First Name" and columm B's header was "Last Name", each time the form is filled out, I would like the first and last name (which was entered in the form) to be inserted into those columns (with each form entry on a separate row).
I think there might be a way to use the intersect method to find the row/column combination I'm looking for, but I'm not exactly sure how to do it. Using the first name example from above, it would basically look for the intersection of "currentrow" and column A, and insert the value that is entered into the userform.
I've been trying to code this user form so that when the appropriate command button is pushed, the Inventory Number is populated the amount of times indicated by the "multiplier" number.
I haven't gotten very far successfully. Mostly runtime errors.
Here is a screen shot of my table, along with my non working code.
Private Sub cmdfront_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Scanned")
I have a user form with 10 textboxes on and when you press the command button, VBA will send the values in each text box to a cell on the sheet. If a user only wants to enter one value, it zeroes all the others in that row!! Does anyone have any ideas please in very very basic lamens code!! It is only relating to the user form called "Figures1". I had an if command running in the "decweek1" modules, but it makes my procedure too long to do the same with the other one!
If you look at my code, you can see how unadvanced I am with this so really simple code would be gratefully received!! If anyone feels nice enough you could always write the code for this problem for me and send me back the workbook, however I don't expect anyone to do this!
It is too large to attach so it is here:-
[url]
Is there a way i could put a validation on a text box that doesn't allow the user to enter a value that already exists in a given range. The object being to avoid duplicate entries.
View 5 Replies View RelatedIs it possible that i fill the CB.list with range().value so the values are in Column 'A' and in Column 'C' and if i enter the field and select value then i see value from column 'A' & value in Column 'C'?
Then if i pick one value then the CB.value = the value from Column 'A' only, Can i solve it some how?
Carrying on from my calculation problem which now has been solved i am needing help with comboboxes
i have a combobox21 which i have made a dropdownlist ie Types of products from Product1 to Product 16 inclusive (i have sorted this)
i also have another 28 comboboxes, which of the 16 products i pick in combobox21 i need each of the other 28 comboboxes to display the the sub products
products and sub products are stored on sheet1 in the excel file as below
A B C D
1 Product1 Product2 Product3 Product4 etc .........
2 P1A P2A P3A P4A
3 P1AA P2AA P3AA P4AA
4 ETC ETC ETC ETC
So if i pick Product1 in Combobox21 then in each of the other comboboxes i need to be able to select P1A OR P1AA ETC .....
i have a named range of products A1 to O1 Called PRODUCTS
i will have to create 16 mores ranges for the items in each product but that is no problem
I have 2 combobox in userform. Both the comboboxes have the same list down value and I have applied as follows
VB:
combobox1.value = "Transport"
combobox1.value = "Paper"
combobox1.value = "Pencil"
Like this I have long list
In the combobox2 same list has been applied
Is there a way in which by one command the list is applicable to both the comboboxes, that would save me on the length of VBA.
I have a userform that I wish to be a front page for a work sheet containing personal staff information. I would like it to self populate according to a selection from a combo box (Surname). So far I am using the code below however where this code encounters those with the same surname it only displays the first row it comes across. Each row does have a staff ID number that is unique but I cannot search by this on its own as it would not be user friendly.
VB:
Private Sub ComboBox1_Change()
Dim r As Range
Set r = Sheet2.Range("A:A").Find(What:=ComboBox1.Text, lookat:=xlWhole, MatchCase:=False)
If Not r Is Nothing Then
[Code] .....
I need to base a combo box / TextBox on the result of the previous combo box.
1. The first combo box is a simple 2-option: "New" or "Exisiting" choice
2. If the answer is "New"; I need a TextBox to show which would allow the user to input a code
3. If the answer is "Existing"; I need a second combobox instead of the text box which will allow a selection of codes.
I want it to populate a combobox in a userform. Should it go in the code segment for the userform, in a module, or some other place? The following is code I originally found (by Leith Ross of this board) to find the last row in column "A", and load the combo box "ComboBox1"
View 3 Replies View RelatedI have a userform with a textbox and a combobox
textbox input will be a house number
combobox will be a list of all the street names that have that house number in my database
column Q are house numbers, column R are street names
when a user inputs a number into the textbox and tabs to the combobox,
for each cell in column Q of workbooks("proposals.xls").worksheets("database") that has the textbox1.value I want the cell value of .offset(0,1) to be added to the combobox.
I have more problem when work with three combobox, will you find me the code to solve this problem.
View 2 Replies View RelatedBasically I want it to look similar to the vehicle search on auto trader, or whatcar, where you first chose the make, then use a second combobox for the model (dependent on the choice made in the first combobx.
View 6 Replies View RelatedI am trying to add a list of items to a combo box which is in a user form using vba. Find the file as attached. My code is as follows: when i double click on the combo box it opens editor.( 4th item: Frequency )
Private Sub ComboBox1_Change()
With .ComboBox1
.AddItem "Y"
.AddItem "M"
.AddItem "D"
End With
End Sub