In A Userform Displaying Combobox Entries

Jan 14, 2007

I'm trying to take a list of names from a worksheet and create in a userform a combobox that lists the names.

Private Sub Combo_Box_Leadoff_Click()
Dim counter As Integer
Combo_Box_Leadoff.Clear
For counter = 3 To 16
Combo_Box_Leadoff.AddItem Worksheets(5).Cells(counter, 2).Value
Next counter

In the properties window, I set the value equal to the first name in the list. The above code yields a combobox that is blank except for the value set in the properties window. When I do not set an initial value, I get a completely blank combobox. I'm pretty new to VBA, and I've manged to figure out all of the macros I need so far, but setting up the user form has proved surprisingly difficult.

View 3 Replies


ADVERTISEMENT

Displaying More Than One Column In A Userform Combobox

Dec 10, 2009

I have a combobox on a userform that I have set the columncount to 3, so it displays data from columns A, B, and C when the combobox dropdown is used. However, once someone makes a selection from the dropdown, only the item from the first column is displayed in the combobox. Is there a way for me to show the info from all 3 columns once a selection is made?

View 8 Replies View Related

Romove Unwanted Entries From UserForm ComboBox

Jun 20, 2006

I have an worksheet with a UserForm. On this UserForm is a ComboBox with the RowSource set to a named range called lVender. This ComboBox is setup to post & sort new entries into lVender apon exiting the ComboBox.

If a mistake is made and it is not caught before exiting the ComboBox, then I need a way to remove the bad entry from the lVender list.

I have included a small sample to better show the problem.

View 9 Replies View Related

Displaying Blank Entries In A Formula?

Jul 22, 2014

I am trying to display a blank entry as a blank instead of Jan 00. I have tried the following formula but no joy?

=IF''"&$A30&''!B:B"="";"";MAX(INDIRECT("'"&$A30&"'!B:B))+$B$4)

View 14 Replies View Related

Message Box Displaying Some Entries In A Range

Apr 30, 2009

I have a range (A5:DG5). Some of these cells are empty, some are populated.

I would like to display a vbYesNo box that shows the value of each populated cell on a different line, with no gaps for non-populated cells.

View 9 Replies View Related

Listbox Displaying Empty Entries At The End Of The List

Oct 22, 2009

Is there anyway to prevent an empty entry from showing up in a list box?

And pending that the above is possible is there a way to exclude the first value a column?

I want all values in column A except A! to display that aren't blank.

View 14 Replies View Related

Checking Data Against 3 Criteria Then Displaying Results In Combobox?

Jan 3, 2013

using a command button to input data back into the spreadsheet at a specific location.

Background: I am building a time clock spreadsheet, of sorts. I have a user form that provides a list of volunteer names in a combobox and then a list of activities they can perform in another combobox. Some activities have Details. (So, VolunteerName Todd can choose Activity Maintenance, which has no details; Volunteer Joe can choose Activity Teaching and then can select Details Intermediate 2.) The volunteer then clicks a SignInCommandButton.

The SignInCommendButton populates a worksheet (VolunteerLog) with the following information:

Column A: Volunteer Name
Column B: Today's Date
Column H: Exact Time In
Column E: Activity
Column F: Details, if populated

The SignInCommandButton also copies a formula from cell L2 into the appropriate row of column C (Time In) that rounds the Exact Time In to the nearest 15 minutes. The SignInCommandButton then does a Copy/Paste Special Values to remove the formula from column C and then resets the Userform.

What I need to do:

1) When the person first selects their name from VolunteerNameComboBox, I want to check 3 things:

a) whether the person's name exists in Column A of the VolunteerLog worksheet;

b) if it does, if the Date associated with that entry = Today; and

c) if it does, if the Time Out column is Blank.

If all three conditions are met, I want the ActivityComboBox to populate with the values in Column E and F, if necessary. The user will then click the SignOutCommandButton. (details in a moment)

I already have the code for if the conditions aren't met (Activity box populates and, depending on the selection in the Activity box, the Details box may appear for a selection to be made, or may remain hidden.)

2) The SignOut Button needs to enter the Time into Column I of the appropriate row found in (1) above. It will also need to copy the rounding formula I mentioned earlier, and do the Paste Special, but I have that already.

For (1), I think I have a start. My thinking is to first check if the Name selected in VolunteerNameComboBox is in the VolunteerLog. Each time it shows up, I'd like to add it to a list (range?) called rngSignedInDate. Then I'd loop through all the entries in that range checking if the Date = Today. If it does, then I'd add it to a list called rngSignedOut and loop through those results to see if Column C (Time Out) is blank.

I think I have the first loop, but am stuck on how to populate the results into rngSignedInDate. Here is the code:

Code:
Private Sub VolunteerNameComboBox_Change()
'Check if the Volunteer has signed in already
Dim strVol As String
Dim rngSignedInVol As Range
Dim rngSignedInDate As Range
Dim rngSignedOut As Range
Dim rngSignedInActivity As Range
Dim rngSignedInMatch As Range

[code]....

(2) I haven't started working on the SignOutCommandButton. The challenge for me with that is directly tied to the challenge in (1). If someone does pass all 3 tests, I need to have that specific instance defined in a way that I can have the SignOutCommandButton put the time in the appropriate row.

View 4 Replies View Related

No Double Entries For Combobox

Dec 18, 2007

I have in "column A" an accountnumber and in "column D" a lastname.
The lastname can appear more than once and the accountnumber also.
Though I want combobox1 on userform1 to contain the lastnames.
It's possible to contain a double lastname as long as the accountnumber isn't the same.

For instance:
accountnumber: Lastname:
1234 Johnson
7890 Johnson

here Johnson will be insert twice into the combobox.

accountnumber: Lastname:
1234 Johnson
1234 Johnson

View 9 Replies View Related

Edit Combobox Entries From Within Itself

Feb 19, 2007

I have a combobox that populates a dynamic list, but is it possible to also edit or delete those items from within that same combobox?

View 2 Replies View Related

Displaying Graph In Userform

Jan 25, 2014

I have a spreadsheet and am in the middle of creating a userform to display the results of data over a given period (period selected by user).

In that userform I would like to display a graph (the graph will be created behind the scene once the date range has been selected). Is there any way that the graph can be displayed on the userform? If so, how?

View 1 Replies View Related

UserForm Not Displaying Correctly

Jan 29, 2009

I have built a UserForm (Excel 2003) that looks up a Row dependant on Criteria and displays the values on the User Form.

View 9 Replies View Related

Userform Loads Combobox Values Upon Userform Initialize

Oct 1, 2009

I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.

View 5 Replies View Related

Macro For Copying Combobox Entries To Another Sheet

Aug 15, 2009

This is a paricular problem I'm having in the middle of lots of problems, hoping you can help.

I had created a macro to transfer information from a sheet into a seperate sheet, for storage.

I have sinced changed the data entry sheet to use comboboxes instead of normal text, as it was important to ensure the text is entered identically each time. Now, however, my macro transfers the numerical position on the list of data for the combobox instead of it's value

View 14 Replies View Related

Font Color For Individual Entries In ComboBox

Oct 5, 2012

I am populating a ComboBox with entries from a Range. The entries have a different Interior.Color depending on whether the individual project represented by the entry is complete. If the entry is complete is has an Interior.Color of blue; if not, it is red. I want to populate the ComboBox with both, but if the Interior.Color is blue, I want to change the font.color displayed in the ComboBox to blue. Just the color of the completed (blue) entries. The other (red) entries can have a normal (black) font. Is there a way to do this?

Here is the code I have been working with, but nothing I have tried has worked. Maybe another strategy, or whatever.

LastRowTF = Sheets("Shipsets").Range("F65536").End(xlUp).Row
Set myArray1 = Sheets("Shipsets").Range("F2:F" & LastRowTF)
For mA1 = 1 To myArray1.Count
If myArray1(mA1).Interior.Color = 255 Then

[Code]...

View 1 Replies View Related

Save Values Of Added ComboBox Entries

Oct 27, 2006

this problem is just an follow up question to this thread [Solved] VBA : user input to combobox xla. it supposed to be a follow up question but as per RULES is concerned i have to post a new one "4. Never post a question in the Thread of another member. You MUST ALWAYS start you own New Thread.". my question is how to retain the inputted values upon next opening of the workbook? you see that in this thread everytime the userform initialize the values added are also refresh , but what i want is after i manually input an entry of the combo box on next open the values are saved correctly..

View 5 Replies View Related

Userform Combobox Value Selects Next Combobox To Appear

Dec 2, 2009

I have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.

View 2 Replies View Related

Userform - Second Combobox Based On First Combobox

Apr 9, 2012

I'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.

Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And

[Code] ........

I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.

I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'

For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...

View 6 Replies View Related

UserForm Controls Not Displaying At Runtime

Feb 2, 2005

I've created several UserForms, for some reason this one won't co-operate!

Issue are:
1. Have to click the OK button 3 times for the code to execute (this does not occur when I filter through the code in debug/F8 mode).

2. Before processing I have a label and image set to visible = true that won't appear on the form at runtime (this works when I filter through the code in debug/F8 mode).

View 7 Replies View Related

Displaying Userform & Running Macros

May 11, 2006

I am copying web data into Excel and need a creative way to run a couple formatting macros on the data. I’m looking for the best way to initiate the macros. I cannot use command buttons because they’ll get deleting as a result of the line “DrawingObjects.Delete”.

I’d like to use a Useform with a couple buttons but am not sure how to have it automatically display when needed and hidden when not needed. I also prefer not using toolbars button unless they will only be displayed in that workbook and not any others.

View 9 Replies View Related

Displaying Selection From Listbox On Userform

Jul 21, 2006

I have been trying to create a "Search" or "Look Up" form for my database. ( Attached file - "Test - Form").

I have been given a lot of help/ideas from this forum with which I managed to get to the stage where I could select the criteria i wanted to search by using a combobox and textbox in the userform. On hitting the "Find" button it shows all the results in the listbox.

The trouble started when I tried to display the listbox selection on the labels at the bottom of the userform. As the listbox is small and cant show all the fields properly, I need to display them in labels once user selects a particular record from listbox.

I managed to find some examples of this from this forum. (file attached "Action Log"). As I am not an Excel/ VBA expert, I have missed something and am not able to make it work.

View 9 Replies View Related

Fill ComboBox With Unique Entries Based On OptionButton

Feb 5, 2008

I have a user form with a group of several option buttons. When an optionbutton is selected, programatically, I want a worksheet's named column to be parsed through to find unique entries and then have those entries passed to the form's combobox. I've spent the last hour searching for an answer but to no success

View 3 Replies View Related

Return Focus To Sheet While Still Displaying A UserForm

Dec 16, 2009

I have a spread sheet where i want to display help text when cells are activated. I do not want to use comments as i both do not like the red triangle and also have not found a way to controll the position of the text box. When I use the event Worksheet_SelectionChange I can display a custom box but the box "retains focus" and i can not enter the data until i "reclick" on the cell in the sheet. The box then goes away when i select another cell. Is there a way to fix this or a different method entirely. I am using Excel 2007.

View 9 Replies View Related

Problem Displaying Single Record In Userform Listbox From Recordset

Jul 20, 2009

I am trying to populate a 3 column listbox in a userform from SQL Server via ADO. When the result set consists of more than one record, there is no problem and the data is displayed properly (ie each piece of data is in its appropriate column) eg...

StockCode..........QtyReqd.........JobDeliveryDate
test1...................1................. 01/01/1900
test2...................1..................31/12/1900
test3...................3..................18/02/1900

however when the recordset returns only a single record, the data does not transpose and views as below (ie each piece of data in the record is on a different line in the first column

StockCode...........QtyReqd.........JobDeliveryDate
test1
1
01/01/1900

View 12 Replies View Related

Userform - Controlling Duplicate Entries?

Jun 23, 2014

I have a userform created to enter clients information which by submitting goes to sheet1 ..

Now the challenge is i want to make sure that no duplicate entries are entered thru userform.

And if duplicate company name is entered then all the client details of the other fields of the userform shall display the values of previous entry so that i can edit the latest changes to the sheet.

View 3 Replies View Related

Replicate Text Entries Within UserForm

Jun 16, 2009

I created a UserForm to populate client billing info and job location info (so it's a two-parter). A clicked button will then populate a spreadsheet with all of the information. That part works fine.

When the client billing info is the same as their job info, I'd like to offer a checkbox that will populate the job info with the billing info rather than having to type everything twice (like you see on online billing and shipping orders).

View 5 Replies View Related

UserForm 'Clear Entries' Button

Nov 7, 2008

I have a button on my userform that I would like to clear all entries in column B in a sheet called "6 Entries" when pressed

Is there a code for this ?

View 9 Replies View Related

Userform VBA To Check 2 Columns (A And B) For Duplicate Entries

Apr 23, 2014

I have a userform that I use for data entry with lots of combo boxes, list boxes and text boxes

One thing i haven't cracked yet is to check for duplicates against two matching fields

If a user (for example) enters 'SAB' (which will be stored in column A) and then 'UK' (which will be stored in column B) and there is already an exact match for both, then I need to inform the user that a matching record already exists

The following is OK: (the dots below are meant to illustrate spaces between the columns!!)
Col(A).....Col(B)
SAB........UK
SAB........USA
SAB........Italy

BUT, if a user then tries to enter:

Col(A).....Col(B)
SAB........UK

I need my userform to register a duplicate entry.

My sub routine is detailed below : .....

View 3 Replies View Related

Userform TextBox - Remember Previous Entries?

Oct 25, 2012

I've have been building a UserForm for data entry into a stock demands system. One of the data entry items is a text box asking the data-inputter to complete a field containing the items drawing reference from the technical manual. The field can be quite long, and is often repeated for multiple items within the same drawing. Unfortunately, a ComboBox item would be have far to many items to make it useful, and so the TextBox item was preferred for this task.

My problem is that I need the TextBox to be able to recall/remember previous entries that have been saved to the data sheet in the workbook and the UserForm is cleared and closed down.

View 9 Replies View Related

Send Userform Entries To Separate Worksheet?

Jul 1, 2013

I need the information that is entered in a userform to be sent to a separate worksheet. Each time a user fills out the form, I would like the information to be documented on the next completely open row (ex. first form goes in row 2 (column headings are in row 1), second form goes in row 3, etc.). I don't know a ton when it comes to VBA, but I believe I have the code figured out to search for the next open row. Column A will always have data in it.:

Code:
dim currentrow as range
set currentrow=Range("A1").end(xldown).offset(1,0).entirerow)

What I can't figure out is how to insert the information to the correct columns. Each column has a header to it, and I would like the data from the userform to be put in the relevant column each time it is filled out.

For example, if column A's header was "First Name" and columm B's header was "Last Name", each time the form is filled out, I would like the first and last name (which was entered in the form) to be inserted into those columns (with each form entry on a separate row).

I think there might be a way to use the intersect method to find the row/column combination I'm looking for, but I'm not exactly sure how to do it. Using the first name example from above, it would basically look for the intersection of "currentrow" and column A, and insert the value that is entered into the userform.

View 2 Replies View Related

Coding A Userform To Create Multiple Entries

Mar 18, 2008

I've been trying to code this user form so that when the appropriate command button is pushed, the Inventory Number is populated the amount of times indicated by the "multiplier" number.

I haven't gotten very far successfully. Mostly runtime errors.

Here is a screen shot of my table, along with my non working code.

Private Sub cmdfront_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Scanned")

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved