Run Formulas With Macro But Compare Values In Cell
Aug 20, 2014
I have below code which pin out numbers from IBAN in Column P. Its formulas run by macro. It works fine. But what i really need is that instead of putting the formula in the cell, is that it compare the value from the formula, with the excisting value , in each cell . And it mark the cells where there are a difference with yellow colour I have been thinking how to do this but cant really work it out. If some have a better solution its ok but i need a macro for it.
have a look at below code, which change the cell and correct the error, but which i want just to compare the values.
I have .csv file from which the data is importing to master schedule. i have a column in .csv file which is spitted into multiple columns. and my need is i have to compare this each individual cell value with the range of header values in master schedule and if match found i have to place that cell in the row.
I am adding 2 attachments one is .csv and other is master schedule.
I couldn't able to find where i have to attach my files.
I want a macro to compare each value on workbook 1, Sheet "Destroyed", column "C" against each value on workbook 2, Sheet "ERT Master", column "B". For each instance where the value on workbook 1, matches a value on workbook 2, the row where the match is found on workbook 2 needs to be highlighted in yellow from columns A to H. This needs to be repeated for each value in column "C" of workbook 1.
I am currently working for data validation team. I have to validate tons of data every week so it would be great if i could remove dupicates.
I want to compare two worsheets, sheet 1 has the order number with description (which i have to find) for the current month and sheet two has got standard report from the past week giving all the order numbers with no description. I need a VBA based macro to find all matching order numbers which are in sheet 1 column A, in sheet2 column A and return the corresponding value in column B in sheet 2 and also return the description in Column C.
I have an existing macro that copies a worksheet and pastes it into another workbook, renames it and then attaches it to an email. My problem is that it pastes just the values. I need it to paste part of the original worksheet as values and part copy the formulas. So on the new workbook Columns A through F will be values only and G through Z will copy the formulas.
I have never written a macro and when I record one I usually have trouble with the relative references.
I am trying to write a macro to transform formulas into values every month.
I want to transform formulas:
- across a range of tabs: each tab is exactly alike and is named page-1 to page 25 - on a different column every month (same column across all tabs) - on the same rows: L168 to L227 and L266 to L277 (same rows across all tabs)
I have a macro that pastes formulas as values on specific pages (("CTY EME", "Int Center", " Total SW dist cost", "Int, pubs & oth", "Total". Is there a way to compress the macro ie with the sheet names?
I have a spreadsheet and everyday it would change in length.
But I would like a macro that compares the value of each cell in column B against the value in corresponding cell in column D then moves to the next roll - so eg B2 against D2,B3 against D3......B50 against D50 until all rows are compared.
And when it finds a different makes the background colours go red !
I have a bit of a code but I think I need to loop to compare all populated cells !
I am creating a Macro to convert formulas to values on a Datasheet after each entry from a form (worksheet) is carried over. Since each entry will go on a separate row I created formulas to give the new datas location. I just can't get the syntax correct for it to run.
Sub Convert_Formulas_to_Values() Range("Reviews!$B$202").Value: Range("Reviews!$AF$202").Value.Select Selection.Copy[code]....
Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.
I would like to have a dialog box "popup" if the value of two cells do NOT equal.
cell C11 has net sales values for the day, including cash, checks, and credit cards. After sub total of these values, I subtract any charges(voids) and get a total(c11). I enter a sales(c12), tax(c13), no tax(C14), misc. amounts(C15 & C16) ,reductions(c21) and put the total in Cell C22 with the formula =Sum(c12:c16)-c21). Because I do not want the formula overwritten, I protect the sheet including the amounts in cell c11 and c22. If they do "Not" match I would like a dialog box to appear so the error can be corrected.
The value stands for the Periodnumber and a Year so P1'08 stands for period 1 in the year 2008.
In cell H2 I want the following:
If value in cell H1 is the same as B2 or C2 or is in between these periods then the value in H2 should be the value of cell D2. If not the H2 should be empty.
I have two worksheets with products that I need to compare.
Each product has a code and a product name in the following format: Column A has the product code and column D the product name,for example:
ColumnA: AM1BL15X
ColumnD: AGLO MEL BLANCO 1C 15MM 215X244
Both sheets *should* have the same data in them but there are 4000 products that need to have their description verified.So I need to go down each row on Sheet1 , extract the product code from Sheet1.ColumnA and the product name from Sheet1.ColumnD. Then do a search on Sheet2 for the product code (Sheet2.ColumnA) and verify that the product description on sheet2 (Sheet2.ColumnD) is the same as in Sheet1.ColumnD. If it matches,everything is OK. If not there is something wrong. So I´m thinking that maybe the product codes that dont have matching descriptions could be entered in to a separate worksheet so that someone can check it later.
I´ve been reading around and found these code samples from this site [url]:
Dim rng1 as Range, i as Long Dim cell as Range With worksheet("Sheet1") set rng1 = .Range(.Cells(1,1),.Cells(1,1).End(xldown)) End With
i = 0 for each cell in rng1
if cell.Value worksheets("Sheet2") .Range("A1").Offset(i,0).Value Then ' do what - they don't match else ' do what - they match End if i = i + 1 Next
I´ve been trying to make some changes but I dont quite know how to get this working to do what I want and I only get errors.
I have two worksheets with products that I need to compare. Each product has a code and a product name in the following format: Column A has the product code and column D the product name,for example:
ColumnA : AM1BL15X
ColumnD: AGLO MEL BLANCO 1C 15MM 215X244
Both sheets *should* have the same data in them but there are 4000 products that need to have their description verified.So I need to go down each row on Sheet1 , extract the product code from Sheet1.ColumnA and the product name from Sheet1.ColumnD. Then do a search on Sheet2 for the product code (Sheet2.ColumnA) and verify that the product description on sheet2 (Sheet2.ColumnD) is the same as in Sheet1.ColumnD. If it matches,everything is OK. If not there is something wrong. So I´m thinking that maybe the product codes that dont have matching descriptions could be entered in to a separate worksheet so that someone can check it later.
I´ve been reading around and found these code samples from this site ...
I am trying to compare the values in an array with the values in a range of cells. It worked fine until I moved the code into a sub. The specific problem that I am having is that is pulling cell values from "shippablegoodspriorday" and it is supposed to be pulling the cell values from "shippablegoods".
I work for a bank and we use an excel spreadsheet that has an in depth payment calculator used for creating monthly payment arrangements or calculating settlements on bank loans. I would like to add the following feature and I'm not quite sure exactly how to do it.
For example, imagine cell A1 will contain the full payoff of a loan. I want to be able to put a settlement offer in B1 and have C1 populate the percentage of the payoff that is. At the same time, I want to be able to delete the settlement offer in B1 and put a percentage in C1 and have it calculate that settlement offer in B1. The calculations/formulas to do these problems is simple, but what I need is to not lose the formulas in B1 and C1 if I were to go back and forth entering settlement offers vs settlement percentages.
i wonder if there is a way to compare the formulas in two cells and not their result. I use a worksheet as a model and i want to track unwanted changes in the formulas between any new worksheets created and my original worksheet.
'To delete delivery address lines if 1st line empty If IsEmpty(Range("deliver_line1")) _ Then Sheets(1).Range("deliver_rows").EntireRow.Delete 'No End If required as only one action as a result of the If
A spreadsheet based on my template has been sent to me because the macro won't run properly. When I try to run the macro I get a Runtime Error '1004' Method 'Range' of object '_Global' failed on the following line. Columns("A:E") = Columns("A:E").Value.
i have an excel sheet with two columns, and depending on the status of the equipment, i need to compare the two columns and if the data is the same, fine, otherwise i need to display a msg box with an error. the columns have formulas in them, and i assigned a name to the cells i want to check, i keep getting errors with the following code, when the colums are the same, it is still displaying the msg box with the error. what am i doing wrong?
For Each Row In Range("Dev_Found") 'Loop through each row in Column C If Row.Value ActiveWorkbook.Names.Item("Dev_Left").Value Then blah = MsgBox("Your % Dev for after does not match % Dev before, please correct on form!", vbOKOnly, "Error") Exit For End If Next Row
I've attached a sample document of my data layout. On the Compare tab, I'd like to build a sumif formula that takes the data in column B and uses it to reference the other tabs without having to use a large nested IF statement. For example, on the Compare tab, in cell C2, the formula will know to look at the "JAN MONTH" tab because B2 says "JAN", then the rest of the sumif would be looking at the data in column A and matching it with the data in column A in the correct tab.
I would like to rotate a Line Chart 90 degrees. I tried using an XY scatter chart but my Y-axis would be time values which are somewhat random but increasing. I would like to keep the spacing between plot points consistent (Y-axis spacing). I could simply use a number list for my Y-values to get consistent spacing but then I lose the time information. I don’t necessarily need the time value on the Y-axis if I could get the information to display when mousing over the plot point. Any ideas on how I could accomplish this?
I want to design a macro that will compare the student's completed worksheet to the model answer worksheet. This will allow the class to work at different paces depending on ability.
For each exercise, the two sheets should look identical; and so, I would like the macro to highlight any different cells in the student sheet in a colour. I would also like cells with identical values, but different formulas to be highlighted - this is why I could not use the solution posted in : "Compare two worksheets and highlight the one sheet's difference from the other one".
Like u see in attachment i have products in cells wich are painted in different colors. I need to compare two numbers of different product, and write result to column "Type D,C,B". If one of two products is without color/white or they are not the same color then result is always "D", if both products/cells have same color and different number then results is "C", if the color and number is the same then result is "B"
Below cell B2 I will write numbers by hand, when I finish and start macro it will compare first cell B2 and B3 and write result to C3, then compare B3 and B4 and write result to C4 and do that until there is any number in column B:B.
I am trying to modify the macro listed below for the following example. It would work when I have only numerals in the cell but this new query, the cell has both letters and numbers.
I want to compare column "M" from worksheet one to column "B" in worksheet two. If the information matches, then copy the value adjacent from worksheet two column "A" to worksheet one column "L".
Here is the macro that worked for me using a search of only numerals.
figuring out why the data doesn't copy?
Macro:
Sub merge_accession_PS_rad_productivity() Dim rng2 As Range, c2 As Range, cfind As Range Dim x, y With Worksheets("Imaging_Summary") 'N4=Accession on Imaging Summary worksheet
