Macro To Transform Formulas Into Values Across Multiple Tabs
Feb 7, 2014
I have never written a macro and when I record one I usually have trouble with the relative references.
I am trying to write a macro to transform formulas into values every month.
I want to transform formulas:
- across a range of tabs: each tab is exactly alike and is named page-1 to page 25
- on a different column every month (same column across all tabs)
- on the same rows: L168 to L227 and L266 to L277 (same rows across all tabs)
View 6 Replies
ADVERTISEMENT
Feb 26, 2013
I trying to use the formula below to add values across multiple tabs but I am getting a value error. I think it is just a small punctuation thing.
=SUM(INDIRECT("'"&REF!$A$2:$A$3&"'!&$F$62"))
REF is the name of my references tab and has a list of the tab names
View 1 Replies
View Related
Mar 11, 2014
I want my macro to transform the cells whom values are visible into pure value no formula "behind them". I have simple multiplication formulas in those cells. If The result of a multiplication is 0 and I format that cells to not show me that 0 with "0.000;-0.000;;@" the macro still deletes the formula from that cell.
[Code] .....
View 2 Replies
View Related
Jun 10, 2008
there is a ONE column containing data. it looks like 7 rows of content, 2 blanks, 7 rows of contant, 3 blanks etc. there can be more than 1500 rows in this document.
i am looking for a macro which would copy these 7 VERTICAL rows in 1 column and transform them into a NEW HORIZONTAL ROW IN 7 COLUMNS.
step by step it would be like:
- copy 7 rows in 1 column
- transform it into 1 row, 7 colums and put it ONE ROW ABOVE THE ORIGINAL
- delete original 7 rows in 1 column
i did macro by recording the whole action but it works only for first repeat. it does not work then because the macro keeps the row number and rewrites the content. i would need a macro which works independently of the row number.
View 9 Replies
View Related
Mar 13, 2012
I would like this Macro to run on 6 different tabs in a worksheet as one Macro. It is currently only running on the active sheet. The tabs that I need it to run on are labeled "Totals" "New" "Used" "Service" "Parts" "Other Income-Ded"
Sub ExpenseAnalysis2012()
Dim rngSource As Range
Dim rngDestination As Range
Set rngSource = Range("D3:E90")
Set rngDestination = Cells(3, Columns.Count).End(xlToLeft).Offset(0, 2)
rngSource.Copy
rngDestination.PasteSpecial (xlPasteValues)
End Sub
View 2 Replies
View Related
Sep 10, 2007
I'm not very good with macros and I need to create a macro that copies data from one excel worksheet into multiple other worksheet tabs in the same workbook. I have 8 columns and thousands of rows of data. The spreadsheet is sorted by column E.
In column E, there are about 25 different values going down throughout the spreadsheet. I would like the data for each of these Column E categories to be copied over to a new tab in the spreadsheet with the tab name as the value in E. So in the end there would be the main tab, and then 25 new tabs with the filtered data. Does anyone already have a macro that will do this?
View 9 Replies
View Related
Feb 19, 2010
I'm trying to figure out how to create a macro for a project at work. Basically, think of a spreadsheet with 5 tabs, but the information in Tab 1-Column D is the same in Tab-4 Column D and Tab-5 Column D. When I insert a row, though, I have to go to each tab, insert the row, and copy down the formulas from the row above to ensure the flow-through stays true. This can get very tedious.
Does anyone have a template or tips on a macro that would, in essence, work like this:
a) Highlight the row above which a row should be inserted
b) Trigger the macro
c) A row is inserted above the highlighted row in Tabs #1, #4 and #5
d) The information from the row above the inserted row is copied down to the new row in each of the three tabs.
View 6 Replies
View Related
Jul 20, 2014
I am trying to create a workload spread sheet for work I need to have the same looking spread sheet 365 times but also need each sheet to be dated, EG (tue,01/04/2014 through to tue,31/03/2015) I can create 365 tabs that have the same spread sheet on and I can create dates but not do both at the same time, it isn't fun doing copy and paste 365 time.
View 1 Replies
View Related
Feb 21, 2014
I have 2 workbooks. The workbooks have 36 tabs for each department. Workbook 1 are current charges for the departments and workbook 2 is the revenue for each department. I would like to take the top 2 rows from workbook 2 and add them to workbook 1 at the bottom of each tab. I was able to get it to work to a specific row but the workbook 1 has variable rows for each tab.
View 3 Replies
View Related
May 13, 2014
I need to list only the unique values in a range found in multiple columns. Some cells are blank. I need to list all the unique values in numeric and/or alphanumeric order in another column within the same worksheet. I would prefer non-array formulas, if possible. See the attached file.
In the attached table, I have 5 columns and 5 rows of values in the range B2:F6. The unique values, in order, are 0, 1, 2, 3, 4, 5. This looks simple and can be done manually if the file is small but I have 150 columns and 150 rows, thus the need for automation.
List of unique values in multiple columns 2.xlsx
View 4 Replies
View Related
Dec 3, 2013
I want to convert multiple sections that contains formulas to values. Usually i did this by coping range of cells, and paste as Values. But now i have multilple sections and excel doesn't allowe me to copy multiple sections. (i can not use clipboard, because there are more than 2.5 k rows)
View 7 Replies
View Related
Nov 3, 2009
I am trying to make a button that will re-initialize the workbook: clear (delete) all unlocked cell's values. I have the following
View 5 Replies
View Related
Jun 8, 2006
found a great macro which copies data from multiply worksheets and pasts them onto master sheet.
I have adjusted the macro to my spreadsheet, but my macro should past formulas as values.
View 4 Replies
View Related
Jul 17, 2009
I want to have a summary tab calculate figures of other tabs. For example in "Summary" tab, I want to Sum (a:a) for tab "January" =January!sum(a:a)
Does not work. I have also tried other options as well. Is it possible to use formulas when referencing other tabs.
View 5 Replies
View Related
Jul 17, 2009
The "summary" tab will be calculating 20 statistics for each of the 30 or more tabs. In an effort to automate this - can I replace writing "January!" with a cell reference? For example;
instead of writing = sum(january!a:a). Could I write = sum("A1"a:a), with the A1 Cell = january!. Obviously I tried this and it does not work but I am not sure if there are other options.
View 2 Replies
View Related
Oct 4, 2011
I am currently working through a macro and got stuck about halfway. I have a number of files in a folder on my drive that I am pulling the first tab from into a Master workbook, and then I want to have a summary tab for all of those tabs(they are all identical). Some of the cells will be text(say range A5:C105), some will be SUM(E6:G105) and some will be AVERAGE(D6:D104) formulas needed. These formulas will not change, but will need to pull the data from all tabs that are pulled into the file.
So far I have this code that pulls all of the first tabs together:
Code:
Sub Staff_Plan_Update()
Dim wbDst As Workbook
Dim wbSrc As Workbook
Dim wsSrc As Worksheet
Dim MyPath As String
Dim strFilename As String
Call TimeStamp
[Code] ......
I was going to record a macro that creates a summary table every time, but not sure if it is easier to create a blank template for the summary tab that will update every time all of the tabs are pulled into this file. The problem I ran across with that is that I will be taking the SUM of all tabs, but the number of tabs/name of tabs will be different.
View 1 Replies
View Related
Feb 3, 2009
How can I create a macro that will:
Copy a formula in multiple cells to the next cells in each tab that I designate in my workbook.
For example,
I need the EXACT formula in cell N13 to be copied to O13. And then paste special the "value only" back into N13.
I also need the EXACT formula in O19 and O20 to be copied to P19 and P20, respectively. And then paste special the "value only" back into O19 and O20.
Can I have this exact process done in several different tabs within my workbook?
View 6 Replies
View Related
Aug 20, 2014
I have below code which pin out numbers from IBAN in Column P. Its formulas run by macro. It works fine. But what i really need is that instead of putting the formula in the cell, is that it compare the value from the formula, with the excisting value , in each cell . And it mark the cells where there are a difference with yellow colour I have been thinking how to do this but cant really work it out. If some have a better solution its ok but i need a macro for it.
have a look at below code, which change the cell and correct the error, but which i want just to compare the values.
I have attached a sheet to test with.
[Code] .....
Attached File : Testforcompare.xls
View 12 Replies
View Related
Oct 13, 2009
I have an existing macro that copies a worksheet and pastes it into another workbook, renames it and then attaches it to an email. My problem is that it pastes just the values. I need it to paste part of the original worksheet as values and part copy the formulas. So on the new workbook Columns A through F will be values only and G through Z will copy the formulas.
View 10 Replies
View Related
Jun 10, 2006
I have a macro that pastes formulas as values on specific pages (("CTY EME", "Int Center", " Total SW dist cost", "Int, pubs & oth", "Total". Is there a way to compress the macro ie with the sheet names?
Sheets("CTY EME").Select
Cells.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
Application.CutCopyMode = False
View 3 Replies
View Related
May 16, 2012
I am creating a Macro to convert formulas to values on a Datasheet after each entry from a form (worksheet) is carried over. Since each entry will go on a separate row I created formulas to give the new datas location. I just can't get the syntax correct for it to run.
Sub Convert_Formulas_to_Values()
Range("Reviews!$B$202").Value: Range("Reviews!$AF$202").Value.Select
Selection.Copy[code]....
View 4 Replies
View Related
May 9, 2013
I have attached sample sheet.
I need to populate the Rep Names looking up 3 Criteria (Client Id,Curr Cov Id,Dom Buy Grp Id) from the Table 1, either one matches the Rep Names has to populate.
The data has to be pasted on WIP_Sheet in different columns.
View 3 Replies
View Related
May 13, 2008
I have a macro running this code to strip out unwanted formulas and formatting.
Sub Quote_Wrapup()
'To stop screen flicker
Application.ScreenUpdating = False
Range("CDandC").ClearContents
Range("qdata5,qdata6").Font.ColorIndex = 2
'To delete delivery address lines if 1st line empty
If IsEmpty(Range("deliver_line1")) _
Then Sheets(1).Range("deliver_rows").EntireRow.Delete
'No End If required as only one action as a result of the If
Range("Item_Nos").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Columns("A:E") = Columns("A:E").Value .........................
A spreadsheet based on my template has been sent to me because the macro won't run properly. When I try to run the macro I get a Runtime Error '1004' Method 'Range' of object '_Global' failed on the following line. Columns("A:E") = Columns("A:E").Value.
View 4 Replies
View Related
Jun 22, 2006
Is it possible to make multple worksheets from a selection of multiple cells?
This would mean a selection of 10 cells would generate 10 sheets titled with the cell conent.
View 14 Replies
View Related
Feb 17, 2010
In a workbook some of the numbers I have to use are in format: 12,50. How can I modify the formula so it transforms it to 12.50 (so that excel knows this is a number)? I am getting the values with:
View 7 Replies
View Related
Jun 27, 2014
I have multiple sheets and a summary sheet in the beginning. and i need to populate the min value / max value and the avg value for every sheet into the summary sheet.
Example i have a column of numbers in column G and i need the min , max and round(avg) for all sheets in the first summary sheet.
View 2 Replies
View Related
Mar 13, 2014
I need to transform many text (that Looks like numbers) in to numbers. The thing is that, there is an option to search for errors in the "formulas" menu, but I want a code in vba that I can run.
so in conclusion the thing is:
1. look for text that "looks like" numbers
2. turn them into numbers
View 11 Replies
View Related
Apr 23, 2009
Is there a ATransform or replace command in Excel. i have a value of 04/23/09 which is a date and would like to replace all "/" with "-' thereby making the value 04-23-09. I could examine each character value within a cell but this would just make a long coding and would like to know if there's a shorter way to do this?.
View 4 Replies
View Related
Jan 20, 2003
I have a spreadsheet which has data in the format of
Name
Address
City
State
Zip
Phone
This appears in the form of rows. How do I make the data in a table meaning,,,
Name Address City State Zip Phone.
View 4 Replies
View Related
May 30, 2014
I have a spreadsheet of multiple entries per person. I need to calculate the total per person and have only one entry per person of different character variables within one column. For example:
Jon Smith Fair
Jon Smith Assignment
Jon Smith Fair
Nancy Drew Info
Nancy Drew Info
Rachael Smith Notes
Turned into this:
Name
Fair
Assignment
Info
Notes
Jon Smith
2
1
0
0
[Code] ........
I can already calculate a 1 or 0 for each row with =SUM(IF(A2:A3442=A2, IF(D2="Fair"))). Which creates a 1 or 0 in each row labeled for each entry but I do not know how to create a new spreadsheet with just one entry per person with the totals for each column.
View 3 Replies
View Related
