I would like to make the SUMIF function conditional on recognising 1 word among a series of text within a cell.
For example, SUM all cells containing word PINK, even if there are other words in the cell also.
I cannot get the SUMIF function to pick words out of a cell, it will only SUM up if the whole text matches what is in the cell.
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies View RelatedI have a worksheet where two columns of data are written. In another worksheet I have a list of data in one column. In column next to it (so the rows are the same) I am trying to write a list of sumif formula, where the range is first column of the first worksheet, condition is a value of the cell next to where I am writing the sumif equation (list of data) and the sumrange is the second colummn in the first worksheet. I can't get it. I tried with --- "C" & i --- but I get an error saying expected:end of statement. It goes like that:
View 2 Replies View RelatedI am trying to use the SUMIF function in excel where I want to sum a range of cells greater than whatever is in cell D8. Here is what I tried to use, but it doesn't work. SUMIF(A2:A10,>D8,B2:B10)
The content in D8 can change because the user makes a choice from the drop-down list and a number pops up in D8 that is referenced to their choice.
I am having a formatting issue within a cell. I would like to accomplish a TAB space between to words so they always have the same space between, no matter how many characters the words or numbers have.
Example: I insert text and numbers from different cells in to one.
Formula: ........
It looks like this... so far so good.
25.02.2014 EUR 5'600.00 1.2177 CHF 6'819.12 Withrawal
But if i insert multiple lines with higher or lower amounts the formating goes wrong.
25.02.2014 EUR 5'600.00 1.2177 CHF 6'819.12 Withrawal
26.02.2014 EUR 10'000.00 1.2212 CHF 12'212.00 Deposit
The target would be to keep straight lines like with the TAB in Word.
snap-tab.jpg
I know there is no TAB whitin excel cells, but maybe there is a way to set a default charachter lenght that can be forced even if the amount or the text is shorter.
How can I use the IF function, to make entering a word, space then word display correct and incorrect if not.
View 13 Replies View RelatedHow do I name my data series in a chart so that the name consist of both a cellreference and my own text?
Example: "Name" & Sheet1!A1. If the value in A1 is 2 then the series name shold be Name2
I am trying to sum elements of a column only if the cell in the same row but different column has ANYTHING typed in it. Easy one, but we all have those days
View 1 Replies View RelatedI have a spreadsheet where I need to sum some cells where the cell contains text and a number.
For instance, if the cell contains an "A", then I need to sum the numbers in those cells. If "S", same thing. Is there a way to use a SUMIF with right(text,1) since the number in each cell will always be a single digit?
I don't know how to copy an Excel table to a Post.
A
B
C
D
E
F
G
1
MON
TUE
WED
THU
FRI
A-Used
S-Used
2
S-4
A-8
A-4
12
4
3
A-6
6
Is there a way to use =sumif to sum if the cell has the word you are searching for plus other words you haven't identified.
For instance if I have =sumif(a1:a3,"vacant",a:a) , is there a way I can sum if the cell has "Vacant until next week" without me typing the next week"
I have attached a sample spreadsheet.
I would like to use a formula that will pull values into a sum where the values are in a column and the category is in another column. The criteria in the text cells could be located anywhere in the cell.
Example:
Column A Column B
xyzyszt (Baseline) 7890
wrxyz4sdtr (Strategic) 1234567
zecgjioae (Baseline) Infrastructure 71235
qpielcmjj ae (Strategic) New Capability 278332
I'm trying to make a spreadsheet to organise my bank statements. I have raw data from online banking and I want to sum all the transactions that have "SAINSBURYS" in, for instance. I am using SUMIF to add the totals only if "SAINSBURYS" on the totals page matches "SAINSBURYS" on the raw data page. The problem I'm having is that the raw data cell doesnt just display "SAINSBURYS" but "SAINSBURYS LONGWATER BCG 12345678" for example, and so i cant find a way for SUMIF to recognise that it contains "SAINSBURYS".
View 5 Replies View Relatedi have group of different set of data represented in Rows, and between each set there is 2 empty rows
i want my macro to go certain column W, where type of data is set, and title these group by placing that name in A column cell, that's just before first Row of set of data
Pool
Date
Cost
Time
Type
[Code]...
but please note that number of rows of each data type is variable could be 2, 3, or whatever
i need the Macro to name each set, with SuperMarket, Cloths .. etc
I am looking for a formula or multiple formulas to perform an If/Then statement, adding and dividing. Example listed below.
If O8 = 'Y' then perform XXXX, otherwise, do nothing.
XXXX= in Y8 search for word 'apple' and add tally to AA46, in Y8 search for word 'orange' and add tally to AA47, in Y8 search for word 'banana' and add tally to AA48.
Take AA46/Y46 and put results in AB46.
If this could be put into on cell and perform all the needed actions, otherwise, multiple cell formulas is ok.
I have a long list of client names in individual cells eg: A2 = Garden Homes Summary, A3 = Lakeland AG Summary etc etc. However I need to extract the client name without the word summary in it.
I know how to do this on an individual basis, but as there is a long list and different number of letters in each one.
I am looking for a syntax or function wherin i can replace all lines in different cells containing specific string or text in it. e.g. Few cells in sheet contains " This guy is for deployment", other few cells may contain "guy is for core deployment" and other cells may have " project is specific deployment". I want to replace all such lines which contain a word "deployment" with ony one word "Deployment".
View 7 Replies View Relatedi have a drop down list in cell b16 it has suppliers names in and it has several which are not all one word ie "monk and crane" the thing is that in cell d29 i have a drop down list that is dependant on whats in cell b16 in cell b16 i am using another data validation list using the code
View 2 Replies View RelatedI have a long list of process steps in a collumn e.g.
A
_Tank1_CIP
_Tank1_CIP
_Tank2_CIP
_Tank4_CIP
_Tank_9_CIP
and then i have a list of tanks: Tank1, Tank2 etc. The i want a forumla to extract and return the tank in a adjacent cell:
A B
_Tank1_CIP Tank1
_Tank1_CIP Tank1
_Tank2_CIP Tank2
_Tank4_CIP Tank4
_Tank_9_CIP Tank9
I need to pull a specific word from a string of text in a cell and have that word shown in an adjacant cell. For example A1 will contain the text "Smith Sun Alliance Pension Fund" I need B2 to show "Pension". I cannot use any filtering or text to columns as the word Pension can be anywhere within the text in A1 and I have thousands of entries. So I need a function.
View 9 Replies View RelatedI have a weird problem with Excel. It recognises all numbers as numbers but excluding the number 1. It is only recognised as text as well as a decimals, for example 3.4. So every time I try and add these values up it completely ignores 1 and decimals.
Have I modified a setting?
I have a workbook with three worksheets - 1st is an event register, 2nd is a calender (manually done, with no formulas due to format problems I couldn't solve), 3rd is a summary.
I am trying to work out the following;
The first column of the 1st sheet (event register) requires a date.
The second column requires an 'event', from a drop box or list (of seven possibilities). These are working fine.
Is there a formula I can use theat when a user enters a date, say 1 Jan 08 (or the format is "Thursday, 1 January 2008") AND a certain event, say "CALL" that this will automatically populate the next worksheet (calender) on that corresponding date (1 Jan 08)?
There are seven possibilities for each date (eight including "blank" or ""), which I am sure I will be able to extend to each day of the calender once I work this formula out.
I have already formulated the second worksheet (calender) to count the freqency of events into the third worksheet (summary). Hopefully these wont effect the formula I am looking for.
Work shifts run on a four-week, 28-day cycle always beginning on a Monday.
In 2009, the first such cycle began on Monday 12/1/09.
In my 2003 worksheet, I have the current year in A1. I want the date of the beginning of the first cycle in that year to appear in B1. This should update automatically when the year in A1 is updated.
How do I paste a text paragraph into Excel and give each individual word into its own cell?
View 6 Replies View RelatedI am trying to do, is paste a word in front of text that is already residing in cell throughout an entire column, and then automate this process by creating a macro that will do the same thing for me throughout an entire column. To best explain this, it woudl be like if you have a column 100 rows/cells long, and every cell already contains data. I need to insert something in front of what lies within each cell.
View 9 Replies View Relatedhow I can have excel determine what array or predetermined group a piece of data belongs to as it loops through it.
For example...
Say I import the A column via .csv file, I want to then run a macro that recognises the data and then catergorise it... the desired outcome would be the red text in the C column.
I want to be able to added the variable members to each group as such, I'm presuming this is best by a declaration.
I'm trying to calculate and average using a time frame in the day. I want to use a certain number "X" that correlates to a hour/minute in the current time. How do I write a statement to get me the correct "X" value?
example:
8:00 .005
8:01 .006
8:02 .0075
8:03 .0077
8:04 .008
time now is 8:03
How do I get the .0077 in excel?
I have a series of procedures I am calling from a function that each run fine when executed individually. These procedure are titled: DataValidation, Test1, Test2
The function will not run past Test2- I do not get the msgbox "Stage 2"
Code:
Public ArrayD
Public ArrayD2 As Variant
Public RngD3 As Range
Public Function Test(arg2 As Range)
DataValidation arg2
[Code] ............
I have used the MAX function to populate the most recent date in a series.
-EX. the most recent date input into the cells S8, T8, U8 will populate in cell R8. There is a default value of 0-Jan-00 that automatically populates in cell R8 as a result of the MAX Function. Any value that is input into cell S8, T8, U8 will show in cell R8 immediately after being input as a result of the MAX Function.
I need cell R8 to remail blank until the last of cells S8 or T8 or U8 has been input (in no specific order). Once the last cell has been filled; it is only at that time I need cell R8 to show that most recent date input into any of cells S8 or T8 or U8. I can't hide the column, I need cell R8 to remain empty until the last of the three cells- S8, T8, U8 has been filled (the last cell filled will not always contain the largest value or most recent date).
Is it possible to export Excel cell contents to Word fields in a protected Word document? For example...
What code would be needed to tell Excel to open up, copy and export the contents of A2 in the active sheet of a workbook to "Field 2" in a Word document named "Report 01" and then put the contents of B2 to "Field 2" etc?
Do both applications have to be opened up at the same time or is Excel able to open up Word on its own? Will the macro be able to....
1. Automatically open up the correct Word document?
2. Look ONLY in a certain folder for the "Report 01" Word document?
or
Bring up a "selection" box that allows you to select the document you wish Excel to export it's data to?
3. Close and save the Word Document without any user intervention?
I need to count how many times the word Test is in the range B4:H9 with
Range N2 = Test the formula below works if Test is only in the cell once.
=COUNTIF($B$4:$H$9,"*" & N2 & "*")
But I have data in cells like below, this is all in one cell, so how would I have it count all the times test is in the range when some cells have test 2 or more times in a single cell?
5
Test
8am-2pm
Test
5pm-10pm