# Sumif Function Condition Cell Value

Nov 24, 2009

I have a worksheet where two columns of data are written. In another worksheet I have a list of data in one column. In column next to it (so the rows are the same) I am trying to write a list of sumif formula, where the range is first column of the first worksheet, condition is a value of the cell next to where I am writing the sumif equation (list of data) and the sumrange is the second colummn in the first worksheet. I can't get it. I tried with --- "C" & i --- but I get an error saying expected:end of statement. It goes like that:

## Function Sumif() That Used For Do Sum() Under Condition

Jan 9, 2007

There is a function sumif() that is used for do sum() under condition

Nevertheless, if I want to do max() under condition, how can I do?

There isn't a function maxif().

## Adding Another Condition To Sumif Function?

Jan 8, 2014

Below is my function.

="Profit \$"&SUM(IF(Sold!D15:D8998<>"",IF(MONTH(Sold!D15:D8998)=A4,Sold!H15:H8998)))

I would like to edit this function to also count profit only if Cell A15:A8998 in my Sold sheet has the words "Shipped". The text value Shipped is not a text value I entered, it is automatically written based on a Vlookup formula I created.

## Formula- To Pull Cell Values Similar To A SUMIF Function (SUMIF(range,criteria,sum_range))

Oct 25, 2007

I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.

## SUMIF Function: Sum A Range Of Cells Greater Than Whatever Is In Cell D8

Jul 18, 2006

I am trying to use the SUMIF function in excel where I want to sum a range of cells greater than whatever is in cell D8. Here is what I tried to use, but it doesn't work. SUMIF(A2:A10,>D8,B2:B10)

The content in D8 can change because the user makes a choice from the drop-down list and a number pops up in D8 that is referenced to their choice.

## IF Function With A Condition From Reference Cell?

Feb 19, 2014

I'm trying to write a formula that would filter data from one column based on condition entered in a cell. This one works great with single numbers or text in a reference cell:

=IF((a2=C\$3);a2;"") copied down the column

but if I try to filter all numbers greater than 2 (I eneter ">"&2 in cell c3) it doesnt work. Is it possible with if formula or should I use something else?

## SUMIF Function: Recognising 1 Word Among A Series Of Text Within A Cell

Aug 8, 2002

I would like to make the SUMIF function conditional on recognising 1 word among a series of text within a cell.
For example, SUM all cells containing word PINK, even if there are other words in the cell also.
I cannot get the SUMIF function to pick words out of a cell, it will only SUM up if the whole text matches what is in the cell.

## SumIf With More Than One Condition

May 12, 2009

I'm trying create a Sum(If formula with 2 conditions, but whatever I try doesn't seem to want to cooperate. I want to add up the sum of all invoices according to the country they deal with and the month that they were created in. I've attached a sample file showing what I'm trying to accomplish. Here is how far I've gotten so far: =SUM(IF(Main!\$L:\$L;B21*Main!\$Z:\$Z;C20);Main!\$H:\$H)

I've tried other forms as well but even though this only returns #Value!, at least the formula is accepted.

## SUMIF With More Than 1 Condition

Dec 3, 2006

Is there any way to use sumif with or , in other words to put more than one condition to execute the sum process

like this way :

+ sumif(search range;condition1;condition2;sumrange)

I tried but I had an error.

## Sumif With Condition Similar?

Oct 22, 2013

When you filter a spreadsheet, you can find results that are similar to a condition. I have families of products that share a common 3 digits, but the rest of the model number is different. The 3 similar digits could be the first 3 digits, or it could be 3 digits starting with the 2nd digit. This spreadsheet has each complete model number on its own row. In that row is a number that represents a volume. I want to be able to sum the volume column if the model number contains the 3 digits.Model Number
Volume

A hat
5

B hat
1

A glove
4

hat
8

In the above example, the total for "hat" = 5 + 1 + 8 = 14

I would type in a condition (family name) into another cell (D1) and the formula in D2.

## SUMIF If More Than One Condition Is True

Mar 26, 2007

I want to perform a SUMIF if more than 1 condition is true. I can do a regular SUMIF if, for example, values in column A is > than 10,000, then SUM associated values in column F.

However, what if I want a SUMIF if values in column A is > 10,000, values in column B = “Yankees”, then SUM associated values in column F.

## Multi Condition Sumif

Apr 14, 2008

Is there a way to have a sumif formula dependent on two conditions?

## SUMIF Statement With A AND Condition

Jun 27, 2006

I have a problem with a SUMIF statement. I think it is =SUMIF(AND(...

I have attached I want to sum in column E lines 255-316 if in cell D 34 and if cell B25 equals GL and cell C255 equals 0001.

Maybe this would be handled better with a sumproduct formula...

## Sumif With Bold Condition

Jun 1, 2007

As a starter in VBA i have a lot of doubts... one of them is, how can i sum in a column the cells that are bold? i've thought that sumif was the trick, but i don't find the way to be able to adapt code.

## Nested IF Function - Condition Is Based On Two Values Within A Cell

Mar 10, 2014

I am working on creating a simple Excel Database of an Engineering Tool Room Inventory for work. However I can not seem to get one particular 'NESTED IF Function' to do what I want it to do. (In advance warning, I may be going down the wrong route and might have used the wrong Formula in Excel but from my understanding the 'IF' function seemed the most plausible.

Issue: All I would like to do is for a NESTED IF Function to be able to say this:

1. When a user inputs data into one column, for example 'Column A', with the following data: 4" Square
2. Then the neighbouring column, for example 'Column B', would have a NESTED IF Function.
3. Which would output a logical response, "A, B, C, D, E, F etc...", depending on what is written in Column A.
If 'Column A' - 4" Square, Then 'Column B' - A
If 'Column A' - 5" Square, Then 'Column B' - B
& So on...
But the NESTED IF Function should only put a logical response if there is certain values within the cell, for example:
User types a value into 'Column A' which contain - 4 & S, Then 'Column B' - A
User types a value into 'Column B' which contain - 5 & S, Then 'Column B' - B
& So on...

Currently to do the above function, I have utilised the following Excel NESTED IF Function:

[Code] .....

& The following happens:
1. User inputs data into 'Column A'
2. The NESTED IF Function then provides an automatic response.
3. However it relies on the data being inputted without the ' " (Quotation Symbol)'
4. & With me defining the exact phrase that should be typed into the cell, for example, "4" Square"

Other: I have attached an example worksheet of the NESTED IF Function in practice, with two tables. One showing what is happening with the code above and one table showing what I would like to happen but with no function.

Example - IF Function.xlsx

## SUMIF While Checking Each Array With Condition

Jul 19, 2013

I currently have a Row with this value

row1 lh lh lh
row2 8 12 8 5 2

First I will need to check if the column has an "lh" if true then sum row2, however i will need a second condition that will check that if >8 it will use the value 8 instead of 12.

However if value is<=8 get that value from the cell.

In this case the correct answer is
8 + 8 + 5 = 21

8 (because it is <=8 get the value from the cell) + 8 (because 12 is>8 use the value "8") + 5 (because <=8)

## Multiple Condition SUMIF: Sum The Values Between Q77:Q176

Jul 19, 2007

I want use the formula sumif...something like that! =SUMIF(I77:I176;AND(>F1092;<F1091);Q77:Q176). I want sum the values between q77:Q176 if the value in i77:i176 is >F1092 and <F1091 But the multiple criteriun don´t work in the sumif.

## SUMIF Function To A Particular Value

Apr 17, 2009

I am trying to used the sumIF function in refer to a particular value, e.g. Name 1.

Question 1 - What formula I can used to make sure the SUMIF function refers to that specific value, e.g Name 1?

Question 2 - Is my SUMIF function correct to calculate the SUM of hours to a Task? This is due to the data table setting? find attached:

## Sumif Function.?

Jul 14, 2009

I am using Excel 2003. Worksheet named: Table_Data has the following code in cell: B2

## Sumif Or Other Function

Nov 6, 2009

Sum amts based on first left character of code
code amts
102 100
200 500
101 100

results
1 200
2 500

## Cell Equals 0 Changes When Condition Met - Leave Unchanged When Condition False

Mar 24, 2014

I am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.

The Cell formula that I am trying to use is as follows:

=IF(YEAR(\$A\$3)<2014,"0",(IF(YEAR(\$A\$3)>2014,H114,(IF(MONTH(\$A\$3)<>2,H114,AA118)))))

A3 contains TODAY()

H114 is the cell being calculated

AA118 is the cell containing the calculated value for the current month.

## Macro For A Sumif Function?

Aug 19, 2013

I'm having a little problem with the function Sumif. I have data like this:

Date
0
0

Total
0
78[code]...

I want to some all the Totals that appear before the "End Notification" text. I have more totals after that text and the number of rows are variable.

In my data, I have always 4 totals before that text, so I thought perhaps that the way to do this would be to impose to the sumif function to stop summing after counting 4 totals. I didn't find a way to do that.

I thought a little more on the problem and I find out that the easy way would be to record a macro with the sum if function, where, in the range part, I would do a Find for "End Notification"; and select all the cells to the top of the sheet. The problem is that the macro dont record that part, only the row number.I think I need to turn the range a variable, where the variable is equal to the find selection.

## Dynamic Sumif Function

Jun 3, 2009

I'm trying to create a sumif formula that finds the column the information is in that it needs to sum. I have attached a copy of the file I'm trying to create a formula to get results that I want.

Generally you would normally use the "=SUMIF(range,criteria,sumrange)". I was wondering if there was a formula I can substitute "sumrange" to also search a range of data (Eg: "G16:DA28"). I need the range to be dynamic as the column to be sum can change based on the criteria/option button being selected from the product category. I assume there is an indirect function involved, but I am not familiar with it. If you have a better and less complicated formula please suggest.

## Arguments In A SUMIF Function

Sep 4, 2009

I’m using a SUMIF function to evaulate some date. The second argument in the function, the criteria, is that the numbers to be summed are greater than 25 but less than 50.

## Add A Twist To The SumIf-function

Dec 12, 2006

I want to add a twist to the sumIf-function, and need some help. My request is similar to lots of other sumIf-issues posted here, which were resolved with the sumproduct-function, but is a little bit different.

## How To Sumif With Year Function

Feb 27, 2012

How do I sumif on the amount in column A when the year in column B is 2010?

## Sumif With Offset Function?

Jul 2, 2014

I was wondering if there was a way to use sumif and offset to guide the summing column in the example below. Perhaps I need to add an additional column, then formulate a solution. I want to sum the daily returns for the TSX when the slope is positive (green), and sum the S&P when it is negative. Currently, on signal day, I am summing that day's return, which I don't want to do. I want to sum starting on the next day (blue). The B column switches back and forth from positive to negative, so I will summing different data periods going back 1000 days. I am summing the TSX returns and S&P returns seperately to make it easier. Currently I have in C1=(sumif(b2:b1000,">0",c2:c1000)) Same for D2.

Date
Slope
TSX
S&P

sumif
sumif

06/30/14
0.002774
0.34%
0.19%

[code]....

## Double SUMIF Function

Sep 1, 2006

I was wondering if it is possible to have a double sumif. For example asssuming you have a table with three columns:
Col 1 (far left) is called Name
Col 2 (middle) is called date
Col 3 (far right) is called values

Now assuming that column 1 contains 4 different names, each repeated for each date in column 2. In turns the dates are repeated for each names (see below example)

Name Date
AAA Jul 06
AAA Aug 06
AAA Sep 06
BBB Jul 06
BBB Aug 06
BBB Sep 06
CCC Jul 06
CCC Aug 06
CCC Sep 06

Column 3 contains random values.

How can I sumif column 1 at the same time as column 2 (i.e. sumif for criteria AAA and Aug 06). Or if not possible is it possible to write a double Vlookup?

## SUMIF Function In VBA Macro

Sep 18, 2007

I have a macro[A] that sums a column based on parameters passed to it from another macro[b]

Macro A

Sub SumColumns(varASheetName As Variant, varFormulaCell As Variant, varSumRange As Variant)

Sheets(varASheetName). Range(varFormulaCell).Value = Application.WorksheetFunction.Sum(varSumRange)

End Sub

' Macro B

Call SumColumns("DebtorsRaw", "D10", Range("D21", Range("D65536").End(xlUp)))
End Sub ...........

## SUMIF And SUMIF Not - Using Two Formulas In One Cell

Feb 27, 2012

I am wanting to use these two formulas in one cell. Is there anyway to do this? If "AD3" is 0 I want this =SUM(X3:AC3) and then if cell "AD3" is greater than 0 I want to basically use this formula