I am having a formatting issue within a cell. I would like to accomplish a TAB space between to words so they always have the same space between, no matter how many characters the words or numbers have.
Example: I insert text and numbers from different cells in to one.
Formula: ........
It looks like this... so far so good.
25.02.2014 EUR 5'600.00 1.2177 CHF 6'819.12 Withrawal
But if i insert multiple lines with higher or lower amounts the formating goes wrong.
The target would be to keep straight lines like with the TAB in Word.
snap-tab.jpg
I know there is no TAB whitin excel cells, but maybe there is a way to set a default charachter lenght that can be forced even if the amount or the text is shorter.
I need to count how many times the word Test is in the range B4:H9 with
Range N2 = Test the formula below works if Test is only in the cell once.
=COUNTIF($B$4:$H$9,"*" & N2 & "*")
But I have data in cells like below, this is all in one cell, so how would I have it count all the times test is in the range when some cells have test 2 or more times in a single cell?
I would like to make the SUMIF function conditional on recognising 1 word among a series of text within a cell. For example, SUM all cells containing word PINK, even if there are other words in the cell also. I cannot get the SUMIF function to pick words out of a cell, it will only SUM up if the whole text matches what is in the cell.
1. I have a excel file with Japanese words in column A and their English equivalents in column B.
2. I am trying to create a Macro and assign it to a button. On pressing the button Macro should be able to:
3. open a form where I can enter location of a word file.
4. Macro should open the word file specified in (3).
5. Macro will pick up first Japanese word from excel file (Sheet 1 - A1)
6. Search for that word in Word file
7. Replace the Japanese words in Word file with their English equivalent from excel (B1)
8. Then it should search for second word (A2) and replace with its equivalent (B2) and so on till it reaches last filled cell in excel file column A.
After a lot of search I could find a code from net (Below), made a few changes, but it is not working.
======================================================== Private Sub OK_Click() ' Requires a reference to Microsoft Word xx.x Object Library Dim sFile As String
I searched the forum the last couple of days and got the following formula: =RIGHT(TRIM(E3),FIND("~",SUBSTITUTE(E3," ","~",LEN(TRIM(E3))-LEN(SUBSTITUTE(TRIM(E3)," ",""))))-1)
However that is leaving: "228 PENICILLIN VK 250mg 28". Unfortunately I need to get rid of all of the first word.
I'm having issues with some coding to work in excel 2003, 2007 & 2010 which will ensure that if cell E3 is changed to anything except "pool_car", then cell D12 is changed to 0.00.
So if a user originally selects "pool_car" in E3 and then enters a figure in D12 (which they are allowed to do using data validation), if they then choose to change the car type in E3, that D12 is then cleared of the figure they entered for the "pool_car".
I'm already using a similar code to clear other cells if another changes but am uncertain of who to change this coding or write other coding to suit.
I have one problem with my excel table exportation to .docx word document. I got 2 questions.
1) When I paste a Cell Range from my excel, it pastes well but leaving a double line spacing between the rows and I don't know how to re format this table for just having normal line spacing between lines.
Code: Dim order_num As String Dim last_row As String
I am in the middle of automating a process here at work, the program takes a word, "pencil" for example, from excel. It will then open up a word document with content already in it (premade template). The program will then find all instances of a string, "placepencilhere" for example, and will replace that instance with the string from excel.
Basically I want to be able to take a variable that has a stored string value from excel and use it to replace another variable in a word document.
I tried recording a replace (ctrl+f, replace tab) macro, copying the code, and inserting it into the excel vba code.. but I get a error message. Here is what I have:
I need to convert numbers to text in excel 2007. I have done it before in 2003, but can't seem to remember exactly what I used. I may have used some kind of conditional formatting, but not sure.
Here is an example of what I need.
If I type "7203" in a cell I want "Home Repairs" to appear. I have a list of words associated with a list of numbers and want to be able to type the number in a cell and have the word appear.
Currently I am working on a system uploading data from word(with what i think has a script) into a database one by one.(template of somesort) the data is stored into the database in word format.
can i place all the data in rows then get excel to transfer cell content into word and wait for it to upload then clear the contents(word) then do the next row(excel) until it did every cell that's filled? do i need any other applications for this one or can excel alone do it? i'd also like to add a new tab to excel for the command on when excel will do this.
Is it possible to export Excel cell contents to Word fields in a protected Word document? For example...
What code would be needed to tell Excel to open up, copy and export the contents of A2 in the active sheet of a workbook to "Field 2" in a Word document named "Report 01" and then put the contents of B2 to "Field 2" etc?
Do both applications have to be opened up at the same time or is Excel able to open up Word on its own? Will the macro be able to....
1. Automatically open up the correct Word document?
2. Look ONLY in a certain folder for the "Report 01" Word document?
or
Bring up a "selection" box that allows you to select the document you wish Excel to export it's data to?
3. Close and save the Word Document without any user intervention?
I have a bunch of cells in column b that have products.
Column B Dell 24" lcd vaio sony laptop 8.0 mpxl kodak camera photoepsonprinter
Basically in Column A I want a formula that'll say.
If the word "dell" is somewhere in cell b1, then put the word "Dell" in cell a1. If the word "sony" is somewhere in cell b1, then put the word "sony" in cell a1.
And then so on and so forth down through column A. The brand names are potentially endless, so is there a easy way to on like a seperate sheet make a list of brand names and have it pull from there?
Originally I made a if function that said if the brand name was contained in the cell then output the brand name, but that caps at 7 for the amount of brands i can use....
I am trying to use a count if function for a specific word and a time range or number. so On Sheet 1 (called Raw Data) I want to check for the word annuity in Column H -
If it is present I want the formula to then check if the corresponding time in column C is within a specific hour.
I am trying to create an IF function that searches for the word "No." I have created a table with monthly payments and if the payment is >= 0, it returns the word Yes. If the payment is
I want to convert an excel spreadsheet into an excel addin file so that users may use the embedded generations of knowledge as excel functions. Unfortunately, I have a problem. I can create macros that allow me to change cells within the spreadsheet and as a result calculate useful values etc, but when I change these macros into functions VBA generates an error wherever I try to change the value of a cell. This appears to be a feature of excel VBA programming. Is there a workaround?
To illustrate what I am trying to do:
The intial spreadsheet (say it is called "MatProps.xls") contains many complicated formulae that calculate material properties. There is a nice user interface where the user enters temperature etc. and there is an output cell where the materials viscosity appears. I want to create a function for example:
Visc(temperature)
If the spreadsheet is saved as an addin, then the user can enter a formula such as:
= visc( 200 )
or = visc ( A2 )
in a new spreadsheet. The function "visc" needs to be able to set the value of the temperature input cell in "MatProps.xls" and then read the viscosity value from the output cell. If "visc" is defined as a subroutine (hence becoming a macro), the input cell can be changed, the output read and everything is hunky dory. When "visc" is changed to a function, VBA can not set a value in the input cell.
I have an excel program that is supposed to count word instances in a word document. I can't seem to find the right declaration for a word document. For example to declare a workbook in excel its
Dim wb As Work Book
I've tried
Dim doc As Word.Document 'or Dim doc As Word.Application
as shown in some of the forum posts, but an error user-type not defined keeps displaying.
in the cell A1 i want to visualize the cell A1 of second file in the cell A2 i want to visualize the cell A13 of second file in the cell A3 i want to visualize the cell A25 of second file
i explain: in the first file i need a column that in each line show the first cell + 12, then +24, then +36.
file 1 is 1.xls file 2 is 2.xls for example A1 have the value 1
if in 1.xls cell A1 I insert =[2.xls]worksheet1!A1 and in A2 =[2.xls]worksheet1!A1+12 in A2 i obtain the value of A1+12=13, but i need to obtain the valour of A1+12=value of A13.thanks
What I wanted was to a function, say, "=LastModifiedDateOf(CELL)", where CELL, is a parameter that indicates the cell I want to monitor. If the value of such cell ever gets changed, the cell containing the function has its value updated to the current date.
E.g. A1 = "AA" A2 = "=LastModifiedDateOf(A1)" -> "10/03/2011 10:30:32"
Assume you have a rectangular range. Say A1:M18. There are values in some random cells (any number of cells) within the range. The rest of cells are blank. In cell M19 (ie cell below the bottom right corner of the range), I need a excel function that returns the nearest (ie physical location) non blank cell value. I have searched the internet for weeks. The closest formula is the following (see below) but it is flawed as it returns zero if there are values in rows below the row of the nearest cell with non blank...and also zero if there is value in a column greater than the column of the nearest cell with non blank.
Closest formula so far: INDEX(A1:M18,LARGE(IF(ISBLANK(A1:M18),"",ROW(A1:M18)),1)-ROW(A1:M18)+1,LARGE(IF(ISBLANK(A1:M18),"",COLUMN(A1:M18)),1)-COLUMN(A1:M18)+1).
And the function should be relative not absolute as the range can be extended..but the location of the formula remain same relative to the array size. (ie. always at below the right bottom cell).
NOTE: Ignore the special case where two non blank cells are the nearest. That will not happen.
I'm working in Excel 2010. I'm trying to create a dynamic range, using the OFFSET function. I've got it working beautifully but as soon as I save it and close the Name Manager the range stops working. When I go back into Name Manager I find all the cell references have changed (from C1:C600 to C1048572:C595 - or some other strange range).
P.S. What it's doing isn't so important as when the cell references are right it works. But just for full info: It's an OFFSET function, starting at A1. It will look at a list of companies and use a Match function to find out how many rows to offset (based on where the first instance of a particular company. And it uses the COUNTIF to make the range the same number of rows as there are entries for that company.
i have a set of data in excel.. i want that, when i click a command button on an active worksheet, it will be transferred in ms word all the data found in excel.
I'm having trouble using the worksheet copy command in a VBA subroutine. I have the following line in my code:
[Code] ........
When I step through my code and execute this line, the sheet is copied as expected and put in the correct place, but then instead of the next line of code being highlighted, the pointer jumps to the first line of a function (in a different module) in my code.
I have this excel sheet which I want to export to a word document. The following code has been used:
[Code].....
It creates a word document but it only copies and pastes a picture of the excel sheet. I want for the user to edit the word document values that are pasted from the Excel sheet. I know I need to change somewhere in the:
[Code] .....
How can I paste values from excel to word that can be modified inside of word?
ALSO:
How can I change the layout of the word document, for example if I want to add a header and a footer?
I am creating an order checklist in Excel. I want it that if the sales rep clicks on a certain field that a macro will populate the form that is needed. If the rep does not click on that box then the certain form will not be populated. Is this possible?
I have a database list, and run a bunch of formatting, inserting, formulas etc., to be able to have a Word Mail Merge be able to run against the data when finished. I'm automating the process and want to be able to open the Word document when the Excel piece is done, so the user doesn't have to navigate to the file manually.
Since Excel doesn't seem to automatically 'see' Word docs in the Open File dialog list, my Open File code below is getting an error of "File Format is Not Valid":
ChDir "O:UAIBDCustomer RelationsIDHome Office Indexing" Workbooks.Open Filename:= _ "O:UAIBDCustomer RelationsIDHome Office IndexingID Home Office Indexing Mail Merge Template TESTING.docx"
